Power Tools
Showing 81–120 of 1177 resultsSorted by popularity
-
Tsurumi 50TMA2.4S Auto Corrosion-Resistant Titanium Submersible Pump for Saltwater Applications [115V]
$1,722.99Features
- 50TMA2.4S is corrosion resistant
- Bore: 2″/50mm
- Solids DIA.: 0.394″/10mm
- Viscosity: 1.123cSt.
- Phase: 1
-
DeWalt DW22812 Impact Socket Set, Saw, 1/2-Inch, 10-Piece
$55.99Features
- Includes 8 most common size sockets & 2-1/4″ adapters
-
TA551B/16-11 Max 16ga Medium Crown Stapler
$341.06From sheathing, subflooring, roof decking, pallets, vinyl siding, and more, the safety equipped SuperStapler is an extremely versatile and lightweight medium crown stapler, weighing only 5.5 lbs. Built with an array of safety and efficient mechanisms, makes this stapler an ideal choice for any jobsite. Designed with a 3-tooth driver blade safeguards from jamming by…
-
MAX CN445R3 SuperRoofer Roofing Coil Nailer up to 1-3/4in
$289.56Features:
- Risk Free Purchase – MAX 30 Day Contractor Promise
- Tar Resistant Nose
- Full Round Head Driver Blade
- Nose Magnet To Prevent Waste
-
HR4013C 1‑9/16″ SDS‑MAX AVT Rotary Hammer
$885.99Features:
- Air Actuated Counterbalance System
- Vibration Absorbing Housing
- Powerful 11 Amp Motor Delivers 8.4ft/lbs of impact energy
- Variable Speed Dial
- Soft Start and Soft No Load functions
-
HM1812X3 70 lb. Advanced AVT Breaker Hammer, accepts 1‑1/8″ Hex bits
$2,439.00Features
- 15 AMP breaker hammer motor which delivers 53.9 ft.lbs./72.8 joules of impact energy
- Advanced AVT® Vibration Reduction Technology
- L.E.D. service light notifies the user approximately 8 hours before brushes need to be replaced
-
Diablo DS0620CF 6″ Carbide Reciprocating Blades for Thin Metal Cutting
$9.64Features:
- High performance carbide for greater durability and cutting performance in thin metal
- Solid carbide creates full barrier to heat resistance for maximum durability
- Carbide strip teeth are milled to perfection for smoother quality cuts
-
DeWalt DW5447 5/8 in. x 10 in. x 12 in. Rock Carbide Drill Bit
$19.99Features
- Rock carbide tip for longer bit life
- Elongated four flute helix for faster material removal
- Increased steel prevents breakage
- For use with electric or cordless rotary hammers
-
6% OFF
DeWalt DWAPXPIR Impact Connect PEX Pinch Clamp Attachment
Original price was: $146.99.$138.17Current price is: $138.17.Features
- Promote productivity with this attachment that delivers 6X faster clamps without the hassle of a hand tool
- Limit fatigue with this PEX pincher that requires less work to finish the job
- Attach in seconds to go from driving screws to clamping pipe
- Works with select DEWALT 20V MAX* and other pro-grade 18V impact drivers
-
Multiquip ST2047 Compact Submersible Centrifugal Pump
$559.99Features
- 1.0HP, 115V/9.8A, 1Ø, UL & CUL Listed Electric Motor.
- Built-in Overload Protection.
- 2” (NPT) Female Discharge Port.
- Reliable double mechanical oil-filled seals.
- Cast iron/steel motor casing serves as heat conductor.
- Check out the pump(s) guide here
-
B-80014 50′ High Pressure Hose with Fittings
$223.99Features
- Up to 2X less weight than heavier hoses
- Highly flexible and less kinks for easy rolling
- More durable than vinyl hoses
- Includes fittings
- For high pressure compressors and nailers
-
Dewalt DCH263R2 20V MAX* XR® Brushless 1-1/8 in. SDS Plus D-Handle Rotary Hammer Kit
$617.99Features
- 3.0 joules of impact energy provides corded power without the cord.
- Optimized ergonomic design provides excellent control in all orientations
- Durable three mode German engineered mechanism
- Wide optimal drilling range between 1/4 in. and 3/4 in.
- Factory-set clutch reduces sudden, high-torque reactions if bit jams.
- Optimized ergonomic design provides an exceptional drilling and chipping experience in overhead, horizontal and downward orientations.
