View cart “Max AKHL1260E Powerlite High Pressure Air compressor 500psi dual tank ultra quiet” has been added to your cart.
Showing 1–40 of 53 results
-
Free Shipping
$289.88
Features:
- Full Case Containing 30 Rolls of Tie Wire
- Buy from an authorized Max USA Master Distributor
- Annealed steel wire – diameter 1.0mm
- For use with MAX RB441T TwinTier, RB611T, and RB401T-E TwinTier
-
Free Shipping
$370.85
Features:
- Wire steel is melted, annealed, and drawn in the U.S.A
- Steel mill certification available
- For use with MAX RB441T TwinTier and RB401T-E TwinTier
-
Free Shipping
$366.10
Features:
- Galvanized Wire Resists Rust and Corrosion
- Steel mill certification available
- 19 Guage Rebar Tie Wire
- For use with MAX RB441T TwinTier and RB401T-E TwinTier
-
Free Shipping
$279.64
Features
- 21 Gauge Steel Tie Wire
- Bare steel with no coating
- For use with MAX RB397, RB398, RB517 and RB518
-
Free Shipping
$169.99
Features
- REPLACES JPL91440A 4.0AH BATTERY
- 14.4 Volts 5 Amp Hour capacity
- Works with RB217, RB218, RB397, RB398, RB441T, RB517, RB518, RB441T, RB611T, RB401T-E, and PJID143 tool models.
- Fully charged in 40 minutes or less.
- Built in charge indicator gauge on battery casing.
- Compatible with Max JC914, JC925 and JC928 chargers.
-
Free Shipping
$2,784.93
Features:
- Double Tying Speed increases productivity
- Cost Saving – Mechanism dispenses precise amount of wire
- Shorter Tie Height
- Large Jaw – up to #7 x #7 rebar
- Long Battery Life up to 4,000 ties
- Easy Push Gear Release
- Fast Load Wire
-
Standard Shipping
$102.77
- 1-1/2×0.145in Smooth Shank Concrete Pin
- Max Powerlite Fasteners
- Plywood To Concrete
- Fiber Cement Siding To Concrete
- Mechanically Galvanized Carbon Steel
-
$169.99
Features
- REPLACED WITH 5.0AH BATTERY JPL91450A
- 14.4 Volts 4 Amp Hour capacity
- Works with RB217, RB218, RB397, RB398, RB441T, RB517, RB518, and PJID143 tool models.
- Fully charged in 40 minutes or less.
- Built in charge indicator gauge on battery casing.
- Compatible with Max JC914, JC925 and JC928 chargers.
-
Free Shipping
$3,067.57
Features:
- Ties up to #9 x #10 rebar
- Double The Speed – Dual Wire Feeding Mechanism
- Dispenses precise amount of wire needed to form a tie
- Shorter Tie Height
- One charge yields up to 4,000 ties
- Easy Load Tie Wire with Quick Load magazine
-
Standard Shipping
$141.75
-
Free Shipping
$199.00
- Extension Arm is designed for adjustable height tying
- Compatible with RB441T, RB611T, RB398S, RB518, RB218, RB655
-
Features:
-
Free Shipping
$640.99
Features:
- Poly Coated Wire Resists Rust and Corrosion
- Use with epoxy coated rebar
- 19 Guage Rebar Tie Wire
- For use with MAX RB441T TwinTier and RB401T-E TwinTier
-
Special Order Shipping
$116.10
Features
- Tough, excellent strength of maximum working pressure 500 PSI
- Rubber/PVC blend construction
- Very flexible even in sub-zero temperatures
- 100-Feet x 3/8-Inch
- Solid brass connectors never corrode and give a better seal
- Abrasion-resistant outer cover
-
Special Order Shipping
$1,439.10
Features
- Max AKHL1260E features a Dc-Brushless Motor With Inverter Circuit
- Automatic system adjustment for maximum performance
- Quite mode
- LED control panel
- User friendly diagnostic system
- Four air outlets
-
Free Shipping
$1,129.00
Features
- Safer than conventional concrete pinn
- Drives .307″ head pins into concrete or steel with 2,231 inch lbs. driving force.
- Only 6.4lbs-this lightweight tool has less recoil than P.A.T tools.
