Showing 161–200 of 796 results
-
Special Order Shipping
$2,460.93
Features:
- 5 times faster than manual tying
- Lightweight and compact body for easy maneuvering and one handed operation
- Li-ion battery can complete 2600 ties per charge
- Ties approximately 120 times per coil.
- Brushless twisting motor
-
Free Shipping
$136.25
Features:
- 3,700rpm motor for fast cutting and ripping
- Precision machined aluminum base
- Excellent cutting capacity
- Ergonomic design
- 3 Year Limited Warranty
-
Free Shipping
$326.25
Features:
- Reach full charge in 40 minutes or less
- Compatible only with Star Protection Computer Controls
- Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
- Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
-
Special Order Shipping
$4,076.97
FEATURES
- REDUCES BACK STRAIN – The RB401T-E is an ergonomic solution for backbreaking slab work.
- ADJUSTABLE HANDLES – Users can adjust the handles to 2 positions, to find the most comfortable fit for their height.
- TRIGGERLESS TECHNOLOGY – An automatic contact mechanism (Pat. Pending) allows the tool to instantly tie when pushed down over a rebar intersection.
- SHORTER TIE HEIGHT (Pat. Pending) – A Wire Bending Mechanism produces a shorter tie height. Less concrete is needed to fully cover a wire tie.
- ENCLOSED DESIGN – Greater protection against debris and moisure entering the tool.
- QUICKLY & EASILY LOAD TIE WIRE – Rapidly load the dual wire coil with the quick load magazine design.
-
SALEÂ 19% OFF
Rated 5.00 out of 5
Free Shipping
$1,193.51 Original price was: $1,193.51.$969.73Current price is: $969.73.
Features:
- 18V 5Ah Battery Fully Charged in 45 Minutes with Dual Port Rapid Charger Included
- Includes 4 Batteries
- Only 13.9lbs and Zero Emissions
- Low maintenance, no gas/oil mixes, no pull starts
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol
- Integrated water delivery system continuously feeds water for OSHA Table 1 Compliance in concrete cutting applications
-
Free Shipping
$2,680.11
The RB518 is a battery operated rebar tying tool that can tie #5 x #5 to #7 x #8 rebar. You will save time, save money and increase productivity with this handy cordless tool. MAX Re-Bar-Tiers are also proven to reduce the risk of developing musculoskeletal diseases.
-
Standard Shipping
$18.99
Features:
- Extreme durability and longer life in general demolition and clearing reinforcements
- Reflective energy collar generates new energy for maximum material removal
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Twist Point design resists jamming for faster chipping and material evacuation
- Self-Sharpening for increased productivity and longer life
- Maximum performance in cordless and corded SDS-Plus and SDS-Max rotary hammers
-
Standard Shipping
$11.49
Features:
- Extreme durability and longer life in concrete
- Ideal for general demolition and clearing reinforcements
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Maximum performance in cordless and corded SDS-Max rotary hammers
-
Standard Shipping
$21.99
Features:
- Extreme durability and longer life in concrete
- Ideal for general demolition work, thin-set removal, cleaning concrete, and removing scale and rust
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Bracing ribs deliver superior stability and rigidity
- Self-Sharpening for increased productivity and longer life
- Maximum performance in cordless and corded SDS-Plus and SDS-Max rotary hammers
-
Standard Shipping
$10.83
Features:
- Extreme durability and longer life in concrete
- Ideal for general demolition and clearing reinforcements
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Maximum performance in cordless and corded SDS-Max rotary hammers