- Constant speed under load for fast speed of application
-
Metabo HPT NR3675DD MultiVolt 36V 3-1/2in 21 deg Cordless Duplex Nailer
$699.99Features:
- 2 nails per second (16D / 8D / 6D)
- 900 nails per charge (w/ 36V 2.5Ah MultiVolt battery)
- Pneumatic-like feel with no gas, no hose, no compressor and zero ramp-up time
- Compatible with Duplex fasteners: 50214-6D: 2-1/4 x .131, 50234-8D: 2-3/4 x .131, 50312-16D: 3-1/2 x .131
-
CN80 Max Heavy Duty Coil Nailer up to 3-1/4″
$383.75The MAX CN80 is a safety equipped, lightweight yet heavy duty professional grade industrial coil nailer. Its die cast aluminum construction contributes to its lightweight. The CN80 is best used for industrial applications such as making pallets, crating, packaging, fences, decking, sheathing, furring, and siding.
-
MAX CN55 Coil Pallet Nailer up to 2-1/4 inches
$319.66Features:
- Risk Free Purchase – MAX 30 Day Contractor Promise
- Rapid Fire Trigger
- 350 Nail Capacity
- Easy Twist Air Deflector
-
Bartell B446 46″ Concrete Power Walk Behind Trowel
$0.00ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
-
Diablo DS1205FG 12″ 5 TPI Pruning Reciprocating Saw Blade
$5.17Features:
- Hardened cutting edge for long and durable cutting life
- Deep-seated gullets for easy chip removal and fast cutting
- Bi-Directional tooth design for fast and smooth cutting in both directions
Minimum order quantity: 5Order in multiples of: 5 -
Multiquip SW1A 120V Single Float Switch w/ Piggy-Back Plug Receptacle
$99.99Features
- Mechanical single float switch
- NEMA 5-15 Plug and piggy-back receptacle end
- Corrosion resistant PVC Housing
- Temperatures to 140 degrees
- Adjustable range from 7 to 36 inches
-
12% OFF
![DeWalt DCF870E1 20V Max XR Power Stack 1/4 in. Quiet Hydraulic Impact Driver Kit [1.7 Ah] product image](https://www.heydensupply.com/wp-content/uploads/2024/10/6d216c0bf4e0c51ee98a38d9aad9dba3ab34fa3c-600x600.jpg "6d216c0bf4e0c51ee98a38d9aad9dba3ab34fa3c")
DeWalt DCF870B 20V Max XR 1/4 in. Quiet Hydraulic Impact Driver
Original price was: $241.99.$212.95Current price is: $212.95.Features
- Reduce noise disturbances with up to 57% quieter operation.
- Industry’s highest rated max torque hydraulic impact driver
- DCF870B provides up to 40% faster driving – drive large screws quickly and finish jobs fast
- Provides consistent performance in demanding applications and performs in cold temperatures
- Complete framing, cabinetry, and other applications in tight areas with an ergonomic design
-
Dewalt DW08302CG NG Green 3 Spot Laser
Features
- DW08302CG features a Green beam for increased visibility
- 120 ft. range
- 1/8 in. accuracy at 30 ft.
- Water and debris resistant with an IP54 rating
- 1 meter drop rating
-
Dewalt DCH775X2 60V MAX 2 in. Brushless Cordless SDS MAX Combination Rotary Hammer Kit
$1,299.00Features
- Dewalt DCH775X2 offers rapid drilling and chipping in hard concrete with 19.4 J of impact energy
- Maintain speed under heavy loads with constant speed electronics
- Efficient performance and runtime with brushless motor and German-engineered apparatus
- Pro-grade versatility: Tackle horizontal and downward drilling for #9 – #14 rebar dowel applications, dry coring up to 6 in., chipping in any lower wall and floor, bushing, and ground rod driving
- Reduced vibration for comfortable grip Active Vibration Control
-
![[Tool Only] Dewalt DCD130B 60V MAX Cordless Mixer/Drill With E-Clutch System product image](https://www.heydensupply.com/wp-content/uploads/2023/03/226b2892-8b8d-40c2-8dbf-566bd38467b6_7-600x600.jpg)
[Tool Only] Dewalt DCD130B 60V MAX Cordless Mixer/Drill With E-Clutch System
Features
- Mix up to 19 premixed drywall buckets (4.5 gal) on a single charge using DCB606 Flexvolt battery (6Ah).
- Mix up to 17 buckets of tile mortar (5 gal) on a single charge using DCB606 Flexvolt battery (6Ah)
- Mix up to 9 buckets of concrete (4.5 gal) on a single charge using DCB606 Flexvolt battery (6Ah)
- Integrated E-Clutch® System helps to improve user control.
- 3-Position side handle allows for optimum position while mixing.
