Showing 121–160 of 196 results
-
Standard Shipping
$95.59
Outdoor Accents gable plates add decorative appeal and strength to any outdoor living space. They provide reinforcement for a connection from a wood beam to three angled wood braces. Three sizes are available: 6:12 pitch, 8:12 pitch and 12:12 pitch. Gable plates are easily installed with Outdoor Accents structural screws and hex-head washers.
-
Standard Shipping
$10.59
Features
- Use with Outdoor Accents decorative hardware and STN22 hex-head washer for an appealing look
- Use Outdoor Accents structural screw without the washer as a wood-to-wood fastener
- Deep 6-lobe T40 recess provides easy, secure driving
- Patented SawTooth® point (3 1/2″ and 5 1/2″ screws only) ensures fast starts, reduces installation torque and eliminates the need for predrilling in most applications; Type-17 point on 2″ screw ensures fast starts
- Black double-barrier coating offers premium look while providing a medium level of corrosion protection for many outdoor applications
-
Standard Shipping
$24.49
Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APVBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-
Standard Shipping
$3.39
Features
- Designed to fit a nominal 4×4 or 6×6 wood post
- Decorative, square design
- Provides moisture protection
-
Standard Shipping
$9.49
Features
- Adds decorative flair to any outdoor living project
- Installs with the Outdoor Accents structural screw and hex-head washer (fasteners sold separately)
- Sized to fit 4x and 6x lumber
-
Special Order Shipping
$1,107.83
Features
- The Dewalt DFD270MK drives into concrete and steel substrates for application versatility
- Adjustable power settings for application versatility
- Automatic piston return and load advancement for fast application speed
- Magazine for driving collated fasteners
- Tool-free disassembly for easy, onsite cleaning and serviceability
-
Standard Shipping
$12.27
Features
- Opposing flanges provide increased lateral resistance
- Attains full allowable load using either common nail or pneumatic nail sizes
- Light-gauge material designed for light-duty applications
-
Standard Shipping
$41.19
Features
- Preinstallation of brackets allows rails to slide into place easily
- Eliminates need for toe nails or screws
-
Standard Shipping
$107.39
Features
- Certified welds for confidence in strength and loading
- Uplift loads increased for earthquake or wind loading
- Bolt spacing that meets NDS code requirements to ensure optimal performance
- Diamond holes to provide temporary fastening
-
![BCS2-3[6Z]](https://www.heydensupply.com/wp-content/uploads/2023/01/872d25a7023135625e1d597aeef47f156670f1aa-600x600.jpg)
Standard Shipping
$15.99
Features
- Opposing flanges provide increased lateral resistance
- Double-shear nailing for optimal strength
- Sized specifically for multi-2x widths
-
Standard Shipping
$41.19
Features
- Preinstallation of brackets allows rails to slide into place easily
- Eliminates need for toe nails or screws
-
Standard Shipping
$3.39
Features
- 14 gauge
- ZMAX galvanized with black powder coat
-
Standard Shipping
$20.99
The BC post cap is designed to connect a beam to a post. The 18-gauge material of this post cap makes it ideal for light-duty connections. The BC provides uplift and lateral resistance and includes sizes for both nominal and rough lumber.
-
![ALPH24[100PCK]](https://www.heydensupply.com/wp-content/uploads/2023/01/90ec33b43f7cfeea2805b3a4cefaa11c56780597-600x600.jpg)
Standard Shipping
$40.29
Features
- 14 gauge
- ZMAX galvanized with black powder coat
-
Standard Shipping
$1.45
Features
- Cannot be modified
- Works for a wide range of applications
- Features speed prongs used to temporarily position and secure the connector for easier and faster installation
- LUS-series hangers are tested, load rated and code compliant
-
Standard Shipping
$2.74
Features
- Forms part of a continuous load path to resist wind and seismic forces
- The H10A-2 model holds a double-ply member and is approved for installation with the Strong-Drive® SD Connector screw
- The H10AR model is designed for rough lumber sizes
-
Standard Shipping
$1.19
Features
- Cannot be modified
- Works for a wide range of applications
- Features speed prongs used to temporarily position and secure the connector for easier and faster installation
- LUS-series hangers are tested, load rated and code compliant
-
Standard Shipping
$124.34
Features
- Certified welds for confidence in strength and loading
- Uplift loads increased for earthquake or wind loading
- Bolt spacing that meets NDS code requirements to ensure optimal performance
- Diamond holes to provide temporary fastening
-
Standard Shipping
$161.69
Features
- Certified welds for confidence in strength and loading
- Uplift loads increased for earthquake or wind loading
- Bolt spacing that meets NDS code requirements to ensure optimal performance
- Diamond holes to provide temporary fastening
-
Standard Shipping
$139.08
Features:
- Can be used where quick-to-install posts are needed, including fencing and mailbox applications
- Black powder-coated steel construction for reliable strength and decorative finish
- Approved for installation with the Strong-Drive SDS Connector screw
-
Standard Shipping
$24.99
Features
- Allows easy installation of 4×4 wood posts on existing concrete
- Black powder-coated steel construction for reliable strength and decorative finish
- Approved for installation with the Strong-Drive® SDS Connector screw
-
Standard Shipping
$15.99
Features
- Allows easy repair of rotted or damaged wood posts installed in concrete or dirt
- Black powder-coated steel construction for reliable strength and decorative finish
- Approved for installation with the Strong-Drive® SD Connector screw
- Reinforces weakened wood posts without having to replace the post or the concrete
-
Standard Shipping
$132.72
Features:
- Redesigned tip and thread pattern provides easy starts and up to 25% less torque while driving makes for up to 20% faster driving
- Less installation torque also means less wear on tools
- Deep 6-lobed recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs
- The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks
- WSV screws can be easily backed out, allowing for future access to floor cavities
-
Standard Shipping
$13.95
Features:
- Provides a positive connection for a post to a wood deck
- Stronger than angled nailing or screw fastening
- Reduces the chance of the post splitting and eliminates nailing into end grain
- Not recommended for non top-supported installations (such as fences or unbraced carports)
- Nominal post size: 4×6
-
Standard Shipping
$4.20
Features:
- A versatile, heavy-duty strap for a variety of connections and splices where extra strength is needed
- Straight lines and chamfered edges offer a better appearance
- Provides support in home repair and construction projects
- Easy nailing pattern for connecting the sides of 2x members
- Width: 1-3/8 in.