- Self-cleaning filter for reliable operations
-
$947.15
Features
- DISCONTINUED – SEE DCS692X2 FOR UPDATED MODEL
- Cuts up to 25.5 ft. of 1 in. scoring in cure concrete per charge
- 3-1/4 in. depth of cut for single pass in pavestones, rebar cutting, and concrete scoring
- Heavy-load indicator light provides power and runtime feedback during demanding applications
- 5-position rotatable guard for approach angle selection, allowing for optimal visibility and accessibility when cutting in tight spaces
- Dual-sided water feed system offers an OSHA Table 1 Compliant solution for dust management when cutting concrete
-
Free Shipping
$335.30
The MAX CN80 is a safety equipped, lightweight yet heavy duty professional grade industrial coil nailer. Its die cast aluminum construction contributes to its lightweight. The CN80 is best used for industrial applications such as making pallets, crating, packaging, fences, decking, sheathing, furring, and siding.
-
Special Order Shipping
$262.48
Dewalt DCB406 40 V MAX Lithium Ion 6.0 Ah Battery The 40 V MAX Lithium Ion 6.0 Ah Battery 40V MAX* 6.0Ah premium battery provides 240 watt hours of energy (50% more capacity than the 4.0Ah battery) to deliver long runtime. All DEWALT 40V MAX* batteries are compatible with DEWALT 40V MAX* Outdoor Power Equipment.
-
Special Order Shipping
$392.06
Features
- The Dewalt DCF403D1 features a brushless motor delivers up to 2,100 lb of pulling force for fastening rivets, including those made of stainless steel
- 800 RIVETS PER CHARGE** to maximize productivity on the jobsite
- DESIGNED FOR EASE OF USE with tool-free nose change and on-board nose piece storage
- COMPATIBLE WITH MUTIPLE SIZE RIVETS including 3/32″, 1/8″, 5/32″, and 3/16″ rivets
- CAPABLE OF PULLING aluminum, steel, and stainless steel blind rivets
-
Special Order Shipping
$176.25
Features
- Powerful motor delivers up to 740 CFM on high setting
- Three speed settings (High/Medium/Low) and Oscillation selector for optimal air velocity and control
- Automatically oscillates 45º right and left
- Manually tilts 90º up and 45º down for convenient redirection of airflow
- 3-stage automatic timer with 1, 2, and 4 hour power-off selection
-
-
Free Shipping
$629.50
Features
- 21 Gauge Steel Tie Wire
- Bare steel with no coating
- For use with MAX RB397, RB398, RB517 and RB518
-
Special Order Shipping
$2,460.93
Features:
- 5 times faster than manual tying
- Lightweight and compact body for easy maneuvering and one handed operation
- Li-ion battery can complete 2600 ties per charge
- Ties approximately 120 times per coil.
- Brushless twisting motor
-
Special Order Shipping
$4,076.97
FEATURES
- REDUCES BACK STRAIN – The RB401T-E is an ergonomic solution for backbreaking slab work.
- ADJUSTABLE HANDLES – Users can adjust the handles to 2 positions, to find the most comfortable fit for their height.
- TRIGGERLESS TECHNOLOGY – An automatic contact mechanism (Pat. Pending) allows the tool to instantly tie when pushed down over a rebar intersection.
- SHORTER TIE HEIGHT (Pat. Pending) – A Wire Bending Mechanism produces a shorter tie height. Less concrete is needed to fully cover a wire tie.
- ENCLOSED DESIGN – Greater protection against debris and moisure entering the tool.
- QUICKLY & EASILY LOAD TIE WIRE – Rapidly load the dual wire coil with the quick load magazine design.
-
Free Shipping
$2,680.11
The RB518 is a battery operated rebar tying tool that can tie #5 x #5 to #7 x #8 rebar. You will save time, save money and increase productivity with this handy cordless tool. MAX Re-Bar-Tiers are also proven to reduce the risk of developing musculoskeletal diseases.
