Showing all 37 resultsSorted by popularity
-
$46.29 Features
- APVB66R is designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APVBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-
$44.69 Features
- Easy installation
- Decorative and functional
- Durable coating
- SDWS22512DBB-R50 offers strong structural hold
-
$6.69 Features
- SD10112DBBR50 is designed for Outdoor Accents Connectors
- Easy installation
- No-pre-drilling required
- Optimized strength
- Decorative & durable finish
-
$26.19 Features
- Use the SDWS22312DBB-R50 Outdoor Accents structural screw without the washer as a wood-to-wood fastener
- Deep 6-lobe T40 recess provides easy, secure driving (T40 drive bit included in multi-count packages)
- Patented SawTooth point (3 1/2″ and 5 1/2″ screws only) ensures fast starts, reduces installation torque and eliminates the need for predrilling in most applications; Type-17 point on 2″ screw ensures fast starts
-
$84.56 Features:
- Type-17 point enables easy driving with no predrilling and minimal wood splitting
- 3/8-in. hex head with 0.48-in. integrated washer
- Head is stamped with the Simpson Strong-Tie — sign and fastener length for easy identification after installation
- Serrated threads
- Replacement driver bit model BITHEXR38-134 (not included)
-
$18.89 Features
- SDWS25200DBB-R50 is code listed in IAPMO-UES ER-192 for verified strength and reliability
- Decorative Bolt-Like Look
- Superior Holding Power
- Corrosion Resistant
-
$11.99 Features
- SD9112R100 is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
$14.29 Features
- Use with Outdoor Accents decorative hardware and STN22 hex-head washer for an appealing look
- Use Outdoor Accents structural screw without the washer as a wood-to-wood fastener
- SDWS22512DBBRC12 features a deep 6-lobe T40 recess provides easy, secure driving (T40 drive bit included in multi-count packages)
-
$75.99 Features
- SD9212R500 is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
$16.99 Features
- SD9212R100-R is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
$269.99 Features
- SD9212MB is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
$53.99 Features
- SD9112R500 is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
$293.99 Features
- SD9112MB is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
$85.99 Features
- SD10212R500 is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
$18.99 Features
- SD10212R100-R is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
$314.99 Features
- SD10212MB is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
$61.99 Features
- SD10112R500 is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
$13.99 Features
- SD10112R100 is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
$333.99 Features
- SD10112MB is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
- 14% OFF
$73.99 Original price was: $73.99.$63.99Current price is: $63.99. Features
- HCKDSVT2S meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- Meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- T25 6-lobe driver bit: BITTX25
- High-low threads with Type-17 point provides fast starts
- 34% OFF
$84.99 Original price was: $84.99.$55.99Current price is: $55.99. Features
- HCKDSVT212S meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- Meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- T25 6-lobe driver bit: BITTX25
- High-low threads with Type-17 point provides fast starts
- 14% OFF
$84.99 Original price was: $84.99.$72.99Current price is: $72.99. Features
- HCKDSVT158S meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- Meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- T25 6-lobe driver bit: BITTX25
- High-low threads with Type-17 point provides fast starts
- 14% OFF
$148.99 Original price was: $148.99.$127.99Current price is: $127.99. Features
- DSVT2S meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- Meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- T25 6-lobe driver bit: BITTX25
- High-low threads with Type-17 point provides fast starts
- 14% OFF
$128.99 Original price was: $128.99.$110.99Current price is: $110.99. Features
- DSVT212S meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- Meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- T25 6-lobe driver bit: BITTX25
- High-low threads with Type-17 point provides fast starts
- 14% OFF
$166.99 Original price was: $166.99.$142.99Current price is: $142.99. Features
- DSVT158S meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- Meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- T25 6-lobe driver bit: BITTX25
- High-low threads with Type-17 point provides fast starts
- 14% OFF
$148.99 Original price was: $148.99.$127.99Current price is: $127.99. Features
- DSVR2S meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- Meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- T25 6-lobe driver bit: BITTX25
- High-low threads with Type-17 point provides fast starts
- 14% OFF
$128.99 Original price was: $128.99.$110.99Current price is: $110.99. Features
- DSVR212S meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- Meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- T25 6-lobe driver bit: BITTX25
- High-low threads with Type-17 point provides fast starts
- 14% OFF
$166.99 Original price was: $166.99.$142.99Current price is: $142.99. Features
- DSVR158S meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- Meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- T25 6-lobe driver bit: BITTX25
- High-low threads with Type-17 point provides fast starts
- 14% OFF
$128.99 Original price was: $128.99.$110.99Current price is: $110.99. Features
- DSVG212S meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- Meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- T25 6-lobe driver bit: BITTX25
- High-low threads with Type-17 point provides fast starts
-
$98.99 Features
- Type 17 point to reduce pre-drilling while engaging rapidly with the project material, helping to prevent splitting
- Countersinking bugle head prevents heads from popping out, leaves smooth finish
- Feature a proprietary polymer coating that protects the fastener against corrosive elements
- LP212STBK comes in a 25 lb bucket
-
$98.99 Features
- Rust and corrosion resistant
- T-25 and T-30 star drives
- Type 17 point, flat head, coarse thread
- LB3STBK comes in a 25 lb bucket
-
$103.99 Features
- Tapered, countersinking head compresses the surface of the material as it is driven
- Star drive head reduces bit spinout
- Star drive head reduces bit spinout
- LP114STBK comes in a 25 lb bucket
-
$4.09 Features
- Decorative and Strong
- Fast and Reliable
- Corrosion Resistance
- SDWS22312DBB-RN1 is listed in IAPMO-UES ER-192 for structural reliability
-
$4.59 Features
- SDWS22512DBB-RN1 does not require predrilling
- Superior holding power
- Corrosion-resistant finish
-
$7.59 Features
- SDWS25200DBBRC12 offers a fast & easy installation
- Strong holding power
- Secure driving
- Durable coating
-
$10.59 Features
- SDWS22312DBBRC12 offers a strong & durable construction for reliability
- Decorative and Functional
- Corrosion Resistance
- Code Listed
-
$296.41 Features:
- Flat head
- SSDWP3S305 has a unique box thread design with raised-ridge technology greatly reduces driving torque
- Specially designed sharp point penetrates hard wood products with ease
- 6-lobe drive helps prevent driver-bit cam-out while driving easier and extending bit life (replacement bit BITTX25)
- Length: 3 in.
