Showing 1–40 of 88 results
-


Standard Shipping
$139.99
Features
- Complete a wide variety of applications with up to 1,500 in-lbs of torque
- Bright LED with 20 second trigger delay for working in dark or confined spaces
- Variable speed trigger allows for control and precision on delicate work surfaces
- Easily change bits with quick release hex chuck
-

Free Shipping
$240.00
Features
- Powerful 7 amp motor
- Torque limiting clutch engineered to prevent gear damage
- Variable speed trigger
- 40 bit angle settings
- One-touch sliding chuck for quick bit changes
-

Free Shipping
$775.00
Features:
- Air Actuated Counterbalance System
- Vibration Absorbing Housing
- Powerful 11 Amp Motor Delivers 8.4ft/lbs of impact energy
- Variable Speed Dial
- Soft Start and Soft No Load functions
-

Oversized Shipping
$2,437.50
Features
- 15 AMP breaker hammer motor which delivers 53.9 ft.lbs./72.8 joules of impact energy
- Advanced AVT® Vibration Reduction Technology
- L.E.D. service light notifies the user approximately 8 hours before brushes need to be replaced

-

Free Shipping
$912.50
Features
- 14A Motor Delivers 12.7ft/lbs of Impact Energy
- Internal Counterbalance Antivibration Technology
- Variable Speed Control Dial
- Constant Speed Control
- LED Indicator Alerts Users To Maintenance Needs

-


Special Order Shipping
$282.58
Features
- Mix up to 19 premixed drywall buckets (4.5 gal) on a single charge using DCB606 Flexvolt battery (6Ah).
- Mix up to 17 buckets of tile mortar (5 gal) on a single charge using DCB606 Flexvolt battery (6Ah)
- Mix up to 9 buckets of concrete (4.5 gal) on a single charge using DCB606 Flexvolt battery (6Ah)
- Integrated E-Clutch® System helps to improve user control.
- 3-Position side handle allows for optimum position while mixing.
-


Free Shipping
$299.99
Features:
- Multi-volt power – cord or 36V battery
- 1,220 in-lbs of torque and up to 2,100 RPM with 0-31,500 beats per minute
- 36V Battery Backwards Compatible with Hitachi or Metabo HPT 18V tools
- Metal Keyless 1/2 Inch Chuck With Carbide Insets
- Variable Speed Trigger
-

Free Shipping
$1,212.50
Features:
- Powerful 14 Amp Motor
- AVT Counterbalance System for Reduced Vibration
- Automatic brush cutout system for longer tool life
- Variable speed adjustable dial control

-


Special Order Shipping
$1,327.06
Features
- 19.4 Joules of impact energy for fast drilling and chipping, even in the hardest concrete.
- Anti-Rotation E-CLUTCH System shuts down the tool in bind up situations.
- Constant speed electronics allows the tool to maintain speed under load
- The SHOCKS Active Vibration Control System reduces vibration felt by the user at the handles, compared to rotary hammers without this feature.
- The heavy weight design makes it ideally suited for horizontal and downward drilling for #9 – #14 rebar dowel applications and dry coring up to 6 in.
-


Standard Shipping
$186.25
Features
- Makita GFD02Z-built brushless motor delivers 585 in.lbs. of Max Torque
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- XPT is engineered to provide increased dust and water resistance in harsh job site conditions
- 2 speed settings (0-550 & 0-2,200 RPM)
- Compact length at only 6-11/16″; ideal for working in tight spaces
-


Out of stock product
$503.71
Features
- Mix up to 19 premixed drywall buckets (5 gal.) on a single charge using the DCB606 DEWALT FLEXVOLT® battery (6Ah)**
- Mix up to 17 buckets of tile mortar (5 gal.) on a single charge using THE DCB606 FLEXVOLT battery (6.0Ah)**
- Mix up to 9 buckets of concrete (4.5 gal.) on a single charge using THE DCB606 FLEXVOLT battery (6.0Ah)**
- 3-Position side handle allows for optimum position while mixing
- Integrated E-Clutch System helps to improve user control
-


