Showing 1–40 of 100 results

  • SET3G22-N 22-oz. High-Strength Epoxy Adhesive w/ Nozzle and Extension

    Standard Shipping

    $75.83

    Features:

    • Exceptional performance superior bond-strength values at long-term elevated temperature of 110 degreeF (43 degreeC) using optimized drill bit diameters
    • Tested and assessed in accordance with ICC-ES AC308 and ACI 355.4 for use in cracked and uncracked normal-weight and lightweight concrete
    • Design flexibility can be specified for dry or water-saturated conditions when temperatures range from -40 degreeF (-40 degreeC) to 176 degreeF (80 degreeC)
    • Jobsite versatility can be installed in dry, water-saturated or water-filled holes in base materials with temperatures between 40 degreeF (4 degreeC) and 100 degreeF (38 degreeC)
    • Maximized production and safety qualified for installation using the Speed Clean? DXS dust extraction drilling system as an alternative to the conventional blow-brush-blow hole-cleaning method
    Simpson Strong-tie SET3G22-N Product Page
    Add to cart Loading Done
  • H2.5AZ H2.5A 18-Gauge ZMAX Galvanized Hurricane Tie

    Standard Shipping

    $0.65

    Features:

    • Embossments in bend line strengthen connection
    • The top flange features an arrow line indicator to aid correct installation
    • Made from 18-gauge steel
    • ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
    Simpson Strong-tie H2.5AZ Product Page
    Add to cart Loading Done
  • WSV134S Strong-Drive WSV SUBFLOOR Screw Collated 9 x 1-3/4 in. T-25 Yellow-Zinc 2000-Qty

    Standard Shipping

    $132.72

    Features:

    • Redesigned tip and thread pattern provides easy starts and up to 25% less torque while driving makes for up to 20% faster driving
    • Less installation torque also means less wear on tools
    • Deep 6-lobed recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs
    • The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks
    • WSV screws can be easily backed out, allowing for future access to floor cavities
    Simpson Strong-tie WSV134S Product Page
    Add to cart Loading Done
  • BC46Z BC ZMAX Galvanized Post Cap for 4×6

    Standard Shipping

    $13.95

    Features:

    • Provides a positive connection for a post to a wood deck
    • Stronger than angled nailing or screw fastening
    • Reduces the chance of the post splitting and eliminates nailing into end grain
    • Not recommended for non top-supported installations (such as fences or unbraced carports)
    • Nominal post size: 4×6
    Simpson Strong-tie BC46Z Product Page
    Add to cart Loading Done
  • HRS12 HRS 12 in. 12-Gauge Galvanized Heavy Strap Tie

    Standard Shipping

    $4.20

    Features:

    • A versatile, heavy-duty strap for a variety of connections and splices where extra strength is needed
    • Straight lines and chamfered edges offer a better appearance
    • Provides support in home repair and construction projects
    • Easy nailing pattern for connecting the sides of 2x members
    • Width: 1-3/8 in.
    Simpson Strong-tie HRS12 Product Page
    Add to cart Loading Done
  • EDT22S Steel Dispensing Tool for 22 oz. Adhesive Cartridges

    Standard Shipping

    $121.18

    Features:

    • Manual dispensing tool
    • Features a steel carriage and is engineered for high-volume, continuous use
    • The tool can be easily convert from dispensing a 22 oz. 1:1 ratio cartridge to a 16.5 oz. 2:1 ratio cartridge
    • For 22 oz. adhesive cartridges
    Simpson Strong-tie EDT22S Product Page
    Add to cart Loading Done
  • SUL26Z SUL ZMAX Galvanized Joist Hanger for 2×6 Skewed Left

    Standard Shipping

    $13.41

    Features:

    • SUL = skewed left
    • Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist
    • These hangers cannot be modified but will accommodate a 40 degree to 50 degree skewed joist
    • Available with the acute flange turned in to accommodate end-of-wall installation for solid sawn sizes only (SURC or SULC)
    • Nominal joist size: 2×6 or 2×8
    Simpson Strong-tie SUL26Z Product Page
    Add to cart Loading Done
  • SSDWP3S305 Deck-Drive DWP WOOD SS Screw Collated 10 x 3 in. T25 6-Lobe Type 305 1000-Qty