-
Standard Shipping
$11.29
Features:
- Extreme durability and longer life in concrete
- Ideal for general demolition and clearing reinforcements
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Maximum performance in cordless and corded SDS-Max rotary hammers
-
Standard Shipping
$24.99
Features:
- Extreme durability and longer life in concrete
- Ideal for general demolition work, thin-set removal, cleaning concrete, and removing scale and rust
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Wide chisel design for minimal effort and time in concrete removal applications
- Maximum performance in cordless and corded SDS-Max rotary hammers
-
Free Shipping
$1,076.25
Features
- 36V Dual power rotary hammer from 2 18V LXT batteries
- Anti-Vibration Technology for smoother operation
- Dust extraction capability with optional Makita Dust Attachment Kit
- Auto-start Wireless System for bluetooth remote start dust extraction
-
$1,239.00
Features:
- Easier cold starts
- Improved maintenance and efficiency
- Water kit with quick release attachment adaptable to most common hose threads
- Cutting arm easily repositions
- Lower fuel consumption
-
Free Shipping
$2,999.99
Features:
- Honda GX120 3.5HP w/diaphragm carburetor
- Dual Air Filtration
- Integrated Roller and Lift Handle
- Protective Roll Cage
- Includes Transport Dolly
-
Standard Shipping
$14.60
Features:
- High performance carbide for greater durability and cutting performance in metals with a thickness from 3/16″ to 9/16″
- Enhanced carbide tip to blade connection for extreme impact resistance
- 1 inch oversized blade body for straighter cuts with less vibration
-
Standard Shipping
$11.30
Features:
- A one-of-a-kind tip design enables faster and easier plunging
- Hardened cutting edge for long and durable cutting life
- Not recommended for cutting wood with nails
-
Standard Shipping
$16.99
Features:
- Full Contact Arched Design provides more working teeth within the material for faster cuts in fewer passes
- Dual Tooth design with small gullets for faster material removal and extra durability.
- Perma-shield coating protects the blade from heat, gumming, and corrosion
- 1in Demolition body for straighter cuts with less vibration.
-
Free Shipping
$429.99
Features
- Powerful 10 AMP motor delivers 4.6 ft.lbs. of impact energy to handle the most demanding applications
- 2-mode operation for “Hammering Only” or “Hammering with Rotation”
- Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
- Rubberized ergonomic soft grip provides more comfort
- “No hammering when idling” functions helps increase tool life
-
Standard Shipping
$109.99
Features
- DW08302CG features a Green beam for increased visibility
- 120 ft. range
- 1/8 in. accuracy at 30 ft.
- Water and debris resistant with an IP54 rating
- 1 meter drop rating
-
Free Shipping
$589.99
Features
- Dewalt DCS374P2 features LED Work Light with 20 second delay illuminates dark work surfaces for accurate cutting.
- Tool less blade changing lever loosens blade tension for easy blade changes
- Variable Speed for versatility and control
- DEWALT built brushless motor for performance and durability
- 5″ Cutting Capacity
-
Free Shipping
$434.99
Features
- Keyless lever-action blade clamp for quick and easy blade changes
- Variable-speed trigger allows user to instantly control speed
- Pivoting shoe provides leverage for different applications
- LED helps illuminate dark jobsite work areas
- Rubber overmold grip for comfort
-
Free Shipping
$449.00
Features
- Dewalt DCF900P2 features a Battery Guard
- On tool LED light
- 030 ft-lbs of max fastening torque and 1400 ft-lbs of max breakaway torque.
- 4-mode speed settings and variable speed trigger.
