Showing 1–40 of 771 results
-

Rated 5.00 out of 5
Quote Request - Shipping Calculated Later
$0.00
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- Spacing: 6 x 6
- W/D Designation: W2.9/W2.9
- Gauge: 6/6
- Weight: 42LBS
-


Free Shipping
$289.88
Features:
- Full Case Containing 30 Rolls of Tie Wire
- Buy from an authorized Max USA Master Distributor
- Annealed steel wire – diameter 1.0mm
- For use with MAX RB441T TwinTier, RB611T, and RB401T-E TwinTier
-

Standard Shipping
$0.52
Features:
- Embossments in bend line strengthen connection
- The top flange features an arrow line indicator to aid correct installation
- Made from 18-gauge steel
- Galvanized (G90) for extra corrosion resistance
-


Standard Shipping
$0.65
Features:
- Embossments in bend line strengthen connection
- The top flange features an arrow line indicator to aid correct installation
- Made from 18-gauge steel
- ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
-

Standard Shipping
$4.07
Features:
- An indented embedment line ensures accurate embedment depth
- Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
- Load rated for wind and seismic forces
- 20-in. exposed length
- Embed 4 in. into a poured concrete bond beam or grouted block wall
-


Standard Shipping
$0.94
Features:
- LU-series hangers are tested, load rated and code compliant
- The LU series installs using several fastener selections with tested allowable loads
- Precision-formed engineered for installation ease and design value
- Seat width: 1-9/16 in.
- Nominal joist size: 2×8, 2×10
-


Free Shipping
$370.85
Features:
- Wire steel is melted, annealed, and drawn in the U.S.A
- Steel mill certification available
- For use with MAX RB441T TwinTier and RB401T-E TwinTier
-


Standard Shipping
$18.00
Features
- AT3G10 offers excellent for use in cold weather conditions or applications where fast cure is required
- Recognized per ICC-ES AC308 for threaded rod and rebar anchoring, along with post-installed rebar development and splice length design provisions
- Conventional blow-brush-blow hole cleaning technique using a wire brush — no power brushing required
- Base material installation temperatures down to 0°F (-18°C)
- Use in grout-filled CMU construction
-

Quote Request - Shipping Calculated Later
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- 20′ sticks
- Available for fabrication
-

Standard Shipping
$3.35
APLH light hangers connect 2x joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents connector screw.
-

Standard Shipping
$1.13
Features:
- Anchors mudsill to concrete block, poured walls or slab foundations
- Nominal sill size: 2×4, 2×6, 2×8, 2×10, 2×12
- Made from 18-gauge steel
- ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
-


Standard Shipping
$29.10
Features:
- 10:1 two-component high-strength, acrylic-based anchoring adhesive
- Suitable for use under static and seismic loading conditions in cracked and uncracked concrete as well as masonry
- Easy hole-cleaning procedure ? no power-brushing required
- Suitable for use in dry or water-saturated concrete
- Low-odor formula dispenses easily at below-freezing temperatures without the need to warm cartridge
-

Standard Shipping
$38.59
Features
- Excellent for use in cold weather conditions or applications where fast cure is required.
- superior sustained load performance at elevated temperature.
- can be specified for dry and damp conditions when in-service temperatures range from -40°F (-40°C) to 180°F (82°C).
- Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to reduced and elevated temperatures and long-term sustained loads.
- Easy hole-cleaning procedure — no power-brushing required.
- Approved for installation with vacuum-drill bit system without further hole cleaning.
-


Free Shipping
$366.10
Features:
- Galvanized Wire Resists Rust and Corrosion
- Steel mill certification available
- 19 Guage Rebar Tie Wire
- For use with MAX RB441T TwinTier and RB401T-E TwinTier
-

Standard Shipping
$1.08
Features
- Cannot be modified
- Works for a wide range of applications
- Features speed prongs used to temporarily position and secure the connector for easier and faster installation
- LUS-series hangers are tested, load rated and code compliant
-

Standard Shipping
$5.19
Features
- The LRU26Z features an open design and ability to field-adjust the slope, ideal for both retrofit or new applications.
- May be sloped down from 0° (0:12 pitch) to 49° (14:12). For slopes greater than 45°, allowable downloads are 0.85 of table loads.
- May be sloped up from 0° to 45°.
- For added versatility, the fasteners on the face of the hanger are placed high, enabling the bottom of the rafter to hang below the ridge beam (see “Max. C1” dimension in Standard Installation table).
- Can be installed using nails or Strong-Drive SD Connector screws.
-

Standard Shipping
$24.95
APHH heavy hangers connect 4x and 6x beams to girders. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily to the joist with the Outdoor Accents® structural wood screw and hex-head washer, and to the header with the Strong-Drive® SDS…
-


Standard Shipping
$1.22
Features:
- Can be used to make a connection to either the top or bottom plate
- Embossment in the angle reinforces the plate
- Sill plate installation: fill all round holes
- Width: 1-3/8 in.
- Height: 6-11/16 in.
-

Standard Shipping
$9.28
Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design
- Stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
- Install with Outdoor Accents connector screws for decorative look and maximum strength (sold separately)
-