    Free Shipping

    $308.77

    Features:

    • Flat head
    • Unique box thread design with raised-ridge technology greatly reduces driving torque
    • Specially designed sharp point penetrates hard wood products with ease
    • 6-lobe drive helps prevent driver-bit cam-out while driving easier and extending bit life (replacement bit BITTX25)
    • Length: 3 in.
    Simpson Strong-tie SSDWP3S305 Product Page
    Add to cart Loading Done
  • MASB MASB 16-Gauge Galvanized Masonry Mudsill Anchor

    Standard Shipping

    $2.39

    Features:

    • Anchors mudsill to concrete block, poured walls or slab foundations
    • Fill CMU cell with concrete grout first, then place MASB into the grouted cell and adjust into position
    • Attach mudsill to anchor only after the concrete grout cures
    • Nominal sill size: 2×4, 2×6
    • Made from 16-gauge steel
    Simpson Strong-tie MASB Product Page
    Add to cart Loading Done
  • HTT5 HTT 16 in. 11-Gauge Galvanized Heavy Tension Tie

    Standard Shipping

    $32.01

    Features:

    • Ideal for retrofit or new construction projects
    • Can be installed with cast-in-place or post-installed anchor bolts
    • Four-ply formed steel provides increased tension capacity
    • Anchor bolt washers not required
    • 2-1/2 in. width x 16 in. length
    Simpson Strong-tie HTT5 Product Page
    Add to cart Loading Done
  • CB66 CB Galvanized Column Base for 6×6

    Standard Shipping

    $46.31

    Features:

    • Increased uplift resistance for wind or seismic loading
    • Bolt hole locations meet code-required spacing for optimal capacity
    • Nominal column size: 6×6
    • Made from 7-gauge steel
    • Galvanized (G90) for extra corrosion resistance
    Simpson Strong-tie CB66 Product Page
    Add to cart Loading Done
  • LUS28Z LUS ZMAX Galvanized Face-Mount Joist Hanger for 2×8

    Standard Shipping

    $2.04

    Features:

    • Patented double-shear nailing design provides greater strength with fewer nails
    • Speed prongs for fast and easy installation
    • Angled joist nailing easier in tight spaces
    • Do not bend or remove tabs
    • Nominal joist size: 2×8 and 2×10
    Simpson Strong-tie LUS28Z Product Page
    Add to cart Loading Done
  • PDPAWL-250 PDPAWL?.157 in. x 2-1/2 in. Powder-Actuated Pin w/ 1 in. Washer

    Standard Shipping

    $17.17

    Features:

    • The minimum effective shank length must equal or exceed the sum of the thickness of the attached material and the minimum embedment depth
    • Code listed per ICC-ES ESR-2138, Florida FL15730 and LA RR25469
    • Compatible with Simpson Strong-Tie powder-actuated tool systems as well as other common tools
    • .300-in. head diameter / .157-in. shank diameter
    • 1-in. washer
    Simpson Strong-tie PDPAWL-250 Product Page
    Add to cart Loading Done
  • HTS24 HTS 24 in. 14-Gauge Galvanized Heavy Twist Strap

    Standard Shipping

    $3.81

    Features:

    • Available with the bend reversed
    • Straps do not need to be wrapped over the truss to achieve the allowable load
    • Versatile with many lengths offered to fit the specific application
    • Length: 24 in.
    • Made from 14-gauge steel
    Simpson Strong-tie HTS24 Product Page
    Add to cart Loading Done
  • LUC210Z LUC ZMAX Galvanized Face-Mount Concealed-Flange Joist Hanger for 2×10

    Standard Shipping

    $3.03

    Features:

    • LUC-series hangers are tested, load rated and code compliant
    • The LUC series installs using several fastener selections with tested allowable loads
    • Suitable for nominal 2×10 and 2×12 lumber
    • Made from 18-gauge steel
    • ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
    Simpson Strong-tie LUC210Z Product Page
    Add to cart Loading Done
  • SET-XP10 SET-XP 8.5 oz. High-Strength Epoxy Adhesive Cartridge w/ 1 Nozzle and Extension