-
24% OFF
[Tool Only] Dewalt DCE512B 20V MAX Cordless Jobsite Fan
Original price was: $160.99.$121.97Current price is: $121.97.Features
- IP 54 Rated
- Powerful Upgraded Motor to Provide Up To 650 CFM
- Multiple hanging options – freestanding, hang hooks, and wall mount
- Wide-Range, Variable Speed Control
- Up to 4.5 Hours runtime on MAX airspeed (using a DEWALT 5.0Ah Battery)
-
14% OFF
XWT15Z 18V LXT Brushless Cordless 4‑Speed 1/2in Sq. Drive Impact Wrench w/ Detent Anvil Tool Only
Features
- Makita XWT15Z features 240 ft.lbs. of Fastening Torque and 430 ft.lbs. of Nut-Busting Torque
- 3 forward and 3 reverse Auto-Stop modes
- 4-speed power selection
- Weighs only 4.0 lbs. with battery
- Tool Only
-
E-02515 9in Diamond Blade Segmented General Purpose
$45.79Features
- Taller 13mm segments are designed for longer life and faster cutting
- Up to 4x longer life than competitive blades
- For cutting concrete, block, brick, pavers, and roof tiles
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting diamond blade
- Made with high quality diamonds
- For smoother and finer cuts in masonry products
- For use with angle grinders or masonry saws
-
Max KH100FT High Pressure Air Hose 100ft
$116.10Features
- Tough, excellent strength of maximum working pressure 500 PSI
- Rubber/PVC blend construction
- Very flexible even in sub-zero temperatures
- 100-Feet x 3/8-Inch
- Solid brass connectors never corrode and give a better seal
- Abrasion-resistant outer cover
-
Max HN120 Powerlite High Pressure Concrete Pinner to 2-1/2in 500psi
$1,155.81Features
- Safer than conventional concrete pinn
- Drives .307″ head pins into concrete or steel with 2,231 inch lbs. driving force.
- Only 6.4lbs-this lightweight tool has less recoil than P.A.T tools.
- Self-cleaning filter for reliable operations
-
Dewalt DW5466 1in x 16in x 18in Rock Carbide SDS plus Hammer Bit
$39.99Features
- Rock carbide tip for longer bit life
- Elongated four flute helix for faster material removal
- Increased steel prevents breakage
- For use with electric or cordless rotary hammers
-
Bostitch MCN250 35 Degree Metal Connector Framing Nailer STRAPSHOT
Features
- Exposed nail tip places fastener point directly into connector holes for a fast and precise application
- In-line magazine offers balance for maneuverability
- Adjustable rafter hook allows user to hang tool on rafters and joists
- Exclusive nail management feature helps to prevent jamming (patent pending)
- Drives 1-1/2″ and 2-1/2″ STRAPSHOT™ fasteners as well as other paper tape collated metal connector nails
-
Dewalt DCL045B 12V/20V MAX Cordless Hood Light
$159.99Features
- JOB-SPECIFIC ADJUSTABILITY: Change length from 51 in. to 74 in. as you extend and rotate padded hooks 360° to fit most SUV/truck hoods
- PROTECTS SUV/TRUCK SURFACE: Anti-marring hooks designed to keep from scratching your vehicle’s paint
- VERSATILE COMPATIBILITY: Works with all 12V MAX/20V MAX/60V MAX batteries (excluding DCB615)
- FULL CONTROL of light with high, low, and single-arm modes
- EASY TRANSPORT and storage with foldable design
-
-
13313 Marshalltown Shockwave Throttle Cable and Lever
$23.34Features
- Replacement for discontinued part #13312
- 13313 is specifically for Shockwave Power Screeds
- Maintain smooth throttle control for reliable performance
-
M7345 Marshalltown edger blade 6 X 14
$24.09EDGER BLADE, 6 X 14
Minimum order quantity: 4Order in multiples of: 4 -
M7636 Marshalltown finish bld-master P.T. 36in
$20.01FINISH BLD -MASTER P.T. 36in
Minimum order quantity: 4Order in multiples of: 4 -
A4172 Marshalltown 10X14 float blade
$28.5210X14 FLOAT BLADE
Minimum order quantity: 4Order in multiples of: 4 -
M7367 Marshalltown power trowel blade-6 X 16 finish
$30.54POWER TROWEL BLADE-6 X 16 FINISH
Minimum order quantity: 4Order in multiples of: 4 -
M6092 Marshalltown 8X14 comb blade
$29.628X14 COMB BLADE
Minimum order quantity: 4Order in multiples of: 4 -
-
M7342ELG Marshalltown power trowel blade-8 X 14 flat finish GOLD
$36.84POWER TROWEL BLADE-8 X 14 FLAT FINISH GOLD
Minimum order quantity: 4Order in multiples of: 4 -
M7414ELG Marshalltown power trowel blade-8 X 16 comb
$37.16POWER TROWEL BLADE-8 X 16 COMB
Minimum order quantity: 4Order in multiples of: 4
