Price

Category

Product Type

Applications

Show value(s)

Gauge

Brand

Length (in)

Showing 1–40 of 80 results

  • Simpson Strong-Tie HETA24 HETA 24 in. Galvanized Heavy Embedded Truss Anchor

    Standard Shipping

    $4.07

    Features:

    • An indented embedment line ensures accurate embedment depth
    • Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
    • Load rated for wind and seismic forces
    • 20-in. exposed length
    • Embed 4 in. into a poured concrete bond beam or grouted block wall
    Simpson Strong-tie HETA24 Product Page
    Add To Cart
  • Simpson Strong-Tie H2.5A H2.5A 18-Gauge Galvanized Hurricane Tie

    Standard Shipping

    $0.52

    Features:

    • Embossments in bend line strengthen connection
    • The top flange features an arrow line indicator to aid correct installation
    • Made from 18-gauge steel
    • Galvanized (G90) for extra corrosion resistance
    Simpson Strong-tie H2.5A Product Page
    Add To Cart
  • Simpson Strong-Tie STHD10 STHD 24-5/8 in. 12-Gauge Galvanized Strap-Tie Holdown

    Standard Shipping

    $20.79

    Features:

    • The nailing pattern allows for nailing to the edges of double 2x’s
    • Strap nail slots are countersunk to provide a lower nail head profile
    • The slots below the embedment line enable increased front-to-back concrete bond and help to reduce spalling
    • Standard strap length: 24-5/8 in.
    • Made from 12-gauge steel
    Simpson Strong-tie STHD10 Product Page
    Add To Cart
  • Simpson Strong-Tie CBSQ66-SDS2 CBSQ Galvanized Standoff Column Base for 6×6 with SDS Screws

    Standard Shipping

    $64.55

    Features:

    • Uses Strong-Drive screws, which allow for fast installation, reduced reveal and high capacity
    • Provides a 1-in. standoff between post and concrete that meets code requirements
    • Embeds in wet concrete at time of pour
    • The standoff base reduces the potential for decay at post and column ends
    • Shipped with base plate assembled
    Simpson Strong-tie CBSQ66-SDS2 Product Page
    Add To Cart
  • BC4Z-R

    Simpson Strong-Tie BC4Z-R BC ZMAX Galvanized Post Cap for 4x

    Standard Shipping

    $12.27

    Features

    • Opposing flanges provide increased lateral resistance
    • Attains full allowable load using either common nail or pneumatic nail sizes
    • Light-gauge material designed for light-duty applications
    Add To Cart
  • CC5 1/4-6

    Simpson Strong-Tie CC5 1/4-6 CC Column Cap for 5-1/8 in. Beam, 6x Post

    Standard Shipping

    $124.29

    Features

    • Certified welds for confidence in strength and loading
    • Uplift loads increased for earthquake or wind loading
    • Bolt spacing that meets NDS code requirements to ensure optimal performance
    • Diamond holes to provide temporary fastening
    Add To Cart
  • Simpson Strong-Tie CC66 CC Column Cap for 6x Beam 6x Post

    Standard Shipping

    $107.39

    Features

    • Certified welds for confidence in strength and loading
    • Uplift loads increased for earthquake or wind loading
    • Bolt spacing that meets NDS code requirements to ensure optimal performance
    • Diamond holes to provide temporary fastening
    Add To Cart
  • Simpson Strong-Tie APLH210R Outdoor Accents ZMAX, Black Light Joist Hanger for 2×10 Rough

    Standard Shipping

    $5.48

    Features

    • 14 gauge
    • ZMAX galvanized with black powder coat
    Add To Cart
  • LUS26Z

    Simpson Strong-Tie LUS26Z LUS ZMAX Galvanized Face-Mount Joist Hanger for 2×6

    Standard Shipping

    $1.45

    Features

    • Cannot be modified
    • Works for a wide range of applications
    • Features speed prongs used to temporarily position and secure the connector for easier and faster installation
    • LUS-series hangers are tested, load rated and code compliant
    Add To Cart
  • H10A

    Simpsons Strong-Tie H10A 18-Gauge Galvanized Hurricane Tie

    Standard Shipping

    $2.74

    Features

    • Forms part of a continuous load path to resist wind and seismic forces
    • The H10A-2 model holds a double-ply member and is approved for installation with the Strong-Drive® SD Connector screw
    • The H10AR model is designed for rough lumber sizes
    Add To Cart
  • APHH46

    Simpson Strong-Tie APHH46 Outdoor Accents ZMAX, Black Heavy Joist Hanger for 4×6

    Standard Shipping

    $25.28

    Features

    • Use all specified fasteners; see General Notes
    • Use the Outdoor Accents structural wood screw (SDWS22312DBB) and hex-head washer (STN22) to connect to the joist
    • Use the Strong-Drive SDS Heavy-Duty Connector screw (SDS25300) to connect to the header
    • Fasteners sold separately
    Add To Cart
  • LUS26Z

