Showing 1–40 of 5057 results
-

Rated 5.00 out of 5
Quote Request - Shipping Calculated Later
$0.00
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- Spacing: 6 x 6
- W/D Designation: W2.9/W2.9
- Gauge: 6/6
- Weight: 42LBS
-


Free Shipping
$289.88
Features:
- Full Case Containing 30 Rolls of Tie Wire
- Buy from an authorized Max USA Master Distributor
- Annealed steel wire – diameter 1.0mm
- For use with MAX RB441T TwinTier, RB611T, and RB401T-E TwinTier
-

Standard Shipping
$0.52
Features:
- Embossments in bend line strengthen connection
- The top flange features an arrow line indicator to aid correct installation
- Made from 18-gauge steel
- Galvanized (G90) for extra corrosion resistance
-


Standard Shipping
$0.66
Features
- Super soft Jelli Snug Plugs are washable and reusable
- FDA approved materials are non-toxic
- This product is made in the USA
- Flip-top case conveniently stores plugs
- Custom imprinting available on case top
-

Standard Shipping
$4.07
Features:
- An indented embedment line ensures accurate embedment depth
- Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
- Load rated for wind and seismic forces
- 20-in. exposed length
- Embed 4 in. into a poured concrete bond beam or grouted block wall
-


Standard Shipping
$0.94
Features:
- LU-series hangers are tested, load rated and code compliant
- The LU series installs using several fastener selections with tested allowable loads
- Precision-formed engineered for installation ease and design value
- Seat width: 1-9/16 in.
- Nominal joist size: 2×8, 2×10
-

Standard Shipping
$1.29
Features:
- High-Vis Polyester Shell for Comfort & Hand Awareness
- Black, Smooth Coated Nitrile Palm Dip Hides Dirt
- Good Abrasion & Light Oil Resistance
- Knit Wrist
Minimum order quantity: 12
Order in multiples of: 12
-


Free Shipping
$370.85
Features:
- Wire steel is melted, annealed, and drawn in the U.S.A
- Steel mill certification available
- For use with MAX RB441T TwinTier and RB401T-E TwinTier
-


Special Order Shipping
$6.49
-

Free Shipping
$19.13
Features:
- 8in Wide by 18 Inches Long
- Bar Mount On 48 Inch Power Trowel Machines
- Box of 4 Trowel Blades
- Longest Lasting Silver Blades

-

Quote Request - Shipping Calculated Later
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- 20′ sticks
- Available for fabrication
-

Standard Shipping
$3.35
APLH light hangers connect 2x joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents connector screw.
-

Standard Shipping
$1.13
Features:
- Anchors mudsill to concrete block, poured walls or slab foundations
- Nominal sill size: 2×4, 2×6, 2×8, 2×10, 2×12
- Made from 18-gauge steel
- ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
-


Standard Shipping
$29.10
Features:
- 10:1 two-component high-strength, acrylic-based anchoring adhesive
- Suitable for use under static and seismic loading conditions in cracked and uncracked concrete as well as masonry
- Easy hole-cleaning procedure ? no power-brushing required
- Suitable for use in dry or water-saturated concrete
- Low-odor formula dispenses easily at below-freezing temperatures without the need to warm cartridge
-


Standard Shipping
$16.87
Features
- White grain goat skin driver with Aramid lining
- Slip-on cuff design provides a comfortable fit
- TPR overlays provide added impact protection
- Load weight of 1851g
- Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (3 5 2 3).
- ANSI Cut Level A4, EN388 Cut Level 5
- ANSI/ISEA 138 Impact Level 1
-


Free Shipping
$366.10
Features:
- Galvanized Wire Resists Rust and Corrosion
- Steel mill certification available
- 19 Guage Rebar Tie Wire
- For use with MAX RB441T TwinTier and RB401T-E TwinTier
-

Standard Shipping
$19.66
Features:
- 8in X 14in
- Bar Mount
- Box of 4 blades

Minimum order quantity: 4
Order in multiples of: 4
-


Special Order Shipping
$3.81
HANDLE-STRUCTURAL FOAM, BLACK
Minimum order quantity: 12
Order in multiples of: 12
-

Standard Shipping
$5.19
Features
- The open design and ability to field-adjust the slope make the LRUZ ideal for both retrofit or new applications.
- May be sloped down from 0° (0:12 pitch) to 49° (14:12). For slopes greater than 45°, allowable downloads are 0.85 of table loads.
- May be sloped up from 0° to 45°.
- For added versatility, the fasteners on the face of the hanger are placed high, enabling the bottom of the rafter to hang below the ridge beam (see “Max. C1” dimension in Standard Installation table).
- Can be installed using nails or Strong-Drive SD Connector screws.
-