-
Standard Shipping
$13.41
Features:
- SUL = skewed left
- Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist
- These hangers cannot be modified but will accommodate a 40 degree to 50 degree skewed joist
- Available with the acute flange turned in to accommodate end-of-wall installation for solid sawn sizes only (SURC or SULC)
- Nominal joist size: 2×6 or 2×8
-
Free Shipping
$308.77
Features:
- Flat head
- Unique box thread design with raised-ridge technology greatly reduces driving torque
- Specially designed sharp point penetrates hard wood products with ease
- 6-lobe drive helps prevent driver-bit cam-out while driving easier and extending bit life (replacement bit BITTX25)
- Length: 3 in.
-
Standard Shipping
$32.01
Features:
- Ideal for retrofit or new construction projects
- Can be installed with cast-in-place or post-installed anchor bolts
- Four-ply formed steel provides increased tension capacity
- Anchor bolt washers not required
- 2-1/2 in. width x 16 in. length
-
Standard Shipping
$1.89
Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- Speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: 2×8 and 2×10
-
Standard Shipping
$17.17
Features:
- The minimum effective shank length must equal or exceed the sum of the thickness of the attached material and the minimum embedment depth
- Code listed per ICC-ES ESR-2138, Florida FL15730 and LA RR25469
- Compatible with Simpson Strong-Tie powder-actuated tool systems as well as other common tools
- .300-in. head diameter / .157-in. shank diameter
- 1-in. washer
-
Standard Shipping
$3.03
Features:
- LUC-series hangers are tested, load rated and code compliant
- The LUC series installs using several fastener selections with tested allowable loads
- Suitable for nominal 2×10 and 2×12 lumber
- Made from 18-gauge steel
- ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
-
Free Shipping
$189.99
Features:
- Redesigned tip and thread pattern provides easy starts and up to 25% less torque while driving makes for up to 20% faster driving
- Less installation torque also means less wear on tools
- Deep 6-lobed recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs
- The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks
- WSV screws can be easily backed out, allowing for future access to floor cavities
-
Standard Shipping
$1.35
Features:
- Load-rated, precut strap designed for quick installation and optimal performance
- Designed to resist wind and seismic forces
- Floor-to-floor clear span application
- Width: 1-1/4 in.
- Length: 18 in.
-
Standard Shipping
$77.26
Features:
- SDS screws are supplied with the holdowns to ensure proper fasteners are used
- No stud bolts to countersink at openings
- Height: 14 in.
- Made from 7-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
Standard Shipping
$1.99
Features:
- Holds the rafter or truss on both sides for high lateral load resistance
- Used for a variety of connections where one member crosses another
- Can be installed on inside or outside of wall, or both sides
- Can be installed with flanges facing either inward or outward
- Made from 18-gauge steel
-
Standard Shipping
$2.29
Features:
- An indented embedment line ensures accurate embedment depth
- Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
- Load rated for wind and seismic forces
- 12-in. exposed length
- Embed 4 in. into a poured concrete bond beam or grouted block wall
-
Standard Shipping
$13.49
Features:
- Suitable for retrofit applications
- The embossments add stiffness in crucial areas for improved performance
- Simple to install and can be installed on the inside or outside of the wall
- Load rated to resist high-wind forces
- 2-ply
-
Standard Shipping
$53.96
Features:
- Attaches a post to existing concrete for decks, patio covers and other top-supported structures
- Features 1-in. standoff to help prevent rot at post end
- Slotted for adjustability
- Designed for versatility, cost-effectiveness and maximum uplift performance
- Nominal post size: 6×6
-
Standard Shipping
$2.41
Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- Speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: 2×10, 2×12, 2×14
-
Standard Shipping
$4.42
Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- Speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: Double 2×10 and Double 2×12
