Showing 3001–3040 of 7303 resultsSorted by popularity
-
15% OFF
$87.99 Original price was: $87.99.$74.99Current price is: $74.99.
Features
- Dual-evaluated under ICC-ES AC233 and AC120 for wood-frame subfloor fastening
- Yellow zinc coatings are applied in accordance with ASTM F1941
- HCKWSV2S features less wear on tools and more screws driven per battery charge
- Deep 6-lobe recessed ribbed head provides clean countersinking
-
14% OFF
$89.99 Original price was: $89.99.$76.99Current price is: $76.99.
Features
- Dual-evaluated under ICC-ES AC233 and AC120 for wood-frame subfloor fastening
- Yellow zinc coatings are applied in accordance with ASTM F1941
- HCKWSV212S features less wear on tools and more screws driven per battery charge
- Deep 6-lobe recessed ribbed head provides clean countersinking
-
13% OFF
$88.99 Original price was: $88.99.$76.99Current price is: $76.99.
Features
- HCKWSV134S features less wear on tools and more screws driven per battery charge
- Deep 6-lobe recessed ribbed head provides clean countersinking
- Reduces the gaps between the joist and subfloor that cause floor squeaks
- Can be easily backed out, allowing for future access to floor cavities
-
$98.99
Features
- QDPROJECTPRO features auto