Showing 1–40 of 89 resultsSorted by popularity
-
$252.62
Max USA Battery Charger The JC925 (JC925A) is a charger for select rebar tying tool and rebar cutter/bender batteries from Max USA. This charger delivers a full charge in 65 minutes achieving 80% in just 50 minutes regardless of AH rating. Charges OEM lithium ion (Li-on) batteries for the following Max tools: RB218 RB398 RB518…
-
$592.39
Features:
- 2 HP electric motor with rugged shock-absorbing frame
- 115V, 15A with watertight, strain-relief power cord
- Drives up to 2-1/2 in max head; shafts up to 60 ft (with connector)
- Cast aluminum housing dissipates heat; serviceable parts accessible
- Motor only; flexible shafts and heads sold separately
-
Features
- Powerful 7 amp motor
- Torque limiting clutch engineered to prevent gear damage
- Variable speed trigger
- 40 bit angle settings
- One-touch sliding chuck for quick bit changes
-
$885.99
Features:
- Air Actuated Counterbalance System
- Vibration Absorbing Housing
- Powerful 11 Amp Motor Delivers 8.4ft/lbs of impact energy
- Variable Speed Dial
- Soft Start and Soft No Load functions
-
$2,439.00
Features
- 15 AMP breaker hammer motor which delivers 53.9 ft.lbs./72.8 joules of impact energy
- Advanced AVT® Vibration Reduction Technology
- L.E.D. service light notifies the user approximately 8 hours before brushes need to be replaced
-
Features
- 14A Motor Delivers 12.7ft/lbs of Impact Energy
- Internal Counterbalance Antivibration Technology
- Variable Speed Control Dial
- Constant Speed Control
- LED Indicator Alerts Users To Maintenance Needs
-
Features
- DISCONTINUED, REPLACED with DCE512B
- Wide-range, variable speed control
- Multiple hanging options, free-standing, hang hooks, tripod-mount and wall-mount
-
$212.99
Features
- Powerful 10.5 AMP motor delivers more output for increased performance
- Refined design at only 5.8 lbs. for reduced operator fatigue
- AC/DC switch for use with alternative power source
- Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life
- Externally accessible brushes for greater serviceability
-
4% OFF
$164.99 Original price was: $164.99.$158.39Current price is: $158.39.
Features
- DCC020IB features three power sources for on the go [20V MAX battery, 12V DC, or 110V AC]
- Convenient onboard accessory storage
- Heavy-duty rubber feet help reduce walking when in use
- Threaded chuck for secure connection to inflation valve
- High-pressure inflation mode with automatic shutoff
DCCO20IB Instruction Manual
-
$347.99
Features
- Simultaneous Charger: All Ports Charge At The Same Time
- Charges 12V MAX*, 20V MAX*, and FLEXVOLT® 20V/60V MAX* Batteries
- 8 Amps Output Per Port (simultaneously)
- Charges (4) DCB204 battery in 40 mins
- Side Brackets To Mount Onto The ToughSystem™ Rails
-
$178.99
Features
- Push-button temperature control (122 – 1,202°F) for precise control over a wide variety of applications with LCD temperature reading
- Slide switch sets three air flow settings (cooling, low, high) for greater versatility
- Push-button temperature control increases by 50°F increments for exact temperature adjustment
- Compact 2.0 lb. design features a rubberized pistol grip handle and an integrated rear stand
- Ideal for vehicle wraps and tinting, stripping lacquer, paint and varnish, thawing frozen pipes, loosening tile and putty, re-melting adhesive, removing stickers, waxing and de-waxing, bending plastic pipes and sheets, and more
-
$614.99
Features
- SP6000J1 features 12 AMP motor with variable speed control dial (2,000 – 5,200 RPM) for optimum performance in a variety of materials
- Large cutting capacity (2-3/16″ at 90° and 1-9/16″ at 45°)
- Bevel capability (-1 to 48°) with positive stops at 22.5° and 45°
- Close to the wall cutting (11/16″) for expanded cutting applications
- Ideal for cutting large wood panels and other wood materials in confined areas
SP6000J1 Instruction Manual
-
$347.99
Features
- Dust extraction shroud is designed to capture dust during concrete surfacing applications
- Powerful 15.0 AMP motor delivers 6,600 RPM for optimum durability and performance
- Anti-restart protection is designed to prevent motor start up in the on-power switch position after a power disruption
- Power light indicates switch failure, cord damage or worn-out motor brushes
- Loop handle can be held at multiple positions for increased comfort in various orientations
- Rear handle trigger switch with lock-off feature requires two actions to power on
-
$1,385.99
Features:
- Powerful 14 Amp Motor
- AVT Counterbalance System for Reduced Vibration
- Automatic brush cutout system for longer tool life
- Variable speed adjustable dial control
-
$1,179.99
Features:
- 1.0 HP, 115V/6.8A, Single-Phase
- 2 in NPT female discharge
- Max capacity: 95 GPM; Total head: 45 ft
- Handles up to 1 in solids; Pumps liquid up to 120°F
- Cast iron housing and abrasion‑resistant impeller
- Built-in thermal overload protection