    Simpson Strong-Tie LUS26 LUS Galvanized Face-Mount Joist Hanger for 2×6

    Standard Shipping

    $1.19

    Features

    • Cannot be modified
    • Works for a wide range of applications
    • Features speed prongs used to temporarily position and secure the connector for easier and faster installation
    • LUS-series hangers are tested, load rated and code compliant
    Add To Cart
  • Simpson Strong-Tie LUS24Z LUS ZMAX Galvanized Face-Mount Joist Hanger for 2×4

    Standard Shipping

    $1.08

    Features

    • Cannot be modified
    • Works for a wide range of applications
    • Features speed prongs used to temporarily position and secure the connector for easier and faster installation
    • LUS-series hangers are tested, load rated and code compliant
    Add To Cart
  • LRU26Z

    [25 Pack] Simpson Strong-Tie LRU26Z LRUZ ZMAX Galvanized Slopeable Light Rafter U Hanger for 2×6

    Standard Shipping

    $5.38

    Features

    • The open design and ability to field-adjust the slope make the LRUZ ideal for both retrofit or new applications.
    • May be sloped down from 0° (0:12 pitch) to 49° (14:12). For slopes greater than 45°, allowable downloads are 0.85 of table loads.
    • May be sloped up from 0° to 45°.
    • For added versatility, the fasteners on the face of the hanger are placed high, enabling the bottom of the rafter to hang below the ridge beam (see “Max. C1” dimension in Standard Installation table).
    • Can be installed using nails or Strong-Drive SD Connector screws.
    Add To Cart
  • CC3146R

    Simpson Strong-Tie CC3 1/4-6 CC Column Cap for 3-1/8 in. Beam, 6x Post

    Standard Shipping

    $124.34

    Features

    • Certified welds for confidence in strength and loading
    • Uplift loads increased for earthquake or wind loading
    • Bolt spacing that meets NDS code requirements to ensure optimal performance
    • Diamond holes to provide temporary fastening
    Add To Cart
  • CC71-8-6

    Simpson Strong-Tie CC7 1/8-6 CC Column Cap for 7 in. Beam, 6x Post

    Standard Shipping

    $161.69

    Features

    • Certified welds for confidence in strength and loading
    • Uplift loads increased for earthquake or wind loading
    • Bolt spacing that meets NDS code requirements to ensure optimal performance
    • Diamond holes to provide temporary fastening
    Add To Cart
  • APLH26R

    Simpson Strong-Tie APLH26R Outdoor Accents ZMAX, Black Light Joist Hanger for 2×6 Rough

    Standard Shipping

    $4.42

    APLH light hangers connect 2x joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents connector screw

    Add To Cart
  • Post Base Spike

    [4 Pack] Simpson Strong-Tie FPBS44[4PCK] E-Z Spike™ Black Powder-Coated Post-Base Spike for 4×4

    Standard Shipping

    $139.08

    Features:

    • Can be used where quick-to-install posts are needed, including fencing and mailbox applications
    • Black powder-coated steel construction for reliable strength and decorative finish
    • Approved for installation with the Strong-Drive SDS Connector screw
    Add To Cart
  • APVA490 degree angle

    Simpson Strong-Tie APVA4 90 deg Angle Outdoor Accents Avant Collection ZMAX, Black Powder-Coated for 4x

    Standard Shipping

    $4.56

    Features

    • The Avant Collection features straight edges and chamfered corners for a clean, timeless design
    • Stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
    • Install with Outdoor Accents connector screws for decorative look and maximum strength (sold separately)
    • ZMAX® galvanization with a black powder coat offers extra corrosion resistance for exterior and treated-wood applications
    • The APVA4 is designed for use with 4x or larger lumber
    Add To Cart
  • CarEZ Base Gate

    [10 Pack] Simpson Strong-Tie FPBB44 E-Z Post Base for 4×4 – Black Powder-Coated

    Standard Shipping

    $25.99

    Features

    • Allows easy installation of 4×4 wood posts on existing concrete
    • Black powder-coated steel construction for reliable strength and decorative finish
    • Approved for installation with the Strong-Drive® SDS Connector screw
    Add To Cart
  • FPBS44

    Simpson Strong-Tie FPBS44 E-Z Spike Black Powder-Coated Post-Base Spike for 4×4

    Standard Shipping

    $31.49

    Features

    • Can be used where quick-to-install posts are needed, including fencing and mailbox applications
    • Black powder-coated steel construction for reliable strength and decorative finish
    • Approved for installation with the Strong-Drive® SDS Connector screw
    Add To Cart
  • APVA6