    Standard Shipping

    $34.30

    Features:

    • 1:1 two-component, high-solids, epoxy-based anchoring adhesive formula
    • Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to elevated temperatures and long-term sustained loads
    • Code listed under the IBC/IRC for cracked and uncracked concrete per ICC-ES ESR-2508
    • Code listed under the IBC/IRC for masonry per IAPMO UES ER-265
    • Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
    Simpson Strong-tie SET-XP10 Product Page
    Add to cart Loading Done
  • WSV212S Strong-Drive WSV SUBFLOOR Screw Collated 9 x 2-1/2 in. T25 Yellow-Zinc 1500-Qty

    Standard Shipping

    $151.76

    Features:

    • Redesigned tip and thread pattern provides easy starts and up to 25% less torque while driving makes for up to 20% faster driving
    • Less installation torque also means less wear on tools
    • Deep 6-lobed recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs
    • The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks
    • WSV screws can be easily backed out, allowing for future access to floor cavities
    Simpson Strong-tie WSV212S Product Page
    Add to cart Loading Done
  • WA62600MG Wedge-All 5/8 in. x 6 in. Mechanically Galvanized Expansion Anchor

    Standard Shipping

    $4.09

    Features:

    • One-piece, wrap-around clip ensures uniform holding capacity
    • Threaded end is chamfered for ease of starting nut
    • Diameter: 5/8 in.
    • Length: 6 in.
    • Made from mechanically galvanized carbon steel
    Simpson Strong-tie WA62600MG Product Page
    Add to cart Loading Done
  • LSTA18 LSTA 1-1/4 in. x 18 in. 20-Gauge Galvanized Strap Tie

    Standard Shipping

    $1.35

    Features:

    • Load-rated, precut strap designed for quick installation and optimal performance
    • Designed to resist wind and seismic forces
    • Floor-to-floor clear span application
    • Width: 1-1/4 in.
    • Length: 18 in.
    Simpson Strong-tie LSTA18 Product Page
    Add to cart Loading Done
  • HDQ8-SDS3 HDQ 14-in. Galvanized Holdown w/ Strong-Drive SDS Screws

    Standard Shipping

    $77.26

    Features:

    • SDS screws are supplied with the holdowns to ensure proper fasteners are used
    • No stud bolts to countersink at openings
    • Height: 14 in.
    • Made from 7-gauge steel
    • Galvanized (G90) for extra corrosion resistance
    Simpson Strong-tie HDQ8-SDS3 Product Page
    Add to cart Loading Done
  • H1Z H1 18-Gauge ZMAX Galvanized Hurricane Tie

    Standard Shipping

    $1.55

    Features:

    • Holds the rafter or truss on both sides for high lateral load resistance
    • Used for a variety of connections where one member crosses another
    • Can be installed on inside or outside of wall, or both sides
    • Can be installed with flanges facing either inward or outward
    • Made from 18-gauge steel
    Simpson Strong-tie H1Z Product Page
    Add to cart Loading Done
  • STHD10 STHD 24-5/8 in. 12-Gauge Galvanized Strap-Tie Holdown

    Standard Shipping

    $20.79

    Features:

    • The nailing pattern allows for nailing to the edges of double 2x’s
    • Strap nail slots are countersunk to provide a lower nail head profile
    • The slots below the embedment line enable increased front-to-back concrete bond and help to reduce spalling
    • Standard strap length: 24-5/8 in.
    • Made from 12-gauge steel
    Simpson Strong-tie STHD10 Product Page
    Add to cart Loading Done
  • HETA16 HETA 16 in. Galvanized Heavy Embedded Truss Anchor

    Standard Shipping

    $2.29

    Features:

    • An indented embedment line ensures accurate embedment depth
    • Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
    • Load rated for wind and seismic forces
    • 12-in. exposed length
    • Embed 4 in. into a poured concrete bond beam or grouted block wall
    Simpson Strong-tie HETA16 Product Page
    Add to cart Loading Done
  • LGT2 LGT 2-Ply Girder Tiedown

