“Simpson Strong-Tie ABU66Z ABU ZMAX Galvanized Adjustable Standoff Post Base for 6×6” has been added to your cart.
View cart
Showing 41–80 of 99 results
-
Standard Shipping
$1.99
Features:
- Holds the rafter or truss on both sides for high lateral load resistance
- Used for a variety of connections where one member crosses another
- Can be installed on inside or outside of wall, or both sides
- Can be installed with flanges facing either inward or outward
- Made from 18-gauge steel
-
Standard Shipping
$2.29
Features:
- An indented embedment line ensures accurate embedment depth
- Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
- Load rated for wind and seismic forces
- 12-in. exposed length
- Embed 4 in. into a poured concrete bond beam or grouted block wall
-
Standard Shipping
$13.49
Features:
- Suitable for retrofit applications
- The embossments add stiffness in crucial areas for improved performance
- Simple to install and can be installed on the inside or outside of the wall
- Load rated to resist high-wind forces
- 2-ply
-
Standard Shipping
$53.96
Features:
- Attaches a post to existing concrete for decks, patio covers and other top-supported structures
- Features 1-in. standoff to help prevent rot at post end
- Slotted for adjustability
- Designed for versatility, cost-effectiveness and maximum uplift performance
- Nominal post size: 6×6
-
Standard Shipping
$2.41
Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- Speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: 2×10, 2×12, 2×14
-
Standard Shipping
$5.29
Features:
- One-piece, wrap-around clip ensures uniform holding capacity
- Threaded end is chamfered for ease of starting nut
- Diameter: 5/8 in.
- Length: 10 in.
- Made from zinc-plated carbon steel
-
Standard Shipping
$4.42
Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- Speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: Double 2×10 and Double 2×12
-
Standard Shipping
$30.43
Features:
- Provides a positive connection for a post to a wood deck
- Stronger than angled nailing or screw fastening
- Reduces the chance of the post splitting and eliminates nailing into end grain
- Not recommended for non top-supported installations (such as fences or unbraced carports)
- Nominal post size: 6x
-
Standard Shipping
$8.12
Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- Speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: Triple 2×8 and Triple 2×10
-
Standard Shipping
$3.37
Features:
- One-piece, wrap-around clip ensures uniform holding capacity
- Threaded end is chamfered for ease of starting nut
- Diameter: 3/4 in.
- Length: 6-1/4 in.
- Made from zinc-plated carbon steel
-
Standard Shipping
$35.93
Features:
- SDS-plus shank power setting tool for DIAB anchors
- For use with Simpson Strong-Tie Drop-In models DIAB50, DIABL50, and DIAB50C
- Sets drop-ins for overhead applications
- Drop-in anchors are sold separately
- Made from carbon steel
-
Standard Shipping
$0.74
Features:
- A versatile and easy-to-use mending plate for wood-to-wood connections
- These non-structural connectors are ideal for general fix-up work
- Installs without nails; align wood with arrows at joint and hammer plate to embed prongs
- Used for non-structural applications only (not for truss applications)
- Width: 2 in.
-
Standard Shipping
$0.96
Features:
- Bolt diameter: 3/8 in.
- Dimensions: 2 in. x 2 in.
- Made from 3/16 in. steel
- Uncoated steel construction
-
Standard Shipping
$2.24
Features:
- Qualified for static and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
- Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
- Hex-washer head requires no separate washer and provides a clean installed appearance
-
Standard Shipping
$53.96
Features:
- Extra optional triangle holes for additional load
- HUC-series hangers are tested, load rated and code compliant
- Install wood joists to wood, masonry and concrete
- Seat width: 4-11/16 in.
- Nominal joist size: Triple 2×10
-
Standard Shipping
$46.82
Features:
- Attaches a post to existing concrete for decks, patio covers and other top-supported structures
- Features 1-in. standoff to help prevent rot at post end
- Slotted for adjustability
- Designed for versatility, cost-effectiveness and maximum uplift performance
- Nominal post size: 4×6
-
Standard Shipping
$26.71
Features:
- The nailing pattern allows for nailing to the edges of double 2x’s
- Strap nail slots are countersunk to provide a lower nail head profile
- The slots below the embedment line enable increased front-to-back concrete bond and help to reduce spalling
- Standard strap length: 26-1/8 in.
- Made from 12-gauge steel
-
Free Shipping
$210.59
Features:
- Sized to fit nominal 2x lumber
- Packaged in lightweight cartons
- Length: 150 ft.