    Simpson Strong-Tie APVA6 Outdoor Accents Avant Collection ZMAX , Black Powder-Coated 90° Angle for 6x

    Standard Shipping

    $9.28

    Features

    • The Avant Collection features straight edges and chamfered corners for a clean, timeless design
    • Stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
    • Install with Outdoor Accents connector screws for decorative look and maximum strength (sold separately)
    Add To Cart
  • LRU26Z

    Simpson Strong-Tie LRU26Z LRUZ ZMAX Galvanized Slopeable Light Rafter U Hanger for 2×6

    Standard Shipping

    $6.12

    Features

    • The open design and ability to field-adjust the slope make the LRUZ ideal for both retrofit or new applications.
    • May be sloped down from 0° (0:12 pitch) to 49° (14:12). For slopes greater than 45°, allowable downloads are 0.85 of table loads.
    • May be sloped up from 0° to 45°.
    • For added versatility, the fasteners on the face of the hanger are placed high, enabling the bottom of the rafter to hang below the ridge beam
    • Can be installed using nails or Strong-Drive® SD Connector screws.
    Add To Cart
  • E-Z Mender

    Simpson Strong-Tie FPBM44E E-Z Mender 12-Gauge Black Powder-Coated Mender Plate for 4×4 Wood Post

    Standard Shipping

    $17.48

    Features

    • Allows easy repair of rotted or damaged wood posts installed in concrete or dirt
    • Black powder-coated steel construction for reliable strength and decorative finish
    • Approved for installation with the Strong-Drive® SD Connector screw
    • Reinforces weakened wood posts without having to replace the post or the concrete
    Add To Cart
  • Simpson Strong-Tie H2.5AZ H2.5A 18-Gauge ZMAX Galvanized Hurricane Tie

    Standard Shipping

    $0.65

    Features:

    • Embossments in bend line strengthen connection
    • The top flange features an arrow line indicator to aid correct installation
    • Made from 18-gauge steel
    • ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
    Simpson Strong-tie H2.5AZ Product Page
    Add To Cart
  • Simpson Strong-Tie BC46Z BC ZMAX Galvanized Post Cap for 4×6

    Standard Shipping

    $13.95

    Features:

    • Provides a positive connection for a post to a wood deck
    • Stronger than angled nailing or screw fastening
    • Reduces the chance of the post splitting and eliminates nailing into end grain
    • Not recommended for non top-supported installations (such as fences or unbraced carports)
    • Nominal post size: 4×6
    Simpson Strong-tie BC46Z Product Page
    Add To Cart
  • Simpson Strong-Tie HRS12 HRS 12 in. 12-Gauge Galvanized Heavy Strap Tie

    Standard Shipping

    $4.20

    Features:

    • A versatile, heavy-duty strap for a variety of connections and splices where extra strength is needed
    • Straight lines and chamfered edges offer a better appearance
    • Provides support in home repair and construction projects
    • Easy nailing pattern for connecting the sides of 2x members
    • Width: 1-3/8 in.
    Simpson Strong-tie HRS12 Product Page
    Add To Cart
  • Simpson Strong-Tie SUL26Z SUL ZMAX Galvanized Joist Hanger for 2×6 Skewed Left

    Standard Shipping

    $13.41

    Features:

    • SUL = skewed left
    • Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist
    • These hangers cannot be modified but will accommodate a 40 degree to 50 degree skewed joist
    • Available with the acute flange turned in to accommodate end-of-wall installation for solid sawn sizes only (SURC or SULC)
    • Nominal joist size: 2×6 or 2×8
    Simpson Strong-tie SUL26Z Product Page
    Add To Cart
  • Simpson Strong-Tie HTT5 HTT 16 in. 11-Gauge Galvanized Heavy Tension Tie

    Standard Shipping

    $32.01

    Features:

    • Ideal for retrofit or new construction projects
    • Can be installed with cast-in-place or post-installed anchor bolts
    • Four-ply formed steel provides increased tension capacity
    • Anchor bolt washers not required
    • 2-1/2 in. width x 16 in. length
    Simpson Strong-tie HTT5 Product Page
    Add To Cart
  • Simpson Strong-Tie CB66 CB Galvanized Column Base for 6×6

    Standard Shipping

    $46.31

    Features:

    • Increased uplift resistance for wind or seismic loading
    • Bolt hole locations meet code-required spacing for optimal capacity
    • Nominal column size: 6×6
    • Made from 7-gauge steel
    • Galvanized (G90) for extra corrosion resistance
    Simpson Strong-tie CB66 Product Page
    Add To Cart
  • Simpson Strong-Tie LUS28Z LUS ZMAX Galvanized Face-Mount Joist Hanger for 2×8

