Showing 1–40 of 330 resultsSorted by popularity
-
14% OFF

$12.90 Original price was: $12.90.$11.05Current price is: $11.05.
Features
- Every other tooth is ground thinner for fast cuts
- Thicker plate design for improved tracking
- Reinforced shoulder for durability and impact resistance
- Body slots dissipate heat for long blade life

Minimum order quantity: 10
Order in multiples of: 10
-


Features
- 50% taller (13mm) segments are designed for longer life and faster cutting
- Up to 4x longer life than competitive blades
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- Up to 30% smoother cutting than segmented blades
- Carefully tensioned for less vibration and a superior user experience
- Strict quality control measures ensure superior performance
- Dry or wet cutting for added versatility
-

$10.99
Features:
- Aluminum oxide grain
- Designed for all ferrous metals
- A free cutting wheel with exceptional cut rate and very good life
- Triple-reinforced for stability and safety
-

$2.09
Features
- More Cuts. Fewer Wheels.TM
- 50% Longer Life, Replace less often with Temper Point grains that are tougher and razor sharp. Better adhesion between the coated grains and resin creates a longer lasting cutting edge that wears
- Extremely Versatile: Efficiently cut a wide range of metals including carbon steel, stainless and nickel-based alloys.
- Aggressive Cutting Action: Make fast cuts with a thin wheel design and high-grain concentration.
- Durable By DesignTM: Built with two sheets of fiberglass for wheel strength. Designed to reduce wheel breakage.
-


$175.13
Features
- REPLACES JPL91440A 4.0AH BATTERY
- 14.4 Volts 5 Amp Hour capacity
- Works with RB217, RB218, RB397, RB398, RB441T, RB517, RB518, RB441T, RB611T, RB401T-E, and PJID143 tool models.
- Fully charged in 40 minutes or less.
- Built in charge indicator gauge on battery casing.
- Compatible with Max JC914, JC925 and JC928 chargers.
-

$5.99
Features:
- New advanced aluminum oxide grain blend with more cutting points per unit area increasing cutting speed by 50 percent
- Up to twice the life and aggressive feel with a new active tough bond technology
- Versatile choice for cutting rebar, structural steel, pipe and sheet metal including hard and soft carbon steel and 400 series stainless
- First to market universal arbor allows a single blade to be run on saws with a 1 in. or 20mm arbor
Minimum order quantity: 10
Order in multiples of: 10
-

$319.00
Features:
- Norton Clipper features premium iHD technology allows better cutting and consistency, increasing blade life
- Anti-crack ellipsoidal gullets resists cracking of steel core under extreme conditions
- Stroboscopic indicators eliminate overcutting and allow faster cooling of blade
- Segment wear indicators show remaining blade life
-


$214.43
- JE400 Extension Arm is designed for adjustable height tying
- Compatible with RB441T, RB443T, RB611T, RB398S, RB518, RB218, RB655
-

$11.59
Features:
- Market leading cutting speed now with an advanced aluminum oxide blend adds more cutting points per unit area
- Up to twice the life and aggressive feel with a new active tough bond technology
- Three layers of reinforcement for heavy duty tough applications and high power machines
- Available in a versatile universal arbor for 1 in and 20 mm arbor machines and in a 20 mm fixed arbor option
-

$33.50
Features:
- Faster cuts with less vibration in nail-embedded wood
- High performance carbide for greater durability and cutting performance
- Enhanced carbide tip to blade connection for extreme impact resistance
- Unique plunge tip design that enables faster and easier plunging
- 1 in. oversized blade body for straighter cuts with less vibration

-


$11.60
Features
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- Dry or wet cutting for added versatility
- Carefully tensioned for less vibration and a superior user experience
- Made with high quality diamonds
- 50% taller (13mm) segments are designed for longer life and faster cutting
- Strict quality control measures ensure superior performance
- For smoother and finer cuts in masonry products
-

