Showing 41–80 of 141 results
-
Special Order Shipping
$1,332.00
Features
- Makita-built brushless motor delivers the power of a 40cc gas brush cutter
- Automatic Torque Drive Technology mode automatically shifts from 3,500-6,400 RPM for extended run time or added power
- Up to 100 minutes of run time with (2) 40V XGT® 4.0Ah batteries
- No gas, emissions, oil mixing or pull starts
- High performance with low noise levels
-
Free Shipping
$840.00
Features
- Makita-built brushless motor delivers the power of a 22.7cc gas hedge trimmer
- Up to 13% more torque than gas for cutting thick branches
- Up to 6 hours of run time with 40V XGT® 4.0Ah battery
- No gas, emissions, oil mixing or pull starts
- High performance with low noise levels
-
Free Shipping
$680.00
Features
- Makita-built brushless motor delivers power of a 42cc gas chain saw
- 27% faster chain speed at 5,020 FPM*
- Extreme Protection Technology (XPT™) engineered for improved dust and water resistance
- No gas, emissions, oil mixing or pull starts
- High performance with low noise levels
-
Free Shipping
$282.66
Features
- No gas, emissions, oil mixing or pull starts
- High performance with low noise levels
- Reduced maintenance lowers operating costs and minimizes down time
- Weighs up to 30% less than gas models
- 24″ dual action double-sided steel blade provides optimal performance
-
Special Order Shipping
$1,061.43
Features
- Dewalt DCF414GE2 features a BRUSHLESS MOTOR that delivers up to 4,500 lb of pulling force for fastening rivets, including those made of stainless steel
- GET UP TO 300 RIVETS PER CHARGE** to maximize productivity on the jobsite
- DESIGNED FOR EASE OF USE with tool-free nose change and on-board nose piece storage
- COMPATIBLE WITH MUTIPLE SIZE RIVETS including 3/16″, 15/64″, and 1/4″ rivets
- CAPABLE OF PULLING aluminum, steel, and stainless steel blind rivets
-
Free Shipping
$521.25
Features
- 1/2″ Driver-Drill with 2-speeds (0-600 & 0-1,900 RPM) delivers up to 480 in.lbs. of Max Torque
- 1/2″ Driver-Drill features a compact design at only 7-1/4″ long and weighs only 3.3 lbs. with battery for reduced operator fatigue
- Variable speed Impact Driver (0-2,900 RPM & 0-3,500 IPM) provides 1,460 in.lbs. of Max torque for a wide range of fastening applications
- 6-1/2″ Circular Saw delivers 3,700 RPM for faster cutting and ripping through wood and weighs only 7.3 lbs. with battery
- Recipro Saw provides 0-3,000 SPM and features “tool less” blade change; weighs only 3.9 lbs. with battery
-
Free Shipping
$2,158.75
Features
- Variable 2-speed 1/2″ Hammer Driver-Drill (0-600 & 0-1,900 RPM) with Makita-built 4-pole motor delivers 480 in.lbs. of Max Torque and weighs only 4.0 lbs. with battery
- 6-1/2″ Circular Saw delivers 3,700 RPM for faster cutting and ripping through wood and weighs only 7.3 lbs. with battery
- Reciprocating Saw provides 0-2,800 SPM with “tool-less” blade changes and weighs only 8.3 lbs. with battery
- Variable speed Impact Driver (0-2,900 RPM & 0-3,500 IPM) provides 1,460 in.lbs. of Max Torque and weighs only 2.8 lbs. with battery
- 1/2″ Impact Wrench delivers 170 ft.lbs. of Max Torque and weighs only 3.8 lbs. with battery
-
Free Shipping
$1,012.50
Features
- Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- The electronically-controlled BL™ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Variable 2-speed 1/2″ Hammer Driver-Drill (0-550 & 0-2,100 RPM) with BL™ Motor delivers 1,250 in.lbs. of Max Torque; weighs only 6.0 lbs. with battery for a wide range of drilling, fastening and hammer drilling applications