Special Order Shipping
$4.90
-


Special Order Shipping
$3.47
POINTING TROWEL
Minimum order quantity: 12
Order in multiples of: 12
-


Standard Shipping
$78.93
Features
- 18 gauge green High Performance Polyethylene (HPPE) provides cut resistance
- Black foam nitrile palm coating with PVC dots improves abrasion in wet or dry conditions
- Seamless cuff design provides a comfortable fit
- Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (4 3 4 1)
- Reinforced thumb crotch for more strength|ANSI Cut Level A2
-


Free Shipping
$128.99
Features
- 15AMP 5800RPM motor
- Heavy gauge aluminum base
- Lower guard design
- Two built-in LED lights
- Built-in dust blower
- AC/DC Power Switch for use with alternate power supplies
-


Standard Shipping
$11.31
Features
- White grain goatskin driver with TPR overlays
- Slip-on cuff design and keystone thumb provides a comfortable fit
- TPR overlays for added impact protection
- ANSI/ISEA 138 Impact Level 2
-


Standard Shipping
$1.22
Features:
- Can be used to make a connection to either the top or bottom plate
- Embossment in the angle reinforces the plate
- Sill plate installation: fill all round holes
- Width: 1-3/8 in.
- Height: 6-11/16 in.
-

Standard Shipping
$9.28
Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design
- Stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
- Install with Outdoor Accents connector screws for decorative look and maximum strength (sold separately)
-


Standard Shipping
$102.77
- 1-1/2×0.145in Smooth Shank Concrete Pin
- Max Powerlite Fasteners
- Plywood To Concrete
- Fiber Cement Siding To Concrete
- Mechanically Galvanized Carbon Steel
-


Standard Shipping
$20.99
Features
- Excellent for use in cold weather conditions or applications where fast cure is required
- Recognized per ICC-ES AC308 for threaded rod and rebar anchoring, along with post-installed rebar development and splice length design provisions
- Conventional blow-brush-blow hole cleaning technique using a wire brush — no power brushing required
- Base material installation temperatures down to 0°F (-18°C)
- Use in grout-filled CMU construction
-

-


Special Order Shipping
$5.07
GROOVER
Minimum order quantity: 12
Order in multiples of: 12
-


Special Order Shipping
$4.89
EDGER
Minimum order quantity: 12
Order in multiples of: 12
-

Standard Shipping
$38.59
Features
- Excellent for use in cold weather conditions or applications where fast cure is required.
- superior sustained load performance at elevated temperature.
- can be specified for dry and damp conditions when in-service temperatures range from -40°F (-40°C) to 180°F (82°C).
- Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to reduced and elevated temperatures and long-term sustained loads.
- Easy hole-cleaning procedure — no power-brushing required.
- Approved for installation with vacuum-drill bit system without further hole cleaning.
-

Special Order Shipping
$7.03
-

Standard Shipping
$8.31
Features
- Back of Glove is Elastic
- Comfortable Fit
- Keystone Thumb
- Split Leather Palm Patch
- Tough thread Double Stitching
-

Out of stock product
$169.99
Features
- REPLACED WITH 5.0AH BATTERY JPL91450A
- 14.4 Volts 4 Amp Hour capacity
- Works with RB217, RB218, RB397, RB398, RB441T, RB517, RB518, and PJID143 tool models.
- Fully charged in 40 minutes or less.
- Built in charge indicator gauge on battery casing.
- Compatible with Max JC914, JC925 and JC928 chargers.
-


Free Shipping
$2,784.93
Features:
- Double Tying Speed increases productivity
- Cost Saving – Mechanism dispenses precise amount of wire
- Shorter Tie Height
- Large Jaw – up to #7 x #7 rebar
- Long Battery Life up to 4,000 ties
- Easy Push Gear Release
- Fast Load Wire
-


Free Shipping
$279.64
Features
- 21 Gauge Steel Tie Wire
- Bare steel with no coating
- For use with MAX RB397, RB398, RB517 and RB518
-

Standard Shipping
$10.02
Features
- Installs quickly and easily with our Outdoor Accents 3 1/2″ structural wood screw and Outdoor Accents hex-head washer (sold separately)
- Easily attaches knee braces to posts or beams
- Adds decorative flair to knee brace connections
-

Standard Shipping
$11.29
Caiman? Multi-Activity Gloves are aptly named for their versatility in use. Whether for industrial or home use, Caiman? MAG? are designed to exceed expectations. By strategically using both genuine leather and engineered materials, Caiman? delivers exceptional hand protection in every glove.
-


Special Order Shipping
$3.24
TURTLE BACK SPONGE
Minimum order quantity: 24
Order in multiples of: 24