    Standard Shipping

    $13.49

    Features:

    • Suitable for retrofit applications
    • The embossments add stiffness in crucial areas for improved performance
    • Simple to install and can be installed on the inside or outside of the wall
    • Load rated to resist high-wind forces
    • 2-ply
    Simpson Strong-tie LGT2 Product Page
    Add to cart Loading Done
  • ABU66Z ABU ZMAX Galvanized Adjustable Standoff Post Base for 6×6

    Standard Shipping

    $53.96

    Features:

    • Attaches a post to existing concrete for decks, patio covers and other top-supported structures
    • Features 1-in. standoff to help prevent rot at post end
    • Slotted for adjustability
    • Designed for versatility, cost-effectiveness and maximum uplift performance
    • Nominal post size: 6×6
    Simpson Strong-tie ABU66Z Product Page
    Add to cart Loading Done
  • LUS210Z LUS ZMAX Galvanized Face-Mount Joist Hanger for 2×10

    Standard Shipping

    $2.41

    Features:

    • Patented double-shear nailing design provides greater strength with fewer nails
    • Speed prongs for fast and easy installation
    • Angled joist nailing easier in tight spaces
    • Do not bend or remove tabs
    • Nominal joist size: 2×10, 2×12, 2×14
    Simpson Strong-tie LUS210Z Product Page
    Add to cart Loading Done
  • STB2-75812 Strong-Bolt 2 3/4 in. x 8-1/2 in. Wedge Anchor

    Standard Shipping

    $5.53

    Features:

    • Chamfered top designed to prevent mushrooming during installation
    • Qualified for static and seismic loading conditions (seismic design categories A through F)
    • Suitable for horizontal, vertical and overhead applications
    • Qualified for minimum concrete thickness of 3-1/4 in., and lightweight concrete-over-steel deck thickness of 2-1/2 in. and 3-1/4 in.
    • Tested per ACI355.2 and AC193
    Simpson Strong-tie STB2-75812 Product Page
    Add to cart Loading Done
  • HETA24 HETA 24 in. Galvanized Heavy Embedded Truss Anchor

    Standard Shipping

    $4.07

    Features:

    • An indented embedment line ensures accurate embedment depth
    • Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
    • Load rated for wind and seismic forces
    • 20-in. exposed length
    • Embed 4 in. into a poured concrete bond beam or grouted block wall
    Simpson Strong-tie HETA24 Product Page
    Add to cart Loading Done
  • WA62100 Wedge-All 5/8 in. x 10 in. Expansion Anchor

    Standard Shipping

    $5.29

    Features:

    • One-piece, wrap-around clip ensures uniform holding capacity
    • Threaded end is chamfered for ease of starting nut
    • Diameter: 5/8 in.
    • Length: 10 in.
    • Made from zinc-plated carbon steel
    Simpson Strong-tie WA62100 Product Page
    Add to cart Loading Done
  • LUS210-2Z LUS ZMAX Galvanized Face-Mount Joist Hanger for Double 2×10

    Standard Shipping

    $4.42

    Features:

    • Patented double-shear nailing design provides greater strength with fewer nails
    • Speed prongs for fast and easy installation
    • Angled joist nailing easier in tight spaces
    • Do not bend or remove tabs
    • Nominal joist size: Double 2×10 and Double 2×12
    Simpson Strong-tie LUS210-2Z Product Page
    Add to cart Loading Done
  • BC6Z BC ZMAX Galvanized Post Cap for 6x

    Standard Shipping

    $30.43

    Features:

    • Provides a positive connection for a post to a wood deck
    • Stronger than angled nailing or screw fastening
    • Reduces the chance of the post splitting and eliminates nailing into end grain
    • Not recommended for non top-supported installations (such as fences or unbraced carports)
    • Nominal post size: 6x
    Simpson Strong-tie BC6Z Product Page
    Add to cart Loading Done
  • LUS28-3Z LUS ZMAX Galvanized Face-Mount Joist Hanger for Triple 2×8

