View cart “Max CP-C832W7-SF 1-1/4×0.142in PowerLite High Pressure Smooth Shank Concrete Pin” has been added to your cart.
Showing 41–80 of 213 results
-
Standard Shipping
$26.19
Features
- Use with Outdoor Accents decorative hardware and STN22 hex-head washer for an appealing look
- Use Outdoor Accents structural screw without the washer as a wood-to-wood fastener
- Deep 6-lobe T40 recess provides easy, secure driving (T40 drive bit included in multi-count packages)
- Patented SawTooth® point (3 1/2″ and 5 1/2″ screws only) ensures fast starts, reduces installation torque and eliminates the need for predrilling in most applications; Type-17 point on 2″ screw ensures fast starts
- Black double-barrier coating offers premium look while providing a medium level of corrosion protection for many outdoor applications
-
Standard Shipping
$64.55
Features:
- Uses Strong-Drive screws, which allow for fast installation, reduced reveal and high capacity
- Provides a 1-in. standoff between post and concrete that meets code requirements
- Embeds in wet concrete at time of pour
- The standoff base reduces the potential for decay at post and column ends
- Shipped with base plate assembled
-
Standard Shipping
$95.59
Outdoor Accents gable plates add decorative appeal and strength to any outdoor living space. They provide reinforcement for a connection from a wood beam to three angled wood braces. Three sizes are available: 6:12 pitch, 8:12 pitch and 12:12 pitch. Gable plates are easily installed with Outdoor Accents structural screws and hex-head washers.
-
Standard Shipping
$95.59
Features
- Gable plates are easily installed with Outdoor Accents structural screws and hex-head washers (fasteners sold separately)
-
Standard Shipping
$124.29
Features
- Certified welds for confidence in strength and loading
- Uplift loads increased for earthquake or wind loading
- Bolt spacing that meets NDS code requirements to ensure optimal performance
- Diamond holes to provide temporary fastening
-
Standard Shipping
$15.19
Features
- Combined with the Outdoor Accents structural wood screw (SDWSDBB), it provides a structural load-rated solution
- Easy to install
- Code listed in IAPMO-UES ER-192
-
Special Order Shipping
$977.35
Features
- Drives into concrete and steel substrates for application versatility
- Adjustable power settings for application versatility
- Automatic piston return and load advancement for fast application speed
- Tool-free disassembly for easy, onsite cleaning and serviceability
-
-
Standard Shipping
$7.69
Features:
- Features double-shear nailing which distributes the load through two points on each joist nail for greater strength
- Allows for the use of fewer nails, faster installation, and the use of standard nails for all connections
- Do not bend or remove tabs
- Nominal joist size: 4×8
- Made from 14-gauge steel
-
Standard Shipping
$29.10
Features:
- Extra optional triangle holes for additional load
- HUC-series hangers are tested, load rated and code compliant
- Install wood joists to wood, masonry and concrete
- Seat width: 3-1/8 in.
- Nominal joist Size: Double 2×10
-
Standard Shipping
$84.56
Features:
- Type-17 point enables easy driving with no predrilling and minimal wood splitting
- 3/8-in. hex head with 0.48-in. integrated washer
- Head is stamped with the Simpson Strong-Tie — sign and fastener length for easy identification after installation
- Serrated threads
- Replacement driver bit model BITHEXR38-134 (not included)
-
Standard Shipping
$62.80
Features
- Pins for Concrete and Concrete Masonry (CMU)
- Gas Fasteners
- Code compliant with the 2018 IBC/IRC, 2015 IBC/IRC, 2012 IBC/IRC, and 2009 IBC/IRC
- Tested in accordance with ASTM E1190 and ICC-ES AC70 for use in concrete, CMU block and steel
-
Standard Shipping
$15.49
[Pack of 100] DeWalt 50100-PWR .300 Head Drive Pin 3 In W-7/8 In Washer Drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in…
-
Standard Shipping
$13.39
[Pack of 100] DeWalt 50098-PWR 300 Head Drive Pin 2 1/2 W-7/8 Washer Drive pins with a .300″ head by Powers Fasteners have a specially designed point that allows it to properly penetrate into typical base materials for the purpose of permanently fastening a fixture to concrete, concrete block and structural steel. A plastic flute…
-
Standard Shipping
$13.79
[Pack of 100] DeWalt .300 Head Drive Pin 2In w-7/8In Washer 50096-PWR drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in various lengths….