- Dual shaft seals and sealed ball bearings
- Carrying handle and molded power cable with strain relief
-
$192.99
Features
- Charges two (2) 18V Compact Lithium-Ion 2.0Ah batteries in only 25 minutes
- Charges two (2) 18V LXT® Lithium-Ion 3.0Ah batteries in only 30 minutes
- Charges two (2) 18V LXT® Lithium-Ion 4.0Ah batteries in only 40 minutes
- Charges two (2) 18V LXT® Lithium-Ion 5.0Ah batteries in only 45 minutes
- Charges two (2) 18V LXT® Lithium-Ion 6.0Ah batteries in only 55 minutes
-
$192.99
Features
- Powerful motor delivers up to 740 CFM on high setting
- Three speed settings (High/Medium/Low) and Oscillation selector for optimal air velocity and control
- Designed for reduced wind noise level for quiet operation at only 52 dB
- Oscillates 45º right and left
- Up to 14 hours of continuous run time in Low speed with 18V LXT® 6.0Ah Battery BL1860B (battery not included)
-
$201.99
Features
- Powerful motor delivers up to 740 CFM on high setting
- Three speed settings (High/Medium/Low) and Oscillation selector for optimal air velocity and control
- Automatically oscillates 45º right and left
- Manually tilts 90º up and 45º down for convenient redirection of airflow
- 3-stage automatic timer with 1, 2, and 4 hour power-off selection
-
17% OFF
$314.99 Original price was: $314.99.$260.00Current price is: $260.00.
Features
- Dewalt DCR025 is able to be powered by 20V MAX* and FLEXVOLT® 20V/60V MAX* batteries, as well as AC power cord
- 3 AMP charging of 20V MAX and 60V MAX DEWALT Batteries when unit is plugged into AC power
- Bluetooth connectivity up to 100 ft
- 2 Additional AC power outlets
- Auxillary & 2.1 AMP USB Charging Ports
-
$153.99
Features
- LCD display allows user to adjust temperature within 50-degree increments
- Built-in overload protection shuts the heating element down and prevents burn up
- Built-in hang ring adds a convenient storage feature
- Cord protector keeps the cord from tearing away from the housing
- Built-in innovative kickstand support provides greater stability and prevents tip over
-
$256.99
Features
- Electric brake for maximum productivity
- Magnesium components create a lightweight saw (10.6 lbs.) that’s well-balanced and job site tough
- Powerful 15.0 AMP motor delivers 5,800 RPM for proven performance and job site durability
- Large cutting capacity (2-1/2″ at 90°) and bevel capacity (0°-56°) with positive stops at 22.5°, 45°, and 56°
- Large rubberized levers for quick and easy one-handed adjustments
-
$155.99
Features
- 2-mode operation: delivers 750 lumens on High mode or 450 lumens on Low mode
- Up to 10 hours of continuous illumination with a 6.0Ah 18V LXT® battery on High mode (battery and charger not included)
- Up to 20 hours of continuous illumination with a 6.0Ah 18V LXT® battery on Low mode (battery and charger not included)
- L.E.D. lights effectively illuminate work area without the high heat of halogens
- Adjusting knobs enable the user to direct the flood light to desired angle
-
$427.99
Features
- PC5010CX1 dust extraction shroud is designed to capture dust during concrete surfacing applications
- Powerful 12.0 AMP motor delivers more output and (4,000 – 9,000) RPM
- reduce vibration for increased operator comfort during extended use
- Manual RPM adjustment (4,000-9,000) to match the speed to the application
- Speed Control automatically applies additional power to the motor to maintain speed under load
PC5010CX1 Instruction manual
-
$351.99
Features
- Powerful 15 AMP motor delivers 3,800 RPM for superior performance and durability
- “Tool-less” flange removal for quick and easy blade and wheel changes
- Extra-large spark guard captures and deflects debris away from the surrounding area
- Large cutting capacity; cuts up to 5″ round and 4″ x 7-5/8″ rectangular
- “Tool-less” fence adjustment up to 45º for faster and more accurate angle cuts; adjusts to 3 locations for various material sizes
- “Tool-less” vice adjustment for quick and easy clamping of material
- Locking pin secures cutting head in down position for easy transport and storage
- Stamped steel base provides added rigidity for increased durability
-
$699.99
Features:
- 3 HP, 19A electric motor in durable cast aluminum housing
- Shock-absorbing frame doubles as a carry handle
- Watertight, strain-relief power cord with protected switch
- Drives concrete vibrating heads up to 2.5 in diameter
- Shafts and heads sold separately
-
$659.99
Features:
- 2 HP, 15 amp electric motor for concrete vibration
- Durable cast aluminum housing dissipates heat
- Shock-absorbing frame with protected power switch
- Watertight, strain-relief power cord
- Drives heads up to 2.5 in diameter (shafts & heads sold separately)
-
$455.49
Features:
- 1.5 HP electric motor with 13A draw
- High-strength cast aluminum housing dissipates heat
- Shock-absorbing frame doubles as carrying handle
- Watertight, strain-relief power cord; protected switch
