Showing 281–320 of 7316 resultsSorted by popularity
-
$8.99
Features
- High-performance, industrial-strength coating protects steel rebar
- Primes ferrous metal in sea air/saltwater conditions
- On-site spot repair of rebar
- Equipment needing protection from road salt
-
$97.99
Features
- Promote ease-of-use with the step-to-lift function enabled by the reinforced-handle
- Complete a wide range of applications with a lift capacity of up to 340 lbs.* and a lift height of 8-3/4 in
- Lower with control and make fine-tune adjustments when leveling with the precision controlled lowering tab
- Get underneath applications quickly with a slim, tapered base.
- Help maximize comfort during strenuous tasks with the DWHT83550 featuring an over molded handle, and reinforced metal ribs that provide additional support for tough loads.
-
$34.49
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
$12.79
Features
- APT4 offers ZMAX galvanization with a black powder coat offers extra corrosion resistance for exterior and treated-wood applications
- Install with Outdoor Accents structural screws and hex-head washer (sold separately) for a decorative look
Wood Construction Connectors Resources
-
$2.69
Features
- APVDW56 is corrosion resistant
- Offers versatile use
- Easy installation
-
$3.39
Features
- APDPC6 fits Nominal 4×4 and 6×6 Wood Posts
- Decorative Square Design
- Moisture Protection
- Durable Material
-
-
$28.09
EXTENDED LIFE BLUE EDGER BLADE, 6 X 14
Minimum order quantity: 4
Order in multiples of: 4
-
$296.41
Features:
- Flat head
- SSDWP3S305 has a unique box thread design with raised-ridge technology greatly reduces driving torque
- Specially designed sharp point penetrates hard wood products with ease
- 6-lobe drive helps prevent driver-bit cam-out while driving easier and extending bit life (replacement bit BITTX25)
- Length: 3 in.
-
$0.00
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
-
$11.99
Features
- SD9112R100 is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
4% OFF
$388.99 Original price was: $388.99.$373.43Current price is: $373.43.
Features
- Weld‑on ring with 180° swivel
- For applications on floor/roof panels, wall panels, beams and columns
- MTHLD6 is OSHA Section 1926.753(e)(2) compliant
-
$44.69
Features
- Easy installation
- Decorative and functional
- Durable coating
- SDWS22512DBB-R50 offers strong structural hold
-
$48.89
Features
- APVGP1212-4 offers strong and decorative reinforcement
- Versatile design
- High-quality construction
- Enhanced corrosion resistance
-
4% OFF
$95.59 Original price was: $95.59.$91.76Current price is: $91.76.
Features
- APVGP1212 is easily installed with Outdoor Accents, structural screws and hex-head washers
- Fasteners sold separately
-
$6.79
Features
- APDJT2-4 offers durable construction
- Corrosion resistance
- Quick & easy installation
- Clean Aesthetic
-
![G-Tek 34-500 Seamless
Knit Nylon Glove with Nitrile Coated MicroSurface Grip on Palm & Fingers
[1 dozen] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/34-500-UP-600x600.jpg)
$29.69
Features:
- Seamless knit nylon shell offers increased comfort, finger dexterity and breathability
- Nitrile MicroSurface coatings are impermeable providing an elevated grip in dry and oily conditions, infused with thousands of tiny suction cup pockets that create a vacuum effect that dispenses fluids away on contact
- Knit Wrist helps prevent dirt and debris from entering the glove
- Color coded hems for easy size identification
- Washable, resistant to chemicals, water, and ultraviolet light
- Breathable glove shell
- This style is also available tri-folded and shrink-wrapped for carefree dispensing through vending machines (34-500V)
-
$17.49
FLUTED BRICK, 8X2X2, 20 GRIT
-
$69.67
POWER TROWEL STONE HOLDER <36
-
-
$35.64
BULL FLT GROOVER ATTACH, 3/4in
-
$14.15
Features:
- Suitable for lighter duty holdown applications on single or double 2x posts
- Ties the guardrail post into deck framing
- Stronger and safer than nails, lag screws or bolts
- Ties the deck into the house for a stronger, safer ledger connection
- Helps prevent a common type of deck failure
-
![TW1061T-PC-[Roll]](https://www.heydensupply.com/wp-content/uploads/2021/01/max-tw1061t-pc-poly-coated-tie-wire-1.jpg)
$640.99
Features:
- Poly Coated Wire Resists Rust and Corrosion
- Use with epoxy coated rebar
- 19 Guage Rebar Tie Wire
- For use with MAX RB441T TwinTier and RB401T-E TwinTier
-
![West Chester J1247RF PVC Dipped Glove with Jersey Liner and Rough Sandy Finish - 14" Length [1 dozen] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/J1227RF-600x600.jpg)
-
![[15 Pack] Simpson Strong-Tie THD50600WH Titen HD 1/2 in. x 6 in. Washer-Head Heavy-Duty Screw Anchor product image](https://www.heydensupply.com/wp-content/uploads/2023/01/15-Pack-Simpson-Strong-Tie-THD50600WH-Titen-HD-12-in.-x-6-in.-Washer-Head-Heavy-Duty-Screw-Anchor-9-600x600.jpg "[15-Pack]-Simpson-Strong-Tie-THD50600WH-Titen-HD-12-in.-x-6-in.-Washer-Head-Heavy-Duty-Screw-Anchor-(9)")
$43.92
Features
- THD50600WH is tested in accordance with ACI 355.2 and AC193
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- Washer head allows screw anchor applications incompatible with a hex head
-
Features
- 13 Amp motor
- 9000 rpm no-load speed for applications with 6 in. grinder wheels
- Brake engages when trigger is released with stopping speeds of 1.5 seconds when using a standard grinding wheel (4-1/2 in. x 1/4 in. bonded abrasive wheel, non-hubbed)
- Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut the grinder off
- E-CLUTCH® activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor
- Up to 30% more power vs the DCG414 Grinder
-
![West Chester HVO500
Premium Grade Split Cowhide Leather Palm Glove with Hi-Vis Fabric Back -
Rubberized Safety Cuff [1 dozen] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/HVO500-600x600.jpg)
$67.39
Features:
- Gunn cut pattern delivers excellent durability, wear and comfort, especially for heavier gloves
- Wing thumb increases comfort in open-handed work
- Leather palm and finger tips for extra protection
- Rubberized fabric safety cuff helps protect wrist, allows for fast removal, and water resistance
- Reflective band over knuckle and cuff provides workers with greater visibility in high risk and low-light applications
- Hi-Vis coloring makes this product very easy to see
-
$3.89
Features
- Blended nylon/spandex shell
- Foam nitrile dipped palm
- Water resistant palm coating
- Elastic slip-on cuff
- Meets EN 388:2003 standards for abrasion, cuts, tear and puncture (4 1 3 1)
- Meets ANSI/ISEA 105 Abrasion Level 6.”