Free Shipping
$865.00
Features
- Makita-built brushless motor along with two 40V max XGT® batteries combine to deliver up to 15% faster breaking efficiency than corded equivalent model*
- Constant speed control automatically applies additional power under load for optimum performance
- Extreme Protection Technology (XPTâ„¢) is engineered for improved dust and water resistance for operation in harsh conditions
- Anti-Vibration Technology (AVT®) is an internal counterbalance system along with vibration-absorbing handles that work together to reduce vibration
- Auto-start Wireless System (AWS®) utilizes Bluetooth® technology for wireless power-on/off communication between tool and dust extractor (AWS® Transmitter sold separately)
-


Standard Shipping
$176.25
Features
- Makita XPH14Z features a built BLâ„¢ Brushless Motor that delivers 1,250 in.lbs. of Max Torque
- Compact and ergonomic design at only 7″ long; 14% shorter than previous model
- 2-speed transmission (0-550 & 0-2,100 RPM) for a wide range of drilling, fastening and hammer drilling applications
- 0-31,500 BPM for faster hammer drilling in masonry materials
- All metal 1/2″ self ratcheting chuck for improved bit gripping strength and durability
- Weighs only 6.0 lbs. with battery (battery not included) for reduced operator fatigue
- L.E.D. lights illuminate the work area
- Rubberized soft grip provides increased operator comfort
- Efficient BLâ„¢ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The electronically-controlled BLâ„¢ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
-


Free Shipping
$299.00
Features
- Fastening torque of 700 ft. lbs. and breakaway torque of 1,200 ft. lbs.
- Can handle a 6 ft. to 8 ft. drop
- Anvil resistant to shearing and breakage
- Increased visibility with LED
- Additional control for different applications with speed settings
- Up To 2400 Impacts Per Minute
-

Free Shipping
$1,076.25
Features
- 36V Dual power rotary hammer from 2 18V LXT batteries
- Anti-Vibration Technology for smoother operation
- Dust extraction capability with optional Makita Dust Attachment Kit
- Auto-start Wireless System for bluetooth remote start dust extraction
-
New Product


$449.00
Features
- Dewalt DCF900P2 features a Battery Guard
- On tool LED light
- 030 ft-lbs of max fastening torque and 1400 ft-lbs of max breakaway torque.
- 4-mode speed settings and variable speed trigger.
- Precession Wrench Control
-


Free Shipping
$222.21
Features
- The Dewalt DCF850E1 includes a Compact impact driver, under 4 in. design for optimized ergonomics and access to difficult-to-reach spots
- Delivers 1,825 in-lbs of torque and 3,250 RPM to drive large diameter screws
- Enabled by variable 3-speed trigger
- Integrated 3-LED work light enhances visibility in dimly lit spaces
-


Free Shipping
$422.82
Features
- The Dewalt DCK265D2 has a Brushless motor for efficient performance and runtime
- Wide variable speed range with dedicated High and Low settings helps optimize usage in light- and heavy-gauge substrates
- Four dedicated tool modes enable operation of tool in Trigger Mode (High Speed), Trigger Mode (Low Speed), PushStart Mode, and Lock-On Mode
- Top-mounted electronic mode select enables fast, one-handed switching between the tool’s four modes
- Tool-free bit change enables fast bit changes without the need for a wrench
-


Free Shipping
$285.81
Features
- The Dewalt DCK279C2 includes the DCD709 hammer drill/driver, compact at only 6.9 in. front to back designed to fit in tight spaces
- DCD709 hammer drill/driver is lightweight at only 2.5 lbs.
- DCF809 Impact Driver is only 5.1 in. in length to fit in tight spaces.
- DCF809 Impact Driver has 1700 in-lbs of torque delivering the power you need to get a majority of applications done
- DCF809 Impact Driver is lightweight at only 2.1 lbs.
-


