Showing 1–40 of 69 results
-
Standard Shipping
$4.07
Features:
- An indented embedment line ensures accurate embedment depth
- Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
- Load rated for wind and seismic forces
- 20-in. exposed length
- Embed 4 in. into a poured concrete bond beam or grouted block wall
-
Standard Shipping
$0.52
Features:
- Embossments in bend line strengthen connection
- The top flange features an arrow line indicator to aid correct installation
- Made from 18-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
Standard Shipping
$64.55
Features:
- Uses Strong-Drive screws, which allow for fast installation, reduced reveal and high capacity
- Provides a 1-in. standoff between post and concrete that meets code requirements
- Embeds in wet concrete at time of pour
- The standoff base reduces the potential for decay at post and column ends
- Shipped with base plate assembled
-
Standard Shipping
$0.65
Features:
- Embossments in bend line strengthen connection
- The top flange features an arrow line indicator to aid correct installation
- Made from 18-gauge steel
- ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
-
Standard Shipping
$132.72
Features:
- Redesigned tip and thread pattern provides easy starts and up to 25% less torque while driving makes for up to 20% faster driving
- Less installation torque also means less wear on tools
- Deep 6-lobed recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs
- The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks
- WSV screws can be easily backed out, allowing for future access to floor cavities
-
Standard Shipping
$13.95
Features:
- Provides a positive connection for a post to a wood deck
- Stronger than angled nailing or screw fastening
- Reduces the chance of the post splitting and eliminates nailing into end grain
- Not recommended for non top-supported installations (such as fences or unbraced carports)
- Nominal post size: 4×6
-
Standard Shipping
$4.20
Features:
- A versatile, heavy-duty strap for a variety of connections and splices where extra strength is needed
- Straight lines and chamfered edges offer a better appearance
- Provides support in home repair and construction projects
- Easy nailing pattern for connecting the sides of 2x members
- Width: 1-3/8 in.
-
Standard Shipping
$13.41
Features:
- SUL = skewed left
- Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist
- These hangers cannot be modified but will accommodate a 40 degree to 50 degree skewed joist
- Available with the acute flange turned in to accommodate end-of-wall installation for solid sawn sizes only (SURC or SULC)
- Nominal joist size: 2×6 or 2×8
-
Free Shipping
$308.77
Features:
- Flat head
- Unique box thread design with raised-ridge technology greatly reduces driving torque
- Specially designed sharp point penetrates hard wood products with ease
- 6-lobe drive helps prevent driver-bit cam-out while driving easier and extending bit life (replacement bit BITTX25)
- Length: 3 in.
-
Standard Shipping
$32.01
Features:
- Ideal for retrofit or new construction projects
- Can be installed with cast-in-place or post-installed anchor bolts
- Four-ply formed steel provides increased tension capacity
- Anchor bolt washers not required
- 2-1/2 in. width x 16 in. length
-
Standard Shipping
$46.31
Features:
- Increased uplift resistance for wind or seismic loading
- Bolt hole locations meet code-required spacing for optimal capacity
- Nominal column size: 6×6
- Made from 7-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
Standard Shipping
$2.04
Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- Speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: 2×8 and 2×10
-
Standard Shipping
$17.17
Features:
- The minimum effective shank length must equal or exceed the sum of the thickness of the attached material and the minimum embedment depth
- Code listed per ICC-ES ESR-2138, Florida FL15730 and LA RR25469
- Compatible with Simpson Strong-Tie powder-actuated tool systems as well as other common tools
- .300-in. head diameter / .157-in. shank diameter
- 1-in. washer
-
Standard Shipping
$3.81
Features:
- Available with the bend reversed
- Straps do not need to be wrapped over the truss to achieve the allowable load
- Versatile with many lengths offered to fit the specific application
- Length: 24 in.
- Made from 14-gauge steel
-
Standard Shipping
$3.03
Features:
- LUC-series hangers are tested, load rated and code compliant
- The LUC series installs using several fastener selections with tested allowable loads
- Suitable for nominal 2×10 and 2×12 lumber
- Made from 18-gauge steel
- ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
-
Free Shipping
$189.99
Features:
- Redesigned tip and thread pattern provides easy starts and up to 25% less torque while driving makes for up to 20% faster driving
- Less installation torque also means less wear on tools
- Deep 6-lobed recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs
- The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks
- WSV screws can be easily backed out, allowing for future access to floor cavities
-
Standard Shipping
$1.35
Features:
- Load-rated, precut strap designed for quick installation and optimal performance
- Designed to resist wind and seismic forces
- Floor-to-floor clear span application
- Width: 1-1/4 in.
- Length: 18 in.
-
Standard Shipping
$77.26
Features:
- SDS screws are supplied with the holdowns to ensure proper fasteners are used
- No stud bolts to countersink at openings
- Height: 14 in.
- Made from 7-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
Standard Shipping
$1.55
Features:
- Holds the rafter or truss on both sides for high lateral load resistance
- Used for a variety of connections where one member crosses another
- Can be installed on inside or outside of wall, or both sides
- Can be installed with flanges facing either inward or outward
- Made from 18-gauge steel
-
Standard Shipping
$20.79
Features:
- The nailing pattern allows for nailing to the edges of double 2x’s
- Strap nail slots are countersunk to provide a lower nail head profile
- The slots below the embedment line enable increased front-to-back concrete bond and help to reduce spalling
- Standard strap length: 24-5/8 in.