$7.31
Features:
- High performance carbide for greater durability and cutting performance in metals with a thickness from 3/16″ to 9/16″
- Enhanced carbide tip to blade connection for extreme impact resistance
- 1 in. oversized blade body for straighter cuts with less vibration
-

$247.67
Max USA Battery Charger The JC925 (JC925A) is a charger for select rebar tying tool and rebar cutter/bender batteries from Max USA. This charger delivers a full charge in 65 minutes achieving 80% in just 50 minutes regardless of AH rating. Charges OEM lithium ion (Li-on) batteries for the following Max tools: RB218 RB398 RB518…
-


$14.20
Features
- 50% taller (13mm) segments are designed for longer life and faster cutting
- Up to 4x longer life than competitive blades
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- Up to 30% smoother cutting than segmented blades
- Carefully tensioned for less vibration and a superior user experience
- Made with high quality diamonds
- Dry or wet cutting for added versatility
-


$699.99
Features
- Dewalt DCS578X2 features Up to 47% more power vs the DCS575**
- Uses a 7-1/4 in. circular saw blade and features a maximum cut depth of 2-9/16 in. at a 90° bevel.
- Maximum bevel capacity of 57° with bevel stops at 22.5° and 45°
- Electric brake stops the blade after the trigger is released
- Integrated LED for increased visibility and cut accuracy
- Integrated rafter hook for quick and easy storage
-

$24.99
Features:
- High performance carbide for greater durability and cutting performance in metals with a thickness from 3/16″ to 9/16″
- Enhanced carbide tip to blade connection for extreme impact resistance
- 1 in. oversized blade body for straighter cuts with less vibration

-

$110.99
Features:
- Has a .472 inch impregnated diamond segment for longer life, smoother finish and faster cutting
- Alternating turbo segment for cut speed, and plain segment for life
- Ventilated steel center with cooling holes to reduce heat when cutting
- Laser cut dual arbor for consistent fit on high-speed, masonry, and walk-behind saws
-


$10.99
Features:
- 10 PACK – 10 Blades per unit
- Up to 70% faster cutting compared to standard blades
- High grade Tungsten carbide tips for durability
- Blade coating provides reduced pitch build-up
- Reduced swing width
- Top bevel angle with 23° tip for a smoother cut
-
19% OFF


$2,091.99 Original price was: $2,091.99.$1,699.00Current price is: $1,699.00.
-

$51.99
Features
- Remote-Control Adjustments – Help maximize jobsite efficiency by making precise horizontal or vertical line adjustments with a remote control range up to 330 ft. (100m)
- Sleep Mode – Help optimize battery performance with its sleep mode that automatically activates after 60 seconds of non-use
- Jobsite Ready – Power your Remote Control with the included (2) AA batteries
-


$55.99
Features
- Includes 8 most common size sockets & 2-1/4″ adapters
-

$9.64
Features:
- High performance carbide for greater durability and cutting performance in thin metal
- Solid carbide creates full barrier to heat resistance for maximum durability
- Carbide strip teeth are milled to perfection for smoother quality cuts

-


$223.99
Features
- Up to 2X less weight than heavier hoses
- Highly flexible and less kinks for easy rolling
- More durable than vinyl hoses
- Includes fittings
- For high pressure compressors and nailers
-

$5.17
Features:
- Hardened cutting edge for long and durable cutting life
- Deep-seated gullets for easy chip removal and fast cutting
- Bi-Directional tooth design for fast and smooth cutting in both directions

Minimum order quantity: 5
Order in multiples of: 5
-
6% OFF


$146.99 Original price was: $146.99.$138.17Current price is: $138.17.
Features
- Promote productivity with this attachment that delivers 6X faster clamps without the hassle of a hand tool
- Limit fatigue with this PEX pincher that requires less work to finish the job
- Attach in seconds to go from driving screws to clamping pipe
- Works with select DEWALT 20V MAX* and other pro-grade 18V impact drivers
DWAPXPIR Instruction Manual
-