-
-
$99.99
Features:
- Manual dispensing tool
- EDT22S features a steel carriage and is engineered for high-volume, continuous use
- The tool can be easily convert from dispensing a 22 oz. 1:1 ratio cartridge to a 16.5 oz. 2:1 ratio cartridge
- For 22 oz. adhesive cartridges
-
$592.39
Features:
- 2 HP electric motor with rugged shock-absorbing frame
- 115V, 15A with watertight, strain-relief power cord
- Drives up to 2-1/2 in max head; shafts up to 60 ft (with connector)
- Cast aluminum housing dissipates heat; serviceable parts accessible
- Motor only; flexible shafts and heads sold separately
-
$3.99
Features
- Evaporative Advanced PVA Material
- Does Not Feel Heavy
- Anti-Microbial
- Simple Soak in Water to Activate
- Reusable
- Machine Washable
- Use as Neck Wrap by Pulling End Through Slit
- 26 x 8.5 inches
-
$51.99
Features
- Remote-Control Adjustments – Help maximize jobsite efficiency by making precise horizontal or vertical line adjustments with a remote control range up to 330 ft. (100m)
- Sleep Mode – Help optimize battery performance with its sleep mode that automatically activates after 60 seconds of non-use
- Jobsite Ready – Power your Remote Control with the included (2) AA batteries
-
$29.39
Features
- SET3G10 REPLACES SET-XP10
- Sustained load performance at elevated temperature.
- For all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C).
Anchor Technical Notes
-
$1.69 – $2.09Price range: $1.69 through $2.09
Features
- 5-position ratcheting temples with telescoping earpieces for a completely customized fit.
- Full side shield coverage and extended brow coverage for superior protection.
- Hard-coated to help withstand scratching.
- Polycarbonate protective lenses are impact resistant and provide 99.9% UV protection.
- Two frame colors to choose from.
-
$7.59 – $8.39Price range: $7.59 through $8.39
Features
- Meets ANSI Z87.1+ standards.
- Removable head strap provides an adjustable safety goggle-like fit.
- Removable head strap provides an adjustable safety goggle-like fit.
- Anti-Fog polycarbonate protective lens provides impact resistance and fog control.
- Rubber nose piece for all day comfort.
-
$5.28 – $6.06Price range: $5.28 through $6.06
Features
- Meets ANSI Z87.1+ standards.
- Dual mold rubber temples provide a secure, comfortable fit.
- Polycarbonate lens provides impact resistance.
- Soft, rubber nosepiece offers maximum all-day comfort.
- Provides 99.9% UV protection against harmful UV rays.
-
$9.36 – $10.62Price range: $9.36 through $10.62
Features
- Safety glass exceeds ANSI Z87.1+ standards and provides 99.9% UV protection.
- Double Duty Interchangeable Temples and Elastic Head Strap.
- FOAM SHIELD Debris Protection provides a soft, comfortable seal.
- Ratcheting Bayonet Temple Arms allow for a comfortable, customized fit.
- All lens options are ANTI-FOG.
-
![[Box of 12] Dewalt DPG108 Renovator Premium Safety Eyewear product image](https://www.heydensupply.com/wp-content/uploads/2023/08/DPG108-1_M3-600x600.jpg "DPG108-1_M3")
$6.02
Features
- Meets ANSI Z87.1 Standards
- 9 Base Curve Lens for Wraparound Protection
- Adjustable Vented Nosepiece for Comfortable Fit
- No-slip Rubber Temples for Secure Fit
- Removable, Washable Rubber Brow Guard
-
$6.79
Features
- Complies with ANSI Z87.1 standards
- Vented Rubber Nosepiece for comfort and breathability
- Rubber Insert Temple Grips for a snug fit
- Bifocal lens
- Hard coat polycarbonate lens protects against scratches