Standard Shipping
$102.77
- 1-1/2×0.145in Smooth Shank Concrete Pin
- Max Powerlite Fasteners
- Plywood To Concrete
- Fiber Cement Siding To Concrete
- Mechanically Galvanized Carbon Steel
-


Free Shipping
$279.64
Features
- 21 Gauge Steel Tie Wire
- Bare steel with no coating
- For use with MAX RB397, RB398, RB517 and RB518
-

Standard Shipping
$5.48
Features
- 14 gauge
- ZMAX galvanized with black powder coat
-

Standard Shipping
$5.29
Features
- The open design and ability to field-adjust the slope make the LRUZ ideal for both retrofit or new applications.
- May be sloped down from 0° (0:12 pitch) to 49° (14:12). For slopes greater than 45°, allowable downloads are 0.85 of table loads.
- May be sloped up from 0° to 45°.
- For added versatility, the fasteners on the face of the hanger are placed high, enabling the bottom of the rafter to hang below the ridge beam
- Can be installed using nails or Strong-Drive® SD Connector screws.
-

Standard Shipping
$10.02
Features
- Installs quickly and easily with our Outdoor Accents 3 1/2″ structural wood screw and Outdoor Accents hex-head washer (sold separately)
- Easily attaches knee braces to posts or beams
- Adds decorative flair to knee brace connections
-


FEATURES/BENEFITS
- Available in 10 mil and 15 mil thicknesses, in 200′ (61 m) long rolls.
- Helps reduce the penetration of moisture and water vapor through the slab into the structure.
- Helps reduce fungus, mildew, and mold.
- Helps reduce radon gas from entering a structure.
- Resistant to methane gas.
- Tough enough to withstand normal construction jobsite conditions and traffic … will not crack, puncture, snag, split, or tear easily.
- Installs quickly and easily over tamped grade … no gravel, fill, or sand needed.
- 12′ (15 mil) and 15′ (10 mil) wide rolls require fewer seams in application.
- PERMINATOR prevents uncontrolled moisture from entering the slab allowing the slab to maintain the maximum slab moisture emission rate and relative humidity level as allowed by flooring manufacturer’s specifications.
- 10 or 15 mil thickness clearly marked on membrane for easy visual identification on jobsite.
- VOC content is 0 g/L.
- Made in America.

-

Standard Shipping
$38.98
Features
- APVB66R is designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APVBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-


Standard Shipping
$3.81
Features:
- Available with the bend reversed
- Straps do not need to be wrapped over the truss to achieve the allowable load
- Versatile with many lengths offered to fit the specific application
- Length: 24 in.
- Made from 14-gauge steel
-

Standard Shipping
$31.49
Features
- Can be used where quick-to-install posts are needed, including fencing and mailbox applications
- Black powder-coated steel construction for reliable strength and decorative finish
- Approved for installation with the Strong-Drive® SDS Connector screw
-

Standard Shipping
$141.75
-

Standard Shipping
$6.09
Features:
- Designed to help resist download forces
- The unique two-level embossment provides added stiffness to the top flange
- Quick installation
- Nominal joist size: 2×6
- Made from 14-gauge steel
-

Standard Shipping
$50.82
Features
- Combined with the Outdoor Accents structural wood screw (SDWSDBB), it provides a structural load-rated solution
- Easy to install
- Code listed in IAPMO-UES ER-192
-

Quote Request - Shipping Calculated Later
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
-

Standard Shipping
$17.47
Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design
- Install with Outdoor Accents structural screws and hex-head washer for decorative look (sold separately)
-

Standard Shipping
$4.42
APLH light hangers connect 2x joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents connector screw
-

ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
-

Standard Shipping
$41.72
Features
- Use with Outdoor Accents decorative hardware and STN22 hex-head washer for an appealing look
- Use Outdoor Accents structural screw without the washer as a wood-to-wood fastener
- Deep 6-lobe T40 recess provides easy, secure driving (T40 drive bit included in multi-count packages)
- Patented SawTooth® point (3 1/2″ and 5 1/2″ screws only) ensures fast starts, reduces installation torque and eliminates the need for predrilling in most applications; Type-17 point on 2″ screw ensures fast starts
- Black double-barrier coating offers premium look while providing a medium level of corrosion protection for many outdoor applications
-


Standard Shipping
$46.31
Features:
- Increased uplift resistance for wind or seismic loading
- Bolt hole locations meet code-required spacing for optimal capacity
- Nominal column size: 6×6
- Made from 7-gauge steel
- Galvanized (G90) for extra corrosion resistance
-


Free Shipping
$243.85
Features:
- Tabs inside the MPBZ provide the code-required 1 in. post standoff to help prevent rot from standing water and ground moisture
- Stamped indicators and internal tabs identify the required concrete embedment depth
- Strategically placed holes simplify installation to allow template attachment
- Optional obround holes have been added for attaching trim material
- Additional holes at the embedment line allow standing water to exit and a point of visual inspection
-


Standard Shipping
$4.56
Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design
- Stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
- Install with Outdoor Accents connector screws for decorative look and maximum strength (sold separately)
- ZMAX® galvanization with a black powder coat offers extra corrosion resistance for exterior and treated-wood applications
- The APVA4 is designed for use with 4x or larger lumber
-


Special Order Shipping
$85.27