Showing 1–40 of 140 results
-


Free Shipping
$652.00
Features
- Makita-built brushless motor provides power equivalent to a 30cc gas string trimmer
- Automatic Torque Drive Technology mode automatically shifts from 4,000-6,000 RPM for extended run time or added power
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- No gas, emissions, oil mixing or pull starts
- High performance with low noise levels
-


Special Order Shipping
$392.06
Features
- BRUSHLESS MOTOR delivers up to 2,100 lbf of pulling force for fastening rivets, including those made of stainless steel
- 800 RIVETS PER CHARGE** to maximize productivity on the jobsite
- DESIGNED FOR EASE OF USE with tool-free nose change and on-board nose piece storage
- COMPATIBLE WITH MUTIPLE SIZE RIVETS including 3/32″, 1/8″, 5/32″, and 3/16″ rivets
- CAPABLE OF PULLING aluminum, steel, and stainless steel blind rivets
-


Free Shipping
$415.00
Features
- 18V LXT® Lithium-Ion battery provides up to 20 minutes of continuous run time
- Variable speed control dial (6,000-20,000 OPM) enables user to match the speed to the application
- 3.2° oscillation angle engineered for faster, more aggressive cutting and sanding
- Large on/off slide switch with lock-on button for operator convenience
- Includes adapters to fit most competitive accessories
-


Out of stock product
$503.71
Features
- Mix up to 19 premixed drywall buckets (5 gal.) on a single charge using the DCB606 DEWALT FLEXVOLT® battery (6Ah)**
- Mix up to 17 buckets of tile mortar (5 gal.) on a single charge using THE DCB606 FLEXVOLT battery (6.0Ah)**
- Mix up to 9 buckets of concrete (4.5 gal.) on a single charge using THE DCB606 FLEXVOLT battery (6.0Ah)**
- 3-Position side handle allows for optimum position while mixing
- Integrated E-Clutch System helps to improve user control
-
New Product


Free Shipping
$349.56
Features
- The Dewalt DCN623D1 unit works with 23 Ga. pin nails from 5/8″ up to 1-1/2 in. in length
- tool-free jam release and tool-free depth adjust
- Low nail lockout system with LED indicator to inform user when it’s time to reload
- Drives 2,000 nails on average per charge
-
New Product


Free Shipping
$222.21
Features
- The Dewalt DCF850E1 includes a Compact impact driver, under 4 in. design for optimized ergonomics and access to difficult-to-reach spots
- Delivers 1,825 in-lbs of torque and 3,250 RPM to drive large diameter screws
- Enabled by variable 3-speed trigger
- Integrated 3-LED work light enhances visibility in dimly lit spaces
-
New Product


Free Shipping
$422.82
Features
- The Dewalt DCK265D2 has a Brushless motor for efficient performance and runtime
- Wide variable speed range with dedicated High and Low settings helps optimize usage in light- and heavy-gauge substrates
- Four dedicated tool modes enable operation of tool in Trigger Mode (High Speed), Trigger Mode (Low Speed), PushStart Mode, and Lock-On Mode
- Top-mounted electronic mode select enables fast, one-handed switching between the tool’s four modes
- Tool-free bit change enables fast bit changes without the need for a wrench
-
New Product


Free Shipping
$285.81
Features
- The Dewalt DCK279C2 includes the DCD709 hammer drill/driver, compact at only 6.9 in. front to back designed to fit in tight spaces
- DCD709 hammer drill/driver is lightweight at only 2.5 lbs.
- DCF809 Impact Driver is only 5.1 in. in length to fit in tight spaces.
- DCF809 Impact Driver has 1700 in-lbs of torque delivering the power you need to get a majority of applications done
- DCF809 Impact Driver is lightweight at only 2.1 lbs.
-
New Product

$714.98
Features
- Work in tight spaces with the lightweight, compact 7-1/2 in. Drill/Driver and 5-2/5 in. Cordless Impact Driver included in the Dewalt DCKSS676D2
- Brighten dark work areas: DCD777 Cordless Drill/Driver features an LED work light with 20-second trigger-release delay for enhanced visibility
- Professional speed and application control with DCF787 Cordless Impact Driver”s variable speed trigger for precision on delicate work surfaces
- Quick bevel adjustments: Brushless Circular Saw bevel shifts from 0 – 50° with a tool-free lever
- Quickly change blades and attachments without wrenches using the DCS356 Quick Change accessory system
-
New Product