    Standard Shipping

    $8.12

    Features:

    • Patented double-shear nailing design provides greater strength with fewer nails
    • Speed prongs for fast and easy installation
    • Angled joist nailing easier in tight spaces
    • Do not bend or remove tabs
    • Nominal joist size: Triple 2×8 and Triple 2×10
    Simpson Strong-tie LUS28-3Z Product Page
    Add to cart Loading Done
  • WA75614 Wedge-All 3/4 in. x 6-1/4 in. Expansion Anchor

    Standard Shipping

    $3.37

    Features:

    • One-piece, wrap-around clip ensures uniform holding capacity
    • Threaded end is chamfered for ease of starting nut
    • Diameter: 3/4 in.
    • Length: 6-1/4 in.
    • Made from zinc-plated carbon steel
    Simpson Strong-tie WA75614 Product Page
    Add to cart Loading Done
  • DIABST50-SDS SDS-plus Setting Tool for 1/2-in. Rod DIAB Drop-In Anchor

    Standard Shipping

    $35.93

    Features:

    • SDS-plus shank power setting tool for DIAB anchors
    • For use with Simpson Strong-Tie Drop-In models DIAB50, DIABL50, and DIAB50C
    • Sets drop-ins for overhead applications
    • Drop-in anchors are sold separately
    • Made from carbon steel
    Simpson Strong-tie DIABST50-SDS Product Page
    Add to cart Loading Done
  • HHUS48 HHUS Galvanized Face-Mount Joist Hanger for 4×8

    Standard Shipping

    $13.88

    Features:

    • Features double-shear nailing which distributes the load through two points on each joist nail for greater strength
    • Allows for the use of fewer nails, faster installation, and the use of standard nails for all connections
    • Do not bend or remove tabs
    • Nominal joist size: 4×8
    • Made from 14-gauge steel
    Simpson Strong-tie HHUS48 Product Page
    Add to cart Loading Done
  • MAB15Z MAB 13-1/8 in. ZMAX Galvanized Mudsill Anchor

    Standard Shipping

    $1.13

    Features:

    • Anchors mudsill to concrete block, poured walls or slab foundations
    • Nominal sill size: 2×4, 2×6, 2×8, 2×10, 2×12
    • Made from 18-gauge steel
    • ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
    Simpson Strong-tie MAB15Z Product Page
    Add to cart Loading Done
  • H2.5A H2.5A 18-Gauge Galvanized Hurricane Tie

    Standard Shipping

    $0.52

    Features:

    • Embossments in bend line strengthen connection
    • The top flange features an arrow line indicator to aid correct installation
    • Made from 18-gauge steel
    • Galvanized (G90) for extra corrosion resistance
    Simpson Strong-tie H2.5A Product Page
    Add to cart Loading Done
  • MP24 MP 2 in. x 4 in. 20-Gauge Galvanized Mending Plate

    Standard Shipping

    $0.74

    Features:

    • A versatile and easy-to-use mending plate for wood-to-wood connections
    • These non-structural connectors are ideal for general fix-up work
    • Installs without nails; align wood with arrows at joint and hammer plate to embed prongs
    • Used for non-structural applications only (not for truss applications)
    • Width: 2 in.
    Simpson Strong-tie MP24 Product Page
    Add to cart Loading Done
  • BP 3/8-2 BP 2 in. x 2 in. Bearing Plate with 3/8 in. Bolt Dia.

    Standard Shipping

    $0.96

    Features:

    • Bolt diameter: 3/8 in.
    • Dimensions: 2 in. x 2 in.
    • Made from 3/16 in. steel
    • Uncoated steel construction
    Simpson Strong-tie BP 3/8-2 Product Page
    Add to cart Loading Done
  • THD50300H Titen HD 1/2 in. x 3 in. Heavy-Duty Screw Anchor

    Standard Shipping

    $2.24

    Features:

    • Qualified for static and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
    • Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
    • Hex-washer head requires no separate washer and provides a clean installed appearance
    Simpson Strong-tie THD50300H Product Page
    Add to cart Loading Done

This is the end

This is the end