-
Standard Shipping
$6.79
[Pack of 100] DeWalt .300 Head Drive Pin 1 1/2 In 50034-PWR drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in various lengths….
-
Standard Shipping
$12.75
Features
- Drive pins with a 0.300″ diameter head
- Plastic flute is mounted on the pin shank
- Fastening a fixture to concrete, concrete over steel deck, concrete masonry walls
- The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.
-
Standard Shipping
$11.50
h3>[Pack of 100] DeWalt 50026-PWR .300 Head Drive Pin 1In. Drive pins with a .300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured with a 0.143″ diameter shank in various lengths. Knurled shank designs are available to increase performance in…
-
Standard Shipping
$12.50
[Pack of 100] DeWalt 50022-PWR Powers Fasteners 3/4″ Standard Drive Pins .300 Head Drive pins with a .300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured with a 0.143″ diameter shank in various lengths. Knurled shank designs are available to…
-
Standard Shipping
$12.50
[Pack of 100] DeWalt 50012-PWR Powers Fasteners 50012-PWR 1/2″ Standard Drive Pins .300 Head Drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in…
-
Standard Shipping
$45.58
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
Standard Shipping
$12.17
Features
- High quality powder loads, designed for consistently and reliability
- Specific load types are designed for each caliber powder actuated tool
- They are offered as single cartridge units for single shot tools and also collated in groups of 10 into plastic strips for semi-automatic tools
- Manufactured by DEWALT
-
Standard Shipping
$12.99
Features
- General purpose anchoring
- 02820-PWR installs in a variety of base materials
- Roof Flashing
- Mechanical Attachments
-
Standard Shipping
$10.99
Features
- General purpose anchoring
- 02814-PWR installs in a variety of base materials
- Roof Flashing
- Mechanical Attachments
-
Standard Shipping
$47.96
Features
- 03797-PWR offer a Pre-expanded anchor design which allows for easy installation
- Mushroom and flat head Spike anchors are tamper-proof
- Forming Spike, which is removable, can be used for temporary installations
- Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
-
Standard Shipping
$25.59
Features
- 05523-PWR offers a pre-expanded anchor design allowing for easy installation
- Mushroom and flat head Spike anchors are tamper-proof
- Forming Spike, which is removable, can be used for temporary installations
- Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
-
-
Standard Shipping
$59.99
Features
- 03794-PWR offers a pre-expanded anchor design, which allows for easy installation
- Mushroom and flat head Spike anchors are tamper-proof
- Forming Spike, which is removable, can be used for temporary installations
- Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
-
Standard Shipping
$19.15
Features
- DFM12724B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
-
Standard Shipping
$12.99
Features
- DFM12724 is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
Standard Shipping
$14.20
Features
- DFM12722B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
-
Standard Shipping
$10.29
Features
- DFM12722 is available in several head styles
-
Standard Shipping
$22.80
Features
- DFM12726B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
-
Standard Shipping
$14.99
Features
- DFM12726 is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
Standard Shipping
$19.95
Features
- DFM12728B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
-
Standard Shipping
$18.99
Features
- DFM12728 is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
Standard Shipping
$14.49
Features
- DFM12720B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
Standard Shipping
$10.99
Features
- DFM12720 is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
Standard Shipping
$5.79
Features:
- Extra-long straps for height adjustability and top-flange installation
- Zinc Galvanized, G90 Finish
- Top-flange or face-mount installation
-
Standard Shipping
$9.49
Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design