$45.79
Features
- Taller 13mm segments are designed for longer life and faster cutting
- Up to 4x longer life than competitive blades
- For cutting concrete, block, brick, pavers, and roof tiles
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting diamond blade
- Made with high quality diamonds
- For smoother and finer cuts in masonry products
- For use with angle grinders or masonry saws
-

$116.10
Features
- Tough, excellent strength of maximum working pressure 500 PSI
- Rubber/PVC blend construction
- Very flexible even in sub-zero temperatures
- 100-Feet x 3/8-Inch
- Solid brass connectors never corrode and give a better seal
- Abrasion-resistant outer cover
-

$39.99
Features
- Rock carbide tip for longer bit life
- Elongated four flute helix for faster material removal
- Increased steel prevents breakage
- For use with electric or cordless rotary hammers
-

$216.39
Features
- XR Lithium Ion pack provides up to 60% more capacity than standard 20V MAX* battery pack (DCB200)
- 3-LED Fuel Gauge allows immediate feedback on state of charge
- Lightweight at 1.4 lbs. and compatible with entire line of 20V MAX* tools
- 5.0AH capacity for Long Runtime
-
4% OFF

$152.50 Original price was: $152.50.$146.40Current price is: $146.40.
Features
- Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
- Provides up to 65% more run time per charge compared to BL1830
- Reaches full charge in 45 minutes or less
- Compatible only with STAR Protection tools, indicated by the Star symbol™ and/or yellow battery receiver under the tool
-


$387.99
Features
- 180 Watt Hours of energy in each battery pack (360 Watt Hours combined)
- 6X the runtime compared to DCB201 1.5Ah Battery
- 9.0 Ah capacity when used in a 20V MAX* tool
- Compatible with 20V MAX*, 60V MAX* and 120V MAX* tools
- LED State of Charge Display
-


$44.99
Features
- Wand provides extension from from 22″ to 36″ for hard to reach areas
- Easily extends by pressing quick release button for added user convenience
- Durable design made of aluminum material
- Secure attachment to bent pipe with easy lock button
-


$245.72
Features
- 4 Amp Hour (80 Watt hour) capacity provides extended runtime
- Same size & weight as DCB230 20V MAX* compact 3Ah battery
- Lighter weight with same capacity as DCB204 4Ah battery
- compatible with 20V MAX* tools and chargers
- Includes fuel gauge 3-LED charge indicator
-


$347.99
Features
- Simultaneous Charger: All Ports Charge At The Same Time
- Charges 12V MAX*, 20V MAX*, and FLEXVOLT® 20V/60V MAX* Batteries
- 8 Amps Output Per Port (simultaneously)
- Charges (4) DCB204 battery in 40 mins
- Side Brackets To Mount Onto The ToughSystem™ Rails
-

$22.00
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-


$55.35
Features
- Quality diamond blade with economical cutting value
- Sintered blade segment
- Diamond depth of .440” (11mm)
- Segment height of .540” (14mm)
-

Features:
- High performance carbide for greater durability and cutting performance in metals with a thickness from 3/16″ to 9/16″
- Enhanced carbide tip to blade connection for extreme impact resistance
- 1 inch oversized blade body for straighter cuts with less vibration

-


$45.99
Features
- QDDECKCLIP-RC fits all Quik Drive attachments with removable noseclips (PRO250, PRO300S, PRO200).
- Efficient Alignment
- Secure Fastening
- Time-Saving
Quik Drive Resources
-


$113.99
Features
- DWACPRIR offers 4x Faster Cuts
- Minimize Cutting Effort
- Quick-Change Brace
- Multi-Brand Compatibility
- Full-Range Cut Capacity
-
14% OFF


$177.99 Original price was: $177.99.$153.07Current price is: $153.07.
Features
- QDPRO300SG2 is available as a bare tool or set
- Non-skid teeth are reversible and replaceable
- Uniform toenailing and countersink on slick surfaces
Quik Drive Resources