Free Shipping
$232.68
Features
- Complete challenging projects with up to 40% more with the Dewalt DCD800P1 vs. the DCD791B using DCB205 battery (sold separately)
- Access hard to reach work areas: Compact 6.37 in. size is 1/2 in. shorter in length compared to the DCD791, tool head only.
- High bit retention with 1/2 in. metal ratcheting chuck
- Pro-level speed, control and precession: High-speed transmission with variable trigger and 2 speed settings (0-650/0-2,000 rpm)
- Brighten dark work areas: Adjustable 3-Position, 3 Mode LED with up to 70 Lumens, including LED spotlight mode which features a 20-minute shutoff function for extended work time in low-light spaces
-


Standard Shipping
$155.07
Features
- The Dewalt DCD793D1 is over 2in. shorter in length at 6.38 in. (tool head length only) to tackle tough jobs.
- Get up to 16% more power with 404 UWO and up to 1,650 RPMs no load for a variety of drilling applications.
- High bit retention with 1/2 in. ratcheting chuck
- Illuminate workspaces using the on-tool LED work light
-


Free Shipping
$395.00
Features
- Variable 2-speed design (0-550 & 0-1,800 RPM) (0-8,250 & 0-27,000 BPM) covers a wide range of drilling, driving and hammer applications
- Makita-built brushless motor delivers 970 in.lbs. of Max Torque for up to 70% more power*
- Efficient brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The brushless motor eliminates carbon brushes, enabling the brushless motor to run cooler and more efficiently for longer life
- The electronically-controlled brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
-


Free Shipping
$287.50
Features
- Driver-Drill weighs only 3.1 lbs. with battery for reduced operator fatigue
- Compact and ergonomic design at only 6-1/2″ long
- Mechanical variable 2-speed transmission (0-500 & 0-1,700 RPM) (0-7,500 & 0-25,500 BPM) for a wide range of drilling, fastening and hammer drilling applications
- Makita-built Brushless Motor delivers 350 in.lbs. of Peak Torque
- Engineered with a metal jampot design for increased durability
-


Free Shipping
$611.25
Features
- Makita-built motor delivers 810 ft.lbs. of Nut-Busting Torque and 560 ft.lbs. of Fastening Torque
- 3 forward and 3 reverse Auto-Stop modes for increased efficiency
- XPTâ„¢ is engineered to provide increased dust and water resistance in harsh job site conditions
- 4-speed power selection switch (0-600 / 0-1,200 / 0-1,900 / 0-2,300 RPM & 0-1,200 / 0-1,900 / 0-2,700 / 0-2,900 IPM) for a wide range of applications
- Full speed mode function reduces trigger pull to reach full speed
-


Free Shipping
$887.50
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power and performance required for heavy-load applications
- Constant speed control automatically applies additional power under load for optimum performance
- Overload protection is designed to protect the motor from burnout in abnormally high torque situations
- XGT® technology delivers up to 135 of 3/8″ holes using a fully charged 40V XGT® 4.0Ah battery*
- Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of bit is suddenly forced to stop
-


Free Shipping
$956.25
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power performance required for heavy-load application
- Constant speed control automatically applies additional power under load for optimum performance
- Overload protection is designed to protect the motor from burnout in abnormally high torque situations
- XGT® technology delivers up to 135 of 3/8″ holes per charge using full charged 40V XGT® 4.0Ah battery*
- Quick change chuck allows for interchangeability from SDS-PLUS to 1/2″ keyless chuck for utilization of straight shank bits
-


Special Order Shipping
$882.33
Features
- 6.1 Joules of impact energy for fast drilling and chipping, even in the hardest concrete.
- Anti-Rotation E-CLUTCH ® System shuts down the tool in bind up situations.
- Constant speed electronics allows the tool to maintain speed under load.
- System reduces vibration felt by the user at the handles, compared to rotary hammers without thsis feature.
- The light weight design makes it ideally suited for horizontal drilling for #3 – #6 rebar dowel applications and dry coring up to 3 in.
-