- Precession Wrench Control
-
Free Shipping
$349.56
Features
- The Dewalt DCN623D1 unit works with 23 Ga. pin nails from 5/8″ up to 1-1/2 in. in length
- tool-free jam release and tool-free depth adjust
- Low nail lockout system with LED indicator to inform user when it’s time to reload
- Drives 2,000 nails on average per charge
-
Free Shipping
$222.21
Features
- The Dewalt DCF850E1 includes a Compact impact driver, under 4 in. design for optimized ergonomics and access to difficult-to-reach spots
- Delivers 1,825 in-lbs of torque and 3,250 RPM to drive large diameter screws
- Enabled by variable 3-speed trigger
- Integrated 3-LED work light enhances visibility in dimly lit spaces
-
Free Shipping
$422.82
Features
- The Dewalt DCK265D2 has a Brushless motor for efficient performance and runtime
- Wide variable speed range with dedicated High and Low settings helps optimize usage in light- and heavy-gauge substrates
- Four dedicated tool modes enable operation of tool in Trigger Mode (High Speed), Trigger Mode (Low Speed), PushStart Mode, and Lock-On Mode
- Top-mounted electronic mode select enables fast, one-handed switching between the tool’s four modes
- Tool-free bit change enables fast bit changes without the need for a wrench
-
Free Shipping
$285.81
Features
- The Dewalt DCK279C2 includes the DCD709 hammer drill/driver, compact at only 6.9 in. front to back designed to fit in tight spaces
- DCD709 hammer drill/driver is lightweight at only 2.5 lbs.
- DCF809 Impact Driver is only 5.1 in. in length to fit in tight spaces.
- DCF809 Impact Driver has 1700 in-lbs of torque delivering the power you need to get a majority of applications done
- DCF809 Impact Driver is lightweight at only 2.1 lbs.
-
$714.98
Features
- Work in tight spaces with the lightweight, compact 7-1/2 in. Drill/Driver and 5-2/5 in. Cordless Impact Driver included in the Dewalt DCKSS676D2
- Brighten dark work areas: DCD777 Cordless Drill/Driver features an LED work light with 20-second trigger-release delay for enhanced visibility
- Professional speed and application control with DCF787 Cordless Impact Driver”s variable speed trigger for precision on delicate work surfaces
- Quick bevel adjustments: Brushless Circular Saw bevel shifts from 0 – 50° with a tool-free lever
- Quickly change blades and attachments without wrenches using the DCS356 Quick Change accessory system
-
Free Shipping
$522.46
Features
- Dewalt DCE400D2 Expands 3/8 in. – 1 in. Pex Type-A tubing
- Automatic rotating head action for even expansion
- Full trigger actuation for use in tight spaces
- Bright LED work light to help illuminate dark areas
- Uses DEWALT® PEX Heads. Compatible with Milwaukee® and Uponor® Heads. (Milwaukee® is a registered trademark of Milwaukee Electric Tool Corp. Uponor® is a registered trademark of Uponor Oyj.)
-
Special Order Shipping
$542.38
Features
- Dewalt DCD460T2 60V Max brushless motor for increase power and runtime
- Power of a cord with cordless freedom
- Adjustable bail handle and 2-position side handle for leverage and control
- 2 variable speed ranges (0-300 / 0-1250 rpm) to match appropriate speed to the application
- Metal-gear housing for jobsite durability and increased reliability
-
Free Shipping
$232.68
Features
- Complete challenging projects with up to 40% more with the Dewalt DCD800P1 vs. the DCD791B using DCB205 battery (sold separately)
- Access hard to reach work areas: Compact 6.37 in. size is 1/2 in. shorter in length compared to the DCD791, tool head only.
- High bit retention with 1/2 in. metal ratcheting chuck
- Pro-level speed, control and precession: High-speed transmission with variable trigger and 2 speed settings (0-650/0-2,000 rpm)
- Brighten dark work areas: Adjustable 3-Position, 3 Mode LED with up to 70 Lumens, including LED spotlight mode which features a 20-minute shutoff function for extended work time in low-light spaces
-
Free Shipping
$155.07
Features
- The Dewalt DCD793D1 is over 2in. shorter in length at 6.38 in. (tool head length only) to tackle tough jobs.
- Get up to 16% more power with 404 UWO and up to 1,650 RPMs no load for a variety of drilling applications.