Free Shipping
$522.46
Features
- Dewalt DCE400D2 Expands 3/8 in. – 1 in. Pex Type-A tubing
- Automatic rotating head action for even expansion
- Full trigger actuation for use in tight spaces
- Bright LED work light to help illuminate dark areas
- Uses DEWALT® PEX Heads. Compatible with Milwaukee® and Uponor® Heads. (Milwaukee® is a registered trademark of Milwaukee Electric Tool Corp. Uponor® is a registered trademark of Uponor Oyj.)
-
New Product


Special Order Shipping
$542.38
Features
- Dewalt DCD460T2 60V Max brushless motor for increase power and runtime
- Power of a cord with cordless freedom
- Adjustable bail handle and 2-position side handle for leverage and control
- 2 variable speed ranges (0-300 / 0-1250 rpm) to match appropriate speed to the application
- Metal-gear housing for jobsite durability and increased reliability
-
New Product


Free Shipping
$232.68
Features
- Complete challenging projects with up to 40% more with the Dewalt DCD800P1 vs. the DCD791B using DCB205 battery (sold separately)
- Access hard to reach work areas: Compact 6.37 in. size is 1/2 in. shorter in length compared to the DCD791, tool head only.
- High bit retention with 1/2 in. metal ratcheting chuck
- Pro-level speed, control and precession: High-speed transmission with variable trigger and 2 speed settings (0-650/0-2,000 rpm)
- Brighten dark work areas: Adjustable 3-Position, 3 Mode LED with up to 70 Lumens, including LED spotlight mode which features a 20-minute shutoff function for extended work time in low-light spaces
-
New Product


Standard Shipping
$155.07
Features
- The Dewalt DCD793D1 is over 2in. shorter in length at 6.38 in. (tool head length only) to tackle tough jobs.
- Get up to 16% more power with 404 UWO and up to 1,650 RPMs no load for a variety of drilling applications.
- High bit retention with 1/2 in. ratcheting chuck
- Illuminate workspaces using the on-tool LED work light
-
New Product


Free Shipping
$1,002.95
Features
- The Dewalt DCS692X2 protects against damage in harsh jobsite conditions: Durable latched and sealed battery box accepts DCB615 battery (battery sold separately)
- Help prevent accidental activation with 2-stage trigger switch designed to promote safe usage
- Designed to enhance productivity: Connect to other compatible tools and operate cord-free on the jobsite with WIRELESS TOOL CONTROL
- Get real-time power and runtime feedback to help you manage your output with an integrated heavy-load indicator light
- High depth of cut: 3-1/4 in. cut depth for single pass in pavestones, rebar cutting, and concrete scoring
-
New Product


Free Shipping
$640.00
Features
- Dewalt DCG460X2 3,000 MWO Brushless Motor – Brushless Motor Motor Producing 3,000 MWO Delivers Incredible Power for Extreme Applications
- Kickback Brake – Kickback Brake engages when a pinch, stall, or bind-up event is sensed
- E-Clutch – E-Clutch proactively stalls motor when tool is under too much load
- WTC – Wireless Tool Control enables connectivity to WTC enabled Vacuums
- Chip-Ready – Tool Connect Integrated Chip Pocket
-
New Product


Free Shipping
$327.53
Features
- Dewalt DCF500GG1 brushless motor delivers 50 ft-lbs of max torque and a no-load speed of 0-450 RPM
- Interchangeable anvil design provides the ability to quickly swap between 3/8″ square drive, and 1/4″ square drive, and 1/4″ quick change hex
- Oil resistant glass filled nylon tool housing resists effects of harsh automotive oils and solvents
-
New Product


Free Shipping
$395.53
Features
- DEWALT DCF510GE1 brushless motor delivers 75 ft-lbs of max torque and a no-load speed of 0-300 RPM
- Interchangeable anvil design provides the ability to quickly swap between 3/8″ and 1/2″ square drives
- Oil-resistant glass-filled nylon tool housing resists effects of harsh automotive oils and solvents
-
New Product


Free Shipping
$863.75
Features
- The Makita GT401M1D1 combo kit Variable 2-speed Hammer Driver-Drill with Makita-built brushless motor delivers (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM) and 1,250 in.lbs. of Max Torque
- Impact Driver features 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-4,400 IPM) provides 1,950 in.lbs. of Max Torque
- Recipro Saw delivers 0-2,300 (Low) & 0-3,000 (High) strokes per minute and a 1-1/4″ stroke length for faster cutting
- High-luminance 4 L.E.D. flashlight provides 160 lumens
- The Makita GT401M1D1XPT is engineered to provide increased dust and water resistance in harsh job site conditions
-
New Product