- Made from 16-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
Standard Shipping
$5.31
Features:
- Qualified for static and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
- Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
- Hex-washer head requires no separate washer and provides a clean installed appearance
-
Standard Shipping
$18.35
Features:
- Provides a positive connection for a post to a wood deck
- Stronger than angled nailing or screw fastening
- Reduces the chance of the post splitting and eliminates nailing into end grain
- Not recommended for non top-supported installations (such as fences or unbraced carports)
- Nominal post size: 6x
-
Free Shipping
$603.93
Features:
- Semi-automatic and fast cycling
- PT-27 is Compatible with Simpson Strong-Tie powder loads and pins
- Fastener length: 1/2? 2-1/2 in. (3 in. washered)
- Fastener type: .300 in. or 8 mm-headed fasteners or 1/4-in.-20 threaded studs
- Load caliber: 0.27 strip loads, brown through red (levels 2?5)
-
Standard Shipping
$4.20
Features:
- Qualified for static and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
- Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
- Hex-washer head requires no separate washer and provides a clean installed appearance
-
Standard Shipping
$20.24
Features:
- SUL = skewed left
- Can accommodate joists skewed 40 to 50 degrees
- Angled nail slots direct nails for proper installation
- Nominal joist size: 2×10 or 2×12
- Made from 16-gauge steel
-
Standard Shipping
$16.04
Features:
- The minimum effective shank length must equal or exceed the sum of the thickness of the attached material and the minimum embedment depth
- Code listed per ICC-ES ESR-2138, Florida FL15730 and LA RR25469
- Compatible with Simpson Strong-Tie powder-actuated tool systems as well as other common tools
- .300-in. head diameter / .157-in. shank diameter
- 1-in. washer
-
Standard Shipping
$2.13
Features:
- Straps are load rated with the correct thickness and number of fasteners, in contrast with field-fabricated straps
- Loads have been increased for wind and seismic forces
- Floor-to-floor clear span application
- For use on the edge of 2x members
- Length: 24 in.
-
Standard Shipping
$20.24
Features:
- SUR = skewed right
- Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist
- These hangers cannot be modified but will accommodate a 40 degree to 50 degree skewed joist
- Available with the acute flange turned in to accommodate end-of-wall installation for solid sawn sizes only (SURC or SULC)
- Nominal joist size: 2×10 or 2×12
-
Standard Shipping
$3.05
Features:
- Qualified for static and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
- Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
- Hex-washer head requires no separate washer and provides a clean installed appearance
-
Standard Shipping
$5.59
Features:
- Can be installed filling round holes only, or filling round and triangle holes for maximum values
- Nominal joist size: 2×6
- Made from 16-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
Standard Shipping
$2.66
Features:
- One-piece, wrap-around clip ensures uniform holding capacity
- Threaded end is chamfered for ease of starting nut
- Diameter: 3/4 in.
- Length: 4-1/4 in.
- Made from zinc-plated carbon steel
-
Standard Shipping
$10.71
Features:
- Attaches a post to existing concrete for decks, patio covers and other top-supported structures
- Features 1-in. standoff to help prevent rot at post end
- Slotted for adjustability
- Designed for versatility, cost-effectiveness and maximum uplift performance
- Nominal post size: 4×4
-
Standard Shipping
$51.97
Features:
- Manual dispensing tool
- Features a steel carriage for ultimate durability and is engineered for continuous, high-volume use
- Double-gripping plates that help extend tool life
- For SET3G10 adhesive and other 10 oz. single-cartridge adhesives
-
Standard Shipping
$26.20
Features:
- Discontinued
- Designed for nail- or bolt-on applications
- For use in vertical or horizontal applications
- 5/16 in. seat thickness
- Length: 19-3/4 in.
- Made from 12-gauge steel
-
Standard Shipping
$28.56
Features:
- Attaches a post to existing concrete for decks, patio covers and other top-supported structures
- Features 1-in. standoff to help prevent rot at post end
- Slotted for adjustability
- Designed for versatility, cost-effectiveness and maximum uplift performance
- Nominal post size: 6×6
-
Standard Shipping
$6.68
Features:
- One-piece, wrap-around clip ensures uniform holding capacity
- Threaded end is chamfered for ease of starting nut
- Diameter: 5/8 in.
- Length: 8-1/2 in.
- Made from mechanically galvanized carbon steel
-
Standard Shipping
$52.89
This item has been DISCONTINUED.
-
Standard Shipping
$1.29
Features:
- A versatile and easy-to-use mending plate for wood-to-wood connections
- These non-structural connectors are ideal for general fix-up work
- Installs without nails; align wood with arrows at joint and hammer plate to embed prongs
- Used for non-structural applications only (not for truss applications)
- Width: 3 in.
-
Standard Shipping
$9.51
Features:
- One-piece, wrap-around clip ensures uniform holding capacity
- Threaded end is chamfered for ease of starting nut
- Diameter: 5/8 in.
- Length: 10 in.
- Made from mechanically galvanized carbon steel
-
Standard Shipping
$1.72
Features:
- An indented embedment line ensures accurate embedment depth
- Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
- Load rated for wind and seismic forces
- 8-in. exposed length
- Embed 4 in. into a poured concrete bond beam or grouted block wall
-
Standard Shipping
$5.54
Features:
- Qualified for static and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
- Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
- Hex-washer head requires no separate washer and provides a clean installed appearance
-
Standard Shipping
$2.83
Features:
- Helps resist tension forces
- Staggered nail pattern reduces the potential for splitting
- Width: 1-1/4 in.
- Length: 21-5/8 in.
- Made from 16-gauge steel