- High bit retention with 1/2 in. ratcheting chuck
- Illuminate workspaces using the on-tool LED work light
-
Free Shipping
$640.00
Features
- Dewalt DCG460X2 3,000 MWO Brushless Motor – Brushless Motor Motor Producing 3,000 MWO Delivers Incredible Power for Extreme Applications
- Kickback Brake – Kickback Brake engages when a pinch, stall, or bind-up event is sensed
- E-Clutch – E-Clutch proactively stalls motor when tool is under too much load
- WTC – Wireless Tool Control enables connectivity to WTC enabled Vacuums
- Chip-Ready – Tool Connect Integrated Chip Pocket
-
Free Shipping
$327.53
Features
- Dewalt DCF500GG1 brushless motor delivers 50 ft-lbs of max torque and a no-load speed of 0-450 RPM
- Interchangeable anvil design provides the ability to quickly swap between 3/8″ square drive, and 1/4″ square drive, and 1/4″ quick change hex
- Oil resistant glass filled nylon tool housing resists effects of harsh automotive oils and solvents
-
Free Shipping
$395.53
Features
- DEWALT DCF510GE1 brushless motor delivers 75 ft-lbs of max torque and a no-load speed of 0-300 RPM
- Interchangeable anvil design provides the ability to quickly swap between 3/8″ and 1/2″ square drives
- Oil-resistant glass-filled nylon tool housing resists effects of harsh automotive oils and solvents
-
Free Shipping
$863.75
Features
- The Makita GT401M1D1 combo kit Variable 2-speed Hammer Driver-Drill with Makita-built brushless motor delivers (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM) and 1,250 in.lbs. of Max Torque
- Impact Driver features 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-4,400 IPM) provides 1,950 in.lbs. of Max Torque
- Recipro Saw delivers 0-2,300 (Low) & 0-3,000 (High) strokes per minute and a 1-1/4″ stroke length for faster cutting
- High-luminance 4 L.E.D. flashlight provides 160 lumens
- The Makita GT401M1D1XPT is engineered to provide increased dust and water resistance in harsh job site conditions
-
Free Shipping
$484.00
Features
- The Makita XLC09R1B brushless motor runs cooler and more efficiently; delivering up to 125 Watts of power
- Push button 4-speed power selection (max/high/normal/quiet) for efficient operation
- Up to 23 minutes of continuous use in quiet mode from a single fully charged 18V 2.0Ah LXT® battery
- Bagless cloth filtration system allows for easier cleaning and quicker debris disposal
- Compact and ergonomic design for operator comfort
-
Free Shipping
$484.00
Features
- Makita XLC10R1W brushless motor runs cooler and more efficiently; delivers up to 42 CFM
- Push button 4-speed power selection (max/high/normal/quiet) for efficient operation
- Up to 27 minutes of continuous use in quiet mode from a single fully charged 18V Compact 2.0Ah LXT® battery; optional 5.0Ah battery delivers up to 69 minutes of continuous use
- Accepts disposable paper or reusable cloth dust bags for added convenience
- Compact and ergonomic design for operator comfort
-
Free Shipping
$1,585.53
Features
- TheDewalt DCH911Z2 brushless motor delivers 27 Joules of Impact Energy for fast chipping of concrete
- Rear handle design allows for Comfortable Operation In horizontal and downward chipping
- Wireless tool control technology enables the user to link the tool to the DCV585 60-Volt MAX dust extractor (sold separately) for remote extractor activation
- This cordless chipping hammer comes Tag Ready so individuals and companies can attach a DEWALT Tag (sold separately) to track its location via the DEWALT Tool Connect app
- The integrated SHOCKS Active Vibration Control system is designed to minimize vibration felt at the handles compared to chipping hammers without this feature
-
Free Shipping
$260.00
Features
- The Makita GA4591 Powerful 15 AMP motor delivers more output and variable (2,800 – 11,500) RPM
- SJSâ„¢II provides a leaf spring and cam gear drive mechanism that is engineered to reduce vibration for increased operator comfort during extended use
- Vibration absorbing side handle provides increased comfort on the job
- Mechanical brake stops the wheel in under 2.5 seconds
- Electronic controller provides constant speed control which automatically applies additional power to the motor to maintain speed under load