View cart “Simpson Strong-Tie STN22-R8 Outdoor Accents Hex-Head Washer” has been added to your cart.
Showing 41–80 of 415 results
-
Standard Shipping
$155.89
Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available
- Fastener holes are slightly offset to help prevent fastener interference
-
Standard Shipping
$87.26
Features
- Tested in accordance with ACI 355.2 and AC193
- Qualified for static, wind and seismic loading conditions
- Available in 1/2″ and 5/8″ diameters
- Standard fractional sizes — the hole size matches the anchor size
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- For added convenience, a 1/2″ socket adapter and (2) T-drive bits are included in each box
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- Washer head allows screw anchor applications incompatible with a hex head
-
Standard Shipping
$4.95
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Standard Shipping
$23.49
Features
- Use all specified fasteners; see General Notes
- Use the Outdoor Accents structural wood screw (SDWS22312DBB) and hex-head washer (STN22) to connect to the joist
- Use the Strong-Drive SDS Heavy-Duty Connector screw (SDS25300) to connect to the header
- Fasteners sold separately
-
Standard Shipping
$18.89
Features
- Use with Outdoor Accents decorative hardware and STN22 hex-head washer for an appealing look
- Use Outdoor Accents structural screw without the washer as a wood-to-wood fastener
- Deep 6-lobe T40 recess provides easy, secure driving (T40 drive bit included in multi-count packages)
- Patented SawTooth® point (3 1/2″ and 5 1/2″ screws only) ensures fast starts, reduces installation torque and eliminates the need for predrilling in most applications; Type-17 point on 2″ screw ensures fast starts
- Black double-barrier coating offers premium look while providing a medium level of corrosion
-
Standard Shipping
$101.59
Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available
- Fastener holes are slightly offset to help prevent fastener interference
-
Standard Shipping
$1.66
Features:
- Embossment feature provides strength at the bend
- Features optional diamond holes of various uplift capacities with min./max. nailing configurations
- Can be installed before or after placement of wall
- Width: 1-1/2 in.
- Length: 7-7/8 in.
-
Standard Shipping
$26.19
Features
- Use with Outdoor Accents decorative hardware and STN22 hex-head washer for an appealing look
- Use Outdoor Accents structural screw without the washer as a wood-to-wood fastener
- Deep 6-lobe T40 recess provides easy, secure driving (T40 drive bit included in multi-count packages)
- Patented SawTooth® point (3 1/2″ and 5 1/2″ screws only) ensures fast starts, reduces installation torque and eliminates the need for predrilling in most applications; Type-17 point on 2″ screw ensures fast starts
- Black double-barrier coating offers premium look while providing a medium level of corrosion protection for many outdoor applications
-
Standard Shipping
$64.55
Features:
- Uses Strong-Drive screws, which allow for fast installation, reduced reveal and high capacity
- Provides a 1-in. standoff between post and concrete that meets code requirements
- Embeds in wet concrete at time of pour
- The standoff base reduces the potential for decay at post and column ends
- Shipped with base plate assembled
-
Standard Shipping
$95.59
Outdoor Accents gable plates add decorative appeal and strength to any outdoor living space. They provide reinforcement for a connection from a wood beam to three angled wood braces. Three sizes are available: 6:12 pitch, 8:12 pitch and 12:12 pitch. Gable plates are easily installed with Outdoor Accents structural screws and hex-head washers.
-
Standard Shipping
$95.59
Features
- Gable plates are easily installed with Outdoor Accents structural screws and hex-head washers (fasteners sold separately)
-
Standard Shipping
$124.29
Features
- Certified welds for confidence in strength and loading
- Uplift loads increased for earthquake or wind loading
- Bolt spacing that meets NDS code requirements to ensure optimal performance
- Diamond holes to provide temporary fastening
-
Standard Shipping
$15.19
Features
- Combined with the Outdoor Accents structural wood screw (SDWSDBB), it provides a structural load-rated solution
- Easy to install
- Code listed in IAPMO-UES ER-192
-
Standard Shipping
$61.84
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Standard fractional sizes, hole size same as anchor size
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
- Countersunk head allows screw anchor applications incompatible with a hex head
- Available in 1/4″ and 3/8″ diameters
-
Standard Shipping
$95.38
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Standard Shipping
$28.99
Features
- (8) Rigid Tie RTC2Z connectors
- (100) Simpson Strong-Tie #8 x 1 1/4″ Wafer-Head screws
-
Standard Shipping
$7.69
Features:
- Features double-shear nailing which distributes the load through two points on each joist nail for greater strength
- Allows for the use of fewer nails, faster installation, and the use of standard nails for all connections
- Do not bend or remove tabs
- Nominal joist size: 4×8
- Made from 14-gauge steel
-
Standard Shipping
$26.60
Features:
- An 18-element mixing nozzle for use with 22 oz. and 56 oz. epoxy adhesive cartridges
- This is a one-piece nozzle with integrated nut (separate retaining nut not required)
- Once the epoxy hardens in the nozzle it can be used as a cap to keep the product fresh
- Each nozzle is 14 in. long for use in all depths of holes
- Quantity: 5
-
Standard Shipping
$29.10
Features:
- Extra optional triangle holes for additional load
- HUC-series hangers are tested, load rated and code compliant
- Install wood joists to wood, masonry and concrete
- Seat width: 3-1/8 in.
- Nominal joist Size: Double 2×10
-
Standard Shipping
$84.56
Features:
- Type-17 point enables easy driving with no predrilling and minimal wood splitting
- 3/8-in. hex head with 0.48-in. integrated washer
- Head is stamped with the Simpson Strong-Tie — sign and fastener length for easy identification after installation
- Serrated threads
- Replacement driver bit model BITHEXR38-134 (not included)
-
Oversized Shipping
$4,364.89
Features
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials
-
Standard Shipping
$235.69
Features
- Quick and easy installation
- Made of durable noncorrosive plastic
- No tools required
- Made in the USA with global materials
-
Standard Shipping
$124.69
Features
- Adjustable hub size
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials
-
Standard Shipping
$90.69
Features
- Adjustable hub size
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials
-
Oversized Shipping
$1,945.59
Features
- Adjustable hub size
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials
-
Oversized - Special Order
$7,518.79
Features
- Quick and easy installation
- Made of durable noncorrosive plastic
- No tools required
- Made in the USA with global materials
-
Oversized Shipping
$4,364.89
Features
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials
-
Oversized Shipping
$2,388.49
Features
- One-piece design
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- No tools required
-
Standard Shipping
$249.89
Features
- Quick and easy installation
- Made of durable noncorrosive plastic
- No tools required
- Made in the USA with global materials
-
Oversized Shipping
$1,467.29
Features
- Adjustable hub size
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials
-
Oversized Shipping
$4,656.99
Features
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials
-
Standard Shipping
$292.29
Features
- Quick and easy installation
- Made of durable noncorrosive plastic
- No tools required
- Made in the USA with global materials
-
Standard Shipping
$185.19
Features
- One-piece design
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- No tools required
-
Standard Shipping
$162.89
Features
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials
-
Standard Shipping
$106.89
Features
- Adjustable hub size
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials
-
Standard Shipping
$110.29
Features
- One-piece design
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- No tools required
-
Standard Shipping
$115.89
Features
- One-piece design
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- No tools required
-
Oversized Shipping
$2,485.59
Features
- One-piece design
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- No tools required
-
Standard Shipping
$271.59
Features
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials
-
Standard Shipping
$242.39
Features
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials