Showing 681–720 of 7304 resultsSorted by popularity
-
![Ambi-dex 2920 Disposable Nitrile Glove, Powder Free with Textured Grip - 5 mil [1 box] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/2920_box-600x600.jpg "2920_box.jpg")
$11.29
Features:
- 2920 offers puncture resistance with great comfort, dexterity and tactile sensitivity
- Textured grip provides a good grip in wet or dry environments
- Contains no natural rubber latex proteins
- Meets Federal Regulations for food contact, 21 CFR 177.2600
- Industry Grade – For non-medical use
Minimum order quantity: 10
Order in multiples of: 1
-
$47.79
Features
- Multi layer cotton construction offers comfort, insulation and superior heat protection
- Clute cut provides a roomy fit
- Straight thumb increases comfort in closed-fisted work
- Nap-out finish for heat resistance
- Band Top cuff helps protect wrist area
-
![PIP 95-864 Economy
Polyester/Cotton Jersey Glove with Red Jersey Lining - Open Cuff [1 dozen] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/95-864-UP-600x600.jpg)
$20.79
Features:
- Cotton construction is breatheable and decreases hand fatigue
- Gunn cut pattern delivers excellent durability, wear and comfort, especially for heavier gloves
- Straight thumb increases comfort in closed-fisted work
- Slip-On cuff allows for easy on and off
- Heavy weight is excellent for cold applications
- Jersey lining is soft, warm, flexible, and stretchy
- Brown color hides the dirt and extends the wear
-
![PIP 58-8015 Premium PVC
Dipped Glove with Interlock Liner and Smooth Finish - Knit Wrist [1 dozen] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/58-8015-UP-600x600.jpg)
$25.39
Features:
- Interlock lining dries quickly, sheds little lint and offers great dexterity
- Black color styles hide dirt
- Single dip construction
- Knit Wrist helps prevent dirt and debris from entering the glove
-
![West Chester 1007RF PVC
Dipped Glove with Interlock Liner and Rough Sandy Finish - Knit Wrist [1
dozen] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/1007R-600x600.jpg)
$26.99
Features:
- Rough finish styles provide economical enhanced wet grip and cut resistance
- Interlock lined for great dexterity, dries quickly and sheds little lint
- Black color hides dirt
- Single dip construction
- Knit Wrist helps prevent dirt and debris from entering the glove
-
$212.99
Features
- Powerful 10.5 AMP motor delivers more output for increased performance
- Refined design at only 5.8 lbs. for reduced operator fatigue
- AC/DC switch for use with alternative power source
- Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life
- Externally accessible brushes for greater serviceability
-
$227.37
Features
- Makita HY00000212 features Solid rubberized wheels for easy job site portability)
- Large rubberized handle for added control)
- Hooks for easy hose storage)
- For use with Makita 2.5 HP High Pressure Air Compressor model AC310H)
-
6% OFF
$99.10 Original price was: $99.10.$93.28Current price is: $93.28.
Features
- 4″ swivel wheels, two with locking brake and two without
- Provides a lightweight and maneuverable means of transporting MAKPAC cases
- Practical way to move heavy Makita tools, accessories and more
- 220 lb. carrying capacity allows the cart to handle heavy loads
- Two handles to easily pick up and transport when not in use
- Two locking latches that secure MAKPAC cases to the cart for quick transportation
-
4% OFF
$152.50 Original price was: $152.50.$146.40Current price is: $146.40.
Features
- Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
- Provides up to 65% more run time per charge compared to BL1830
- Reaches full charge in 45 minutes or less
- Compatible only with STAR Protection tools, indicated by the Star symbol™ and/or yellow battery receiver under the tool
-
$151.23
Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THDB62800H4SS is tested in accordance with ACI355.2, AC193 and AC106
-
$62.17
Features
- THD37212CS is tested in accordance with ACI 355.2, AC193 and AC106
- Standard fractional sizes, hole size same as anchor size
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
-
$183.25
Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THDC25238H6SS is tested in accordance with ACI355.2, AC193 and AC106
-
6% OFF
$64.92 Original price was: $64.92.$61.02Current price is: $61.02.
Features
- Designed to install using a rotary hammer or hammer drill with standard ANSI drill bits — no special tools required
- THDB37158RH is code listed for cracked and uncracked concrete applications under the 2015, 2012 and 2009 IBC/IRC, per ICC-ES ESR-2713
- FM listed
-
$11.54
Features
- THDB62612HMGF1 is code-listed for exterior use
- Fully removable
- Hex washer head
- Optimized thread design
-
$92.31
Features
- THD50800H is tested in accordance with ACI 355.2, AC193 and AC106
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
$75.76
Features
- Allows the use of SDS-PLUS bits in Spline shank rotary hammers
- Engineered to hold up to the most demanding of applications
- High quality steel construction for longer life
- For use in rotary hammers that accept Spline shank bits
-
-
$57.56
CARRIER PRONG FOR BRICK CART, 7.5in
-
-
-
$28.87
FINISHING TROWEL, BLUE STEEL – 14X3 – WOOD HANDLE
-
$26.06
FINISHING TROWEL, BLUE STEEL – 12X3 – WOOD HANDLE
-
$68.84
PERMASHAPE BROKEN-IN TROWEL
-
-
$266.77
Features
- Tool head measures 12” x 12”
- 12SAT has a flexible neck for reduced vibration
- Ideal for smoothing and flattening dirt, stone, and other materials before a concrete pour
- Square head steel handle
12in x 12in SHOCK ABSORBING TAMPER
-
-
$342.09
Features
- T459 Comes with a dual adapter
- Variety of different sizes
- 10° offset handle allows for extra clearance against walls
-
-
-
-
$194.15
Features
- PAN24-4CEis made from beveled 13-gauge stee
- Has a ⅛” rise from the center to the edge of the pan
- 90° Lip Edger Pan
24IN. 4C EDGER POWER TROWEL PAN
-
$39.26
1-3/4in PB INSERT HANDLE, 96in BLUE
Minimum order quantity: 3
Order in multiples of: 3
-
$36.36
1-3/4in PB HANDLE, 96in BLUE
Minimum order quantity: 3
Order in multiples of: 3
-
-
$91.59
ROCK-IT 2.0 FLOAT BRACKET
-
$25.66
MINI ROCK-IT ANGLE ADAPTER
-
$121.34
SLICKER MINI RD,16ininW/EZ-TWIST
-
$57.89
BRONZE SINGLE END WALKING GROOVER
-
-