- Impact Driver features 3-speed power selection switch (0-1,100 / 0-2,100 / 0-3,600 RPM & 0-1,100 / 0-2,600 / 0-3,800 IPM) provides 1,550 in.lbs. of Max Torque; weighs only 3.3 lbs. with battery
-
Free Shipping
$700.00
Features
- Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- The electronically-controlled BL™ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Variable 2-speed 1/2″ Hammer Driver-Drill (0-550 & 0-2,100 RPM) (0-8,250 & 0-31,500 BPM) delivers 1,250 in.lbs. of Max Torque; weighs only 6.0 lbs. with battery
- Impact Driver features 3-speed power selection switch (0-1,100 / 0-2,100 / 0-3,600 RPM & 0-1,100 / 0-2,600 / 0-3,800 IPM) provides 1,550 in.lbs. of Max Torque; weighs only 3.3 lbs. with battery
-
Free Shipping
$925.00
Features
- Variable 2-speed Hammer Driver-Drill with Makita-built Brushless Motor delivers (0-550 & 0-2,100 RPM) and 1,250 in.lbs. of Max Torque; weights only 6.0 lbs. with battery
- Impact Driver features 4-speed power selection (0-1,100 / 0-2,100 / 0-3,200 / 0-3,600 RPM & 0-1,100 / 0-2,600 / 0-3,600 / 0-3,800 IPM) provides 1,600 in.lbs. of Max Torque; weighs only 3.4 lbs. with battery
- 7-1/4″ Circular Saw delivers 5,100 RPM for maximum performance and features a large 2-9/16” cutting capacity at 90°; weighs only 12.4 lbs. with batteries
- Recipro Saw delivers 0-2,300 (Low) & 0-3,000 (High) strokes per minute and a 1-1/4″ stroke length for faster cutting; weighs only 8.2 lbs. with battery
- High-luminance 4 L.E.D. flashlight provides 160 lumens
-
Free Shipping
$1,248.75
Features
- Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- The electronically-controlled BL™ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Variable 2-speed 1/2″ Hammer Driver-Drill (0-550 & 0-2,100 RPM) with BL™ Motor delivers 1,250 in.lbs. of Max Torque; weighs only 6.0 lbs. with battery
- Impact Driver features 3-speed power selection switch (0-1,100 / 0-2,100 / 0-3,600 RPM & 0-1,100 / 0-2,600 / 0-3,800 IPM) provides 1,550 in.lbs. of Max Torque; weighs only 3.3 lbs. with battery
-
Free Shipping
$262.50
Features
- Driver-Drill weighs only 2.9 lbs. with battery for reduced operator fatigue
- Compact and ergonomic design at only 5-7/8″ long
- Mechanical variable 2-speed transmission (0-500 & 0-1,700 RPM) for a wide range of drilling and fastening applications
- Makita-built Brushless Motor delivers 350 in.lbs. of Peak Torque
- Engineered with a metal jampot design for increased durability
-
Free Shipping
$437.50
Features
- Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- Brushless motor eliminates carbon brushes, enabling the brushless motor to run cooler and more efficiently for longer life
- The electronically-controlled brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Variable 2-speed 1/2″ Hammer Driver-Drill (0-550 & 0-2,100 RPM) with BL™ Motor delivers 1,250 in.lbs. of Max Torque; weighs only 6.0 lbs. with battery for a wide range of drilling, fastening and hammer drilling applications
- 3-stage L.E.D. gauge indicates battery charge level
-
Free Shipping
$593.75
Features
- Impact Driver features 3-speed power selection (0-1,100 / 0-2,100 / 0-3,600 RPM & 0-1,100 / 0-2,600 / 0-3,800 IPM) provides 1,550 in.lbs. of Max Torque; weighs only 3.3 lbs. with battery
- 7-1/4″ Circular Saw delivers 5,100 RPM for maximum performance and features a large 2-9/16” cutting capacity at 90°; weighs only 12.4 lbs. with batteries
- Efficient Makita-built brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The electronically-controlled brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Extreme Protection Technology (XPT™) which is engineered to provide increased dust and water resistance in harsh job site conditions
-
Free Shipping
$550.00
This item has been DISCONTINUED.