    Standard Shipping

    $2.04

    Features:

    • Patented double-shear nailing design provides greater strength with fewer nails
    • Speed prongs for fast and easy installation
    • Angled joist nailing easier in tight spaces
    • Do not bend or remove tabs
    • Nominal joist size: 2×8 and 2×10
    Simpson Strong-tie LUS28Z Product Page
    Add To Cart
  • Simpson Strong-Tie HTS24 HTS 24 in. 14-Gauge Galvanized Heavy Twist Strap

    Standard Shipping

    $3.81

    Features:

    • Available with the bend reversed
    • Straps do not need to be wrapped over the truss to achieve the allowable load
    • Versatile with many lengths offered to fit the specific application
    • Length: 24 in.
    • Made from 14-gauge steel
    Simpson Strong-tie HTS24 Product Page
    Add To Cart
  • Simpson Strong-Tie LUC210Z LUC ZMAX Galvanized Face-Mount Concealed-Flange Joist Hanger for 2×10

    Standard Shipping

    $3.03

    Features:

    • LUC-series hangers are tested, load rated and code compliant
    • The LUC series installs using several fastener selections with tested allowable loads
    • Suitable for nominal 2×10 and 2×12 lumber
    • Made from 18-gauge steel
    • ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
    Simpson Strong-tie LUC210Z Product Page
    Add To Cart
  • Simpson Strong-Tie LSTA18 LSTA 1-1/4 in. x 18 in. 20-Gauge Galvanized Strap Tie

    Standard Shipping

    $1.35

    Features:

    • Load-rated, precut strap designed for quick installation and optimal performance
    • Designed to resist wind and seismic forces
    • Floor-to-floor clear span application
    • Width: 1-1/4 in.
    • Length: 18 in.
    Simpson Strong-tie LSTA18 Product Page
    Add To Cart
  • Simpson Strong-Tie HDQ8-SDS3 HDQ 14-in. Galvanized Holdown w/ Strong-Drive SDS Screws

    Standard Shipping

    $77.26

    Features:

    • SDS screws are supplied with the holdowns to ensure proper fasteners are used
    • No stud bolts to countersink at openings
    • Height: 14 in.
    • Made from 7-gauge steel
    • Galvanized (G90) for extra corrosion resistance
    Simpson Strong-tie HDQ8-SDS3 Product Page
    Add To Cart
  • Simpson Strong-Tie H1Z H1 18-Gauge ZMAX Galvanized Hurricane Tie

    Standard Shipping

    $1.55

    Features:

    • Holds the rafter or truss on both sides for high lateral load resistance
    • Used for a variety of connections where one member crosses another
    • Can be installed on inside or outside of wall, or both sides
    • Can be installed with flanges facing either inward or outward
    • Made from 18-gauge steel
    Simpson Strong-tie H1Z Product Page
    Add To Cart
  • Simpson Strong-Tie HETA16 HETA 16 in. Galvanized Heavy Embedded Truss Anchor

    Standard Shipping

    $2.29

    Features:

    • An indented embedment line ensures accurate embedment depth
    • Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
    • Load rated for wind and seismic forces
    • 12-in. exposed length
    • Embed 4 in. into a poured concrete bond beam or grouted block wall
    Simpson Strong-tie HETA16 Product Page
    Add To Cart
  • Simpson Strong-Tie LGT2 LGT 2-Ply Girder Tiedown

    Standard Shipping

    $13.49

    Features:

    • Suitable for retrofit applications
    • The embossments add stiffness in crucial areas for improved performance
    • Simple to install and can be installed on the inside or outside of the wall
    • Load rated to resist high-wind forces
    • 2-ply
    Simpson Strong-tie LGT2 Product Page
    Add To Cart
  • Simpson Strong-Tie ABU66Z ABU ZMAX Galvanized Adjustable Standoff Post Base for 6×6

    Standard Shipping

    $53.96

    Features:

    • Attaches a post to existing concrete for decks, patio covers and other top-supported structures
    • Features 1-in. standoff to help prevent rot at post end
    • Slotted for adjustability
    • Designed for versatility, cost-effectiveness and maximum uplift performance
    • Nominal post size: 6×6
    Simpson Strong-tie ABU66Z Product Page
    Add To Cart
  • Simpson Strong-Tie LUS210Z LUS ZMAX Galvanized Face-Mount Joist Hanger for 2×10

    Standard Shipping

    $2.41

    Features:

    • Patented double-shear nailing design provides greater strength with fewer nails
    • Speed prongs for fast and easy installation
    • Angled joist nailing easier in tight spaces
    • Do not bend or remove tabs
    • Nominal joist size: 2×10, 2×12, 2×14
    Simpson Strong-tie LUS210Z Product Page
    Add To Cart