Special Order Shipping
$902.06
Features
- FAST DRILLING IN CONCRETE with 4.5 J of impact energy
- System reduces vibration felt by the user at the handles comparted to rotary hammers without this feature
- System shuts down the tool in bind up situations
- when paired with DWH200D shroud and DCV585 dust extractor
- to quickly switch between drilling, hammer drilling, and chipping applications
-


Special Order Shipping
$1,220.81
Features
- RAPID DRILLING AND CHIPPING in hard concrete with 13.3 J of impact energy
- MAINTAIN SPEED UNDER HEAVY LOADS with constant speed electronics
- EFFICIENT PERFORMANCE AND RUNTIME with brushless motor and German-engineered mechanism
- PRO-GRADE VERSATILITY: Tackle horizontal and downward drilling for #6 – #9 rebar dowel applications, dry coring up to 5 in., chipping in any lower-to-mid wall, bushing, and ground rod driving
- REDUCED VIBRATION FOR COMFORTABLE GRIP with SHOCKS™ Active Vibration Control®
-
Best Seller


Free Shipping
$1,327.06 $1,179.00
Features
- RAPID DRILLING AND CHIPPING in hard concrete with 19.4 J of impact energy
- MAINTAIN SPEED UNDER HEAVY LOADS with constant speed electronics
- EFFICIENT PERFORMANCE AND RUNTIME with brushless motor and German-engineered apparatus
- PRO-GRADE VERSATILITY: Tackle horizontal and downward drilling for #9 – #14 rebar dowel applications, dry coring up to 6 in., chipping in any lower wall and floor, bushing, and ground rod driving
- REDUCED VIBRATION FOR COMFORTABLE GRIP with SHOCKSâ„¢ Active Vibration Control
-


Standard Shipping
$773.75
Features
- Makita built brushless motor with two speed, variable speed (0-400 RPM and 0-1,500 RPM) for maximum efficiency and a wide range of drilling applications
- Drills up to 6-1/4″ holes with hole saws and 4-5/8″ holes with self feed bits
- Weighs only 11.9 lbs. with battery and ergonomic design for operator comfort
- Torque limiter; built-in clutch reduces gear damage by disengaging gears if the bit binds
- Built-in L.E.D light with pre-glow and afterglow illuminates the work area
-


Special Order Shipping
$500.91
Features
- Fast Drilling in Concrete With 2.1 joules of impact energy
- OSHA Table 1 Compliant when paired with DWH303DH on-board extractor
- Shocks Active Vibration Control System reduces vibration felt by the user at the handles, compared to rotary hammers without this feature
- mechanism and brushless motor for efficient performance and runtime.
- Lightweight Design makes this tool ideal for rod hanging, seismic & safety attachments, cable tray & strut mounting, clamp mounting, and rail mounting.
-


Free Shipping
$436.25
Features
- Makita-built brushless motor delivers 1,860 in.lbs. of Max Torque
- Digitally controlled mode, Tightening Mode (T-mode) for faster tightening of self-drilling screws; helps prevent damage to the screw or workpiece
- XPTâ„¢ is engineered to provide increased dust and water resistance in harsh job site conditions
- 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM & 0-1,400/ 0-2,600/ 0-3,600/ 0-4,100 IPM)
- Compact length at only 4-3/4″; ideal for working in tight spaces
-


Free Shipping
$425.00
Features
- Makita-built brushless motor delivers 585 in.lbs. of Max Torque
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- XPTâ„¢ is engineered to provide increased dust and water resistance in harsh job site conditions
- The Makita GFD02D offers two speed settings (0-550 & 0-2,200 RPM)
- Compact length at only 6-11/16″; ideal for working in tight spaces
-


Special Order Shipping
$400.50
Features
- Dewalt DCF620CM2 features a slim nose and removable shoe which allows for easy access into tight corners.
- Screw gun lock-on feature enables fast installation of collated drywall screws
- Full 360° rotation on screw gun allows users to choose best positioning for application
- Tool-free screw length adjustment with detent marks allow for easy and clear setup for varying screw lengths
- Tool-free fine-depth adjustment allows for consistent screw installation at varying depths