- Made from 12-gauge steel
-
Standard Shipping
$2.29
Features:
- An indented embedment line ensures accurate embedment depth
- Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
- Load rated for wind and seismic forces
- 12-in. exposed length
- Embed 4 in. into a poured concrete bond beam or grouted block wall
-
Standard Shipping
$13.49
Features:
- Suitable for retrofit applications
- The embossments add stiffness in crucial areas for improved performance
- Simple to install and can be installed on the inside or outside of the wall
- Load rated to resist high-wind forces
- 2-ply
-
Standard Shipping
$53.96
Features:
- Attaches a post to existing concrete for decks, patio covers and other top-supported structures
- Features 1-in. standoff to help prevent rot at post end
- Slotted for adjustability
- Designed for versatility, cost-effectiveness and maximum uplift performance
- Nominal post size: 6×6
-
Standard Shipping
$2.41
Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- Speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: 2×10, 2×12, 2×14
-
Standard Shipping
$4.42
Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- Speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: Double 2×10 and Double 2×12
-
Standard Shipping
$30.43
Features:
- Provides a positive connection for a post to a wood deck
- Stronger than angled nailing or screw fastening
- Reduces the chance of the post splitting and eliminates nailing into end grain
- Not recommended for non top-supported installations (such as fences or unbraced carports)
- Nominal post size: 6x
-
Standard Shipping
$8.12
Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- Speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: Triple 2×8 and Triple 2×10
-
Standard Shipping
$13.88
Features:
- Features double-shear nailing which distributes the load through two points on each joist nail for greater strength
- Allows for the use of fewer nails, faster installation, and the use of standard nails for all connections
- Do not bend or remove tabs
- Nominal joist size: 4×8
- Made from 14-gauge steel
-
Standard Shipping
$0.74
Features:
- A versatile and easy-to-use mending plate for wood-to-wood connections
- These non-structural connectors are ideal for general fix-up work
- Installs without nails; align wood with arrows at joint and hammer plate to embed prongs
- Used for non-structural applications only (not for truss applications)
- Width: 2 in.
-
Standard Shipping
$53.96
Features:
- Extra optional triangle holes for additional load
- HUC-series hangers are tested, load rated and code compliant
- Install wood joists to wood, masonry and concrete
- Seat width: 4-11/16 in.
- Nominal joist size: Triple 2×10
-
Standard Shipping
$46.82
Features:
- Attaches a post to existing concrete for decks, patio covers and other top-supported structures
- Features 1-in. standoff to help prevent rot at post end
- Slotted for adjustability
- Designed for versatility, cost-effectiveness and maximum uplift performance
- Nominal post size: 4×6
-
Standard Shipping
$26.71
Features:
- The nailing pattern allows for nailing to the edges of double 2x’s
- Strap nail slots are countersunk to provide a lower nail head profile
- The slots below the embedment line enable increased front-to-back concrete bond and help to reduce spalling
- Standard strap length: 26-1/8 in.
- Made from 12-gauge steel
-
Free Shipping
$210.59
Features:
- Sized to fit nominal 2x lumber
- Packaged in lightweight cartons
- Length: 150 ft.
- Made from 16-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
Standard Shipping
$21.83
Features:
- Minimum concrete edge distance is 5 in.
- Minimum concrete block left-to-right edge distance is 20 in.
- Length: 51 in.
- For additional length, an MST strap can be attached using 1/2- bolts through existing holes
- Made from 12-gauge steel
-
Standard Shipping
$18.35
Features:
- Provides a positive connection for a post to a wood deck
- Stronger than angled nailing or screw fastening
- Reduces the chance of the post splitting and eliminates nailing into end grain
- Not recommended for non top-supported installations (such as fences or unbraced carports)
- Nominal post size: 6x
-
Standard Shipping
$29.10
Features:
- Extra optional triangle holes for additional load
- HUC-series hangers are tested, load rated and code compliant
- Install wood joists to wood, masonry and concrete
- Seat width: 3-1/8 in.
- Nominal joist Size: Double 2×10
-
Standard Shipping
$1.22
Features:
- Can be used to make a connection to either the top or bottom plate
- Embossment in the angle reinforces the plate
- Sill plate installation: fill all round holes
- Width: 1-3/8 in.
- Height: 6-11/16 in.
-
Free Shipping
$603.93
Features:
- Semi-automatic and fast cycling
- PT-27 is Compatible with Simpson Strong-Tie powder loads and pins
- Fastener length: 1/2? 2-1/2 in. (3 in. washered)
- Fastener type: .300 in. or 8 mm-headed fasteners or 1/4-in.-20 threaded studs
- Load caliber: 0.27 strip loads, brown through red (levels 2?5)
-
Standard Shipping
$20.24
Features:
- SUL = skewed left
- Can accommodate joists skewed 40 to 50 degrees
- Angled nail slots direct nails for proper installation
- Nominal joist size: 2×10 or 2×12
- Made from 16-gauge steel
-
Standard Shipping
$16.04
Features:
- The minimum effective shank length must equal or exceed the sum of the thickness of the attached material and the minimum embedment depth
- Code listed per ICC-ES ESR-2138, Florida FL15730 and LA RR25469
- Compatible with Simpson Strong-Tie powder-actuated tool systems as well as other common tools
- .300-in. head diameter / .157-in. shank diameter
- 1-in. washer