-
Free Shipping
$434.99
Features
- Keyless lever-action blade clamp for quick and easy blade changes
- Variable-speed trigger allows user to instantly control speed
- Pivoting shoe provides leverage for different applications
- LED helps illuminate dark jobsite work areas
- Rubber overmold grip for comfort
-
Special Order Shipping
$1,061.43
Features
- Dewalt DCF414GE2 features a BRUSHLESS MOTOR that delivers up to 4,500 lb of pulling force for fastening rivets, including those made of stainless steel
- GET UP TO 300 RIVETS PER CHARGE** to maximize productivity on the jobsite
- DESIGNED FOR EASE OF USE with tool-free nose change and on-board nose piece storage
- COMPATIBLE WITH MUTIPLE SIZE RIVETS including 3/16″, 15/64″, and 1/4″ rivets
- CAPABLE OF PULLING aluminum, steel, and stainless steel blind rivets
-
Free Shipping
$245.72
Features
- 4 Amp Hour (80 Watt hour) capacity provides extended runtime
- Same size & weight as DCB230 20V MAX* compact 3Ah battery
- Lighter weight with same capacity as DCB204 4Ah battery
- compatible with 20V MAX* tools and chargers
- Includes fuel gauge 3-LED charge indicator
-
Free Shipping
$1,059.99
Features
- Dewalt DCH775X2 offers rapid drilling and chipping in hard concrete with 19.4 J of impact energy
- Maintain speed under heavy loads with constant speed electronics
- Efficient performance and runtime with brushless motor and German-engineered apparatus
- Pro-grade versatility: Tackle horizontal and downward drilling for #9 – #14 rebar dowel applications, dry coring up to 6 in., chipping in any lower wall and floor, bushing, and ground rod driving
- Reduced vibration for comfortable grip Active Vibration Control
-
Special Order Shipping
$323.51
Features
- Dewalt DCN680D1 is 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Brushless motor maximizes runtime and durability
- Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC608)
- Tool-free depth adjustment for precise countersinking of nails
- Tool-free jam release to quickly and easily clear nail jams
-
Special Order Shipping
$155.07
Features
- Lightweight and compact for ultimate portability
- Ergonomics optimized for one-handed use
- Brushless motor for enhanced performance and extended life
- LED to help illuminate dark workspaces
- Variable-speed trigger provides user with improved speed control
-
Special Order Shipping
$286.11
Features
- Brushless motor provides runtime and efficiency to get the job done
- Variable speed control from 8,000 – 12,000 OPM to match the speed to the application.
- Low profile height allows user to get close to work surface for precise sanding.
- Replaceable 8-hole hook-and-loop sanding pad (DWE64233) for quick, easy paper changing.
- Dust-sealed switch to protect against dust ingestion for long switch life.
-
Special Order Shipping
$164.30
Features
- Brushless motor provides runtime and efficiency to get the job done
- Variable-speed control from 8,000 to 12,000 OPM to match the speed to the application.
- Low-profile height allows user to get close to work surface for precise sanding.
- Replaceable 8-hole hook-and-loop sanding pad (DWE64233) for quick, easy paper changing.
- Dust-sealed switch to protect against dust ingestion for long switch life
-
Special Order Shipping
$164.30
Features
- Brushless motor provides runtime and efficiency to get the job done
- Variable speed control from 8,000 – 14,000 OPM to match the speed to the application
- Low profile height allows user to get close to work surface for precise sanding
- Paper clamp designed to hold paper securely and allow for easy installation
- Dust-sealed switch to protect against dust ingestion for long switch life
-
Free Shipping
$298.75
Features
- Higher output power
- Delivers up to 25% longer run time*
- Battery charge level with 4 bright green L.E.D. indicators allows the user to clearly see charge level
- Reaches full charge in 50 minutes or less
- Enhanced cooling system is engineered to maximize battery life
-
Special Order Shipping
$532.55
Features
- LED indicators on the DEWALT 40V Max six-pack charging station specify which batteries are ready for use or in the process of charging
- Durable and weather-resistant construction handles consistent use in rough environments
- DEWALT jobsite battery charging station automatically fills battery that is closest to a complete charge
- 10-Amp charger quickly charges each battery in order
- Carries and charges up to six lithium-ion batteries to supply power to multiple tools
-
Special Order Shipping
$240.45
Features
- Get 50% more power†to tackle tough jobs
- Battery is 50% more efficient making it DEWALT®’s most efficient battery in its class
- The non-marring over-molded rubber base also helps to protect finished surfaces
- 2X lifespan provides more overall investment value.
- Battery works with all DEWALT 20V MAX tools and chargers
-
Special Order Shipping
$153.98
Features
- Brushless motor delivers up to 57% more run time over brushed
- Dual-Gripâ„¢ variable speed trigger gives users ultimate speed and application control
- Universal accessory adapter for use with most oscillating tool accessory brands
- Quick-Changeâ„¢ accessory system allows blades and attachments to be changed quickly without wrenches
- Bright LED Light illuminates dark work surfaces for accurate cutting
-
Special Order Shipping
$222.06
Features
- The 3-speed selector allows users to choose their speed setting based on application
- Brushless motor delivers up to 57% more runtime over brushed
- Dual-Gripâ„¢ variable-speed trigger gives users ultimate speed and application control
- Universal accessory adapter makes it compatible with most oscillating tool accessory brands
- Quick-Changeâ„¢ accessory system allows blades and attachments to be changed quickly without wrenches