-
Free Shipping
$287.50
Features
- Driver-Drill weighs only 3.1 lbs. with battery for reduced operator fatigue
- Compact and ergonomic design at only 6-1/2″ long
- Mechanical variable 2-speed transmission (0-500 & 0-1,700 RPM) (0-7,500 & 0-25,500 BPM) for a wide range of drilling, fastening and hammer drilling applications
- Makita-built Brushless Motor delivers 350 in.lbs. of Peak Torque
- Engineered with a metal jampot design for increased durability
-
Free Shipping
$595.00
Features
- Makita-built brushless motor with variable speed control dial (600 – 2,200 RPM)
- Constant speed control automatically applies additional power under load for optimum performance
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
- Cordless solution for a variety of polishing applications where mobility is important
- Variable speed dial and trigger (0-2,200 RPM) enables user to match the speed to the application
-
Free Shipping
$521.25
Features
- Makita GTR01D1 built brushless motor delivers up to 1.5 HP
- The electronically-controlled brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
- XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
- Variable speed control dial (10,000 – 31,000 RPM) to match the speed to the application
- Electronic speed control maintains constant speed under load
-
Free Shipping
$525.00
Features
- Variable 2-speed Hammer Driver-Drill with Makita-built brushless motor delivers (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM) and 1,250 in.lbs. of Max Torque
- Impact Driver features 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-4,400 IPM) provides 1,950 in.lbs. of Max Torque
- XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- The digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating
-
Free Shipping
$611.25
Features
- Makita-built motor delivers 810 ft.lbs. of Nut-Busting Torque and 560 ft.lbs. of Fastening Torque
- 3 forward and 3 reverse Auto-Stop modes for increased efficiency
- XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
- 4-speed power selection switch (0-600 / 0-1,200 / 0-1,900 / 0-2,300 RPM & 0-1,200 / 0-1,900 / 0-2,700 / 0-2,900 IPM) for a wide range of applications
- Full speed mode function reduces trigger pull to reach full speed
-
Free Shipping
$537.50
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver powerful grinding and up to 60% faster cutting speed than predecessor models*
- X-LOCK quick change system allows for tool-free wheel changes with an easy snap-on mounting and fast change-outs by simply pulling a release lever
- Electronic current limiter helps protect the motor from overload in high torque application
- Electric brake stops the grinding or cut-off wheel in 2 seconds or less for maximum productivity
- Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the wheel is suddenly forced to stop
-
Free Shipping
$887.50
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power and performance required for heavy-load applications
- Constant speed control automatically applies additional power under load for optimum performance
- Overload protection is designed to protect the motor from burnout in abnormally high torque situations
- XGT® technology delivers up to 135 of 3/8″ holes using a fully charged 40V XGT® 4.0Ah battery*
- Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of bit is suddenly forced to stop
-
Free Shipping
$956.25
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power performance required for heavy-load application
- Constant speed control automatically applies additional power under load for optimum performance
- Overload protection is designed to protect the motor from burnout in abnormally high torque situations
- XGT® technology delivers up to 135 of 3/8″ holes per charge using full charged 40V XGT® 4.0Ah battery*
- Quick change chuck allows for interchangeability from SDS-PLUS to 1/2″ keyless chuck for utilization of straight shank bits
-
Special Order Shipping
$902.06
Features
- FAST DRILLING IN CONCRETE with 4.5 J of impact energy
- System reduces vibration felt by the user at the handles comparted to rotary hammers without this feature
- System shuts down the tool in bind up situations
- when paired with DWH200D shroud and DCV585 dust extractor