- Drives concrete vibrating heads up to 1.5 in diameter (sold separately)
-
$609.99
Features:
- 1.5 HP electric motor with rugged shock-absorbing frame
- Watertight, strain-relief power cord; switch protected by frame
- Up to 1-3/4 in max head diameter; compatible with shafts up to 42 ft (with connector)
- Factory-sealed heads require no maintenance
- 115V, 13 amp; built to withstand tough jobsite use
-
$769.00
Features:
- 8.2 ft-lbs EPTA impact energy for top drilling and chiseling performance
- SDS-max bit system with tool-free bit changes and automatic bit-locking
- Vario-Lock rotates chisel into 12 positions for optimal working angle
- Variable speed dial for controlled drilling and chipping
- Service Minder light indicates when maintenance is required
- Soft-grip rear handle and 360° auxiliary handle for comfort
-
$1,999.00
Features:
- Active Vibration Control reduces vibration via an air-cushion mechanism and shock-absorbing handles
- 43 Ft.-Lbs. impact energy with 1,000 BPM for fast concrete removal
- Ergonomic handle design for comfort and control during all-day applications
- Grease-packed gearbox and hammer mechanism for durability
- Service Minder Brush System indicates preventative maintenance
- Includes deluxe hammer cart, two narrow chisels, and two star point chisels
-
$119.00
Features:
- High-power 16A turbo charger for rapid charging
- Integrated Mode button with Power Boost and Long Life modes
- Active air-cooling with dual fans to optimize charge time
- Five-LED battery charging status indicator
- Works with Bosch 18V lithium-ion batteries and AMPShare system
-
$929.00
Features:
- Powerful 14.5-amp motor delivers 9.3 ft.-lbs. of impact energy
- Vibration Control for maximum user comfort on all-day jobs
- Dual-mode selector switches between rotary hammer and hammer-only
- Constant Response circuitry for soft-start, constant speed under load, and overload protection
- Turbo Power provides a 20% power boost in hammer-only mode
- SDS-max bit system enables tool-free bit changes and strong impact energy transfer
-
$299.00
Features:
- Powerful 8.0-amp motor delivers 2.4 Ft.-Lbs. of impact energy
- Vibration Control in mechanism and grip for comfort during extended use
- Three modes: rotary hammer, rotation-only, and hammer-only
- Keyless SDS-plus shank accepts bits up to 1-1/8 in. diameter
- Integral clutch reduces torque reaction in bind-up
- Variable-speed trigger with reverse for accurate starts and removing fasteners
- Compact and lightweight at 12.5 in. long and 7.7 lb
-
$69.00
Features:
- Powerful 7.5 Amp motor delivers 11,000 no-load RPM
- Slim-grip design for comfortable extended use
- Durable carbon brushes for extended tool life
- Two-position side handle for better control
- Directed air flow helps divert dust from vital components
- Burst-protection guard with quick adjustment
- Service Minder brushes indicate when maintenance is required
- Large spindle lock for easy disc changes
-
$99.00
Features:
- Powerful 11-amp motor delivers 11,000 RPM
- KickBack Control helps shut off tool in a bind
- Restart and overload protection with soft start
- Anti-vibration side handle for comfort
- Adjustable tool-free guard with multiple fixed settings
- Lock-on paddle switch for greater control
-
$199.00
Features:
- Robust 15 Amp motor delivers fast cutting performance with high overload capacity
- 5 in. cutting capacity for larger ferrous metal workpieces
- Adjustable fence with miter angle provides 0–45° left cuts and three mounting locations
- 4,100 no-load RPM for smooth, accurate cuts
- Adjustable spark guard helps control spark direction for user protection
- Ergonomic, moderate 31 lb design for comfortable, ambidextrous use and easy transport
-
$489.00
Features:
- 5.6 ft-lbs impact energy in a 12.4 lb light, compact body
- SDS-max bit system with tool-free changes and automatic bit locking
- Vario-Lock positions chisel in 12 angles for optimal working
- Variable-speed trigger and dial with lock-on button
- 360° rotating auxiliary handle and ergonomic grip area
- Service modules allow quick brush and cord replacement
-
$439.00
Features:
- 6.1 ft-lbs impact energy for fast drilling and chiseling
- SDS-max bit system enables tool-free, one-handed bit changes
- Vario-Lock with 12 chisel positions to optimize working angle
- Dual-mode selector for rotary hammer or hammer-only
- Service minder brushes indicate when maintenance is needed
- Includes auxiliary handle, grease tube, and carrying case
-
$229.00
Features:
- Powerful 13-amp motor delivering 11,500 rpm in a compact design
- KickBack Control helps shut off the tool if wheel binds
- Restart and overload protection for added safety and durability
- Soft start for smooth startups
- Anti-vibration side handle for comfort in long applications
- Lock-on paddle switch for greater control and ergonomics
- Variable-speed selection to match the application