$484.00
Features
- The Makita XLC09R1B brushless motor runs cooler and more efficiently; delivering up to 125 Watts of power
- Push button 4-speed power selection (max/high/normal/quiet) for efficient operation
- Up to 23 minutes of continuous use in quiet mode from a single fully charged 18V 2.0Ah LXT® battery
- Bagless cloth filtration system allows for easier cleaning and quicker debris disposal
- Compact and ergonomic design for operator comfort
-
New Product


Free Shipping
$565.53
Features
- The DeWalt DCF961GP1 high Torque Power Impact Wrench: Tackle tough jobs effortlessly with the high torque capabilities of this impact wrench
- Advanced Brushless Technology: Enjoy longer runtime and increased efficiency with the innovative brushless motor
- Cordless Freedom: Experience the freedom of cordless operation with the 20V MAX* XR system
- Hog Ring Anvil: Easily swap sockets with the convenient hog ring anvil mechanism
- Get the job done efficiently and powerfully with the DeWalt DCF961GP1 Kit
-
New Product


Free Shipping
$484.00
Features
- Makita XLC10R1W brushless motor runs cooler and more efficiently; delivers up to 42 CFM
- Push button 4-speed power selection (max/high/normal/quiet) for efficient operation
- Up to 27 minutes of continuous use in quiet mode from a single fully charged 18V Compact 2.0Ah LXT® battery; optional 5.0Ah battery delivers up to 69 minutes of continuous use
- Accepts disposable paper or reusable cloth dust bags for added convenience
- Compact and ergonomic design for operator comfort
-
New Product

Free Shipping
$399.00
Features
- DeWalt DCK4050M2 Combo Kit
- DCD805: 40% more power versus the DCD796B using DCB205 battery or DCBP034 DEWALT POWERSTACK battery (sold separately)
- DCF850: Brushless motor that delivers up to 1,825 in-lb of torque and 3,250 rpm for driving large-diameter screws
- DCS356: The DUAL-GRIP variable-speed trigger and 3-speed selector provide ultimate speed and application control, and the bright LED illuminates dark workspaces.
- DCS382: FAST CUTS: Rapidly saw through various materials with 1-1/8 in. stroke length
-


Free Shipping
$509.33
Features
- Makita GSH05M1 is up to 40% faster cutting speed
- Magnesium base for durability and less weight
- Up to 290 cuts per charge in 2X10 SPF lumber using one 4.0Ah battery
- Makita-built brushless motor delivers 5,200 RPM for faster cutting performance
- Large 2-1/4″ cutting capacity at 90° and 1-5/8″ at 45°
-


Free Shipping
$383.00
Features
- Efficient Makita-built brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- Variable 2-speed 1/2″ Hammer Driver-Drill (0-550 & 0-1,800 RPM)(0-8,250 & 0-27,000 BPM) with brushless motor delivers 970 in.lbs. of Max Torque for up to 70% more power*; weighs only 4.9 lbs. with battery for a wide range of drilling, fastening and hammer drilling applications
- The brushless motor eliminates carbon brushes, enabling the motor to run cooler and more efficiently for longer life
- The electronically-controlled brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Optimization of motor specifications and gear ratios improves efficiency and allows the Hammer Driver-Drill to drill into 2x dimensional lumbers in high speed
-


Free Shipping
$395.00
Features
- Variable 2-speed design (0-550 & 0-1,800 RPM) (0-8,250 & 0-27,000 BPM) covers a wide range of drilling, driving and hammer applications
- Makita-built brushless motor delivers 970 in.lbs. of Max Torque for up to 70% more power*
- Efficient brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The brushless motor eliminates carbon brushes, enabling the brushless motor to run cooler and more efficiently for longer life
- The electronically-controlled brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
-


Special Order Shipping
$1,332.00
Features
- Makita-built brushless motor delivers the power of a 40cc gas brush cutter
- Automatic Torque Drive Technology mode automatically shifts from 3,500-6,400 RPM for extended run time or added power
- Up to 100 minutes of run time with (2) 40V XGT® 4.0Ah batteries
- No gas, emissions, oil mixing or pull starts
- High performance with low noise levels
-


Free Shipping
$840.00
Features
- Makita-built brushless motor delivers the power of a 22.7cc gas hedge trimmer
- Up to 13% more torque than gas for cutting thick branches
- Up to 6 hours of run time with 40V XGT® 4.0Ah battery
- No gas, emissions, oil mixing or pull starts
- High performance with low noise levels
-


Free Shipping
$680.00
Features
- Makita-built brushless motor delivers power of a 42cc gas chain saw
- 27% faster chain speed at 5,020 FPM*
- Extreme Protection Technology (XPTâ„¢) engineered for improved dust and water resistance
- No gas, emissions, oil mixing or pull starts
- High performance with low noise levels
-


Free Shipping
$282.66
Features
- No gas, emissions, oil mixing or pull starts
- High performance with low noise levels
- Reduced maintenance lowers operating costs and minimizes down time
- Weighs up to 30% less than gas models
- 24″ dual action double-sided steel blade provides optimal performance
-


Special Order Shipping
$1,061.43
Features
- BRUSHLESS MOTOR delivers up to 4,500 lbf of pulling force for fastening rivets, including those made of stainless steel
- GET UP TO 300 RIVETS PER CHARGE** to maximize productivity on the jobsite
- DESIGNED FOR EASE OF USE with tool-free nose change and on-board nose piece storage
- COMPATIBLE WITH MUTIPLE SIZE RIVETS including 3/16″, 15/64″, and 1/4″ rivets
- CAPABLE OF PULLING aluminum, steel, and stainless steel blind rivets
-


Free Shipping
$521.25
Features
- 1/2″ Driver-Drill with 2-speeds (0-600 & 0-1,900 RPM) delivers up to 480 in.lbs. of Max Torque
- 1/2″ Driver-Drill features a compact design at only 7-1/4″ long and weighs only 3.3 lbs. with battery for reduced operator fatigue
- Variable speed Impact Driver (0-2,900 RPM & 0-3,500 IPM) provides 1,460 in.lbs. of Max torque for a wide range of fastening applications
- 6-1/2″ Circular Saw delivers 3,700 RPM for faster cutting and ripping through wood and weighs only 7.3 lbs. with battery
- Recipro Saw provides 0-3,000 SPM and features “tool less” blade change; weighs only 3.9 lbs. with battery
-


Free Shipping
$2,158.75
Features
- Variable 2-speed 1/2″ Hammer Driver-Drill (0-600 & 0-1,900 RPM) with Makita-built 4-pole motor delivers 480 in.lbs. of Max Torque and weighs only 4.0 lbs. with battery
- 6-1/2″ Circular Saw delivers 3,700 RPM for faster cutting and ripping through wood and weighs only 7.3 lbs. with battery
- Reciprocating Saw provides 0-2,800 SPM with “tool-less” blade changes and weighs only 8.3 lbs. with battery
- Variable speed Impact Driver (0-2,900 RPM & 0-3,500 IPM) provides 1,460 in.lbs. of Max Torque and weighs only 2.8 lbs. with battery
- 1/2″ Impact Wrench delivers 170 ft.lbs. of Max Torque and weighs only 3.8 lbs. with battery
-


Free Shipping
$1,012.50
Features
- Efficient BLâ„¢ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BLâ„¢ Brushless Motor eliminates carbon brushes, enabling the BLâ„¢ Motor to run cooler and more efficiently for longer life
- The electronically-controlled BLâ„¢ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Variable 2-speed 1/2″ Hammer Driver-Drill (0-550 & 0-2,100 RPM) with BLâ„¢ Motor delivers 1,250 in.lbs. of Max Torque; weighs only 6.0 lbs. with battery for a wide range of drilling, fastening and hammer drilling applications
- Impact Driver features 3-speed power selection switch (0-1,100 / 0-2,100 / 0-3,600 RPM & 0-1,100 / 0-2,600 / 0-3,800 IPM) provides 1,550 in.lbs. of Max Torque; weighs only 3.3 lbs. with battery
-


Free Shipping
$700.00
Features
- Efficient BLâ„¢ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BLâ„¢ Brushless Motor eliminates carbon brushes, enabling the BLâ„¢ Motor to run cooler and more efficiently for longer life
- The electronically-controlled BLâ„¢ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Variable 2-speed 1/2″ Hammer Driver-Drill (0-550 & 0-2,100 RPM) (0-8,250 & 0-31,500 BPM) delivers 1,250 in.lbs. of Max Torque; weighs only 6.0 lbs. with battery
- Impact Driver features 3-speed power selection switch (0-1,100 / 0-2,100 / 0-3,600 RPM & 0-1,100 / 0-2,600 / 0-3,800 IPM) provides 1,550 in.lbs. of Max Torque; weighs only 3.3 lbs. with battery