- to quickly switch between drilling, hammer drilling, and chipping applications
-
Special Order Shipping
$1,220.81
Features
- RAPID DRILLING AND CHIPPING in hard concrete with 13.3 J of impact energy
- MAINTAIN SPEED UNDER HEAVY LOADS with constant speed electronics
- EFFICIENT PERFORMANCE AND RUNTIME with brushless motor and German-engineered mechanism
- PRO-GRADE VERSATILITY: Tackle horizontal and downward drilling for #6 – #9 rebar dowel applications, dry coring up to 5 in., chipping in any lower-to-mid wall, bushing, and ground rod driving
- REDUCED VIBRATION FOR COMFORTABLE GRIP with SHOCKS™ Active Vibration Control®
-
Free Shipping
$1,059.99
Features
- Dewalt DCH775X2 offers rapid drilling and chipping in hard concrete with 19.4 J of impact energy
- Maintain speed under heavy loads with constant speed electronics
- Efficient performance and runtime with brushless motor and German-engineered apparatus
- Pro-grade versatility: Tackle horizontal and downward drilling for #9 – #14 rebar dowel applications, dry coring up to 6 in., chipping in any lower wall and floor, bushing, and ground rod driving
- Reduced vibration for comfortable grip Active Vibration Control
-
Free Shipping
$811.25
Features
- Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
- Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
- Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode
- Compact and ergonomic design at only 77″ long
- Weighs only 10.6 lbs. with battery for reduced operator fatigue
-
Free Shipping
$525.00
Features
- Variable 2-speed Hammer Driver-Drill with Makita-built brushless motor delivers (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM) and 1,250 in.lbs. of Max Torque
- Electronic digital clutch accurately targets desired torque range (41 settings in low speed, 21 settings in high speed)
- Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the accessory is suddenly forced to stop
- Impact Driver features 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM & 0-1,400/ 0-2,600/ 0-3,600/ 0-4,100 IPM) provides 1,860 in.lbs. of Max Torque
- Tightening Mode (T-mode) for faster tightening of self-drilling screws in thick or thin gauge metal
-
Standard Shipping
$598.75
Features
- Delivers corded performance with cordless convenience
- Compact sanding arm pivots up to 160° for compact storage
- L.E.D. light adjusts to match angle of the sanding arm or shape of the workspace
- Electric brake allows the tool to be repositioned faster for maximum productivity
- Versatile for use in wood and steel applications
-
Free Shipping
$1,043.75
Features
- Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
- Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
- Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode
- Compact and ergonomic design at only 99″ long
- Weighs only 17.2 lbs. with battery for reduced operator fatigue
-
Free Shipping
$336.25
Features
- Quiet Series compressor design at only 58 dB for operator and crew comfort; ideal for indoor use
- Compressor runs at a lower RPM (1,750) resulting in longer motor and pump life
- Complete roll-cage construction provides the compressor with protection to withstand a variety of job-site, transporting, and storage environments
- Oil-free dual-piston pump designed for maintenance-free operation
- Compressor features a lightweight design for increased job site portability, an oil-free dual-piston pump designed for maintenance-free operation, and a cord wrap for convenient AC power cord storage
-
Free Shipping
$565.00
Features
- Powerful motor design drives standard 16 gauge, straight finish nails from 1″ to 2-1/2″ in length
- Compact center height enables viewing around the nose tip when fastening in tight spots
- Anti-dry fire mechanism engineered to help prevent driving blanks and damage to work surface
- Built-in L.E.D. light illuminates the work area
- Reversible belt clip allows the tool to remain close
-
Special Order Shipping
$433.91
Features
- 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Brushless motor maximizes runtime and durability
- Tool-free selectable trigger for sequential or contact actuation modes
- Tool-free depth adjustment for precise countersinking of nails
- Tool-free jam release to quickly and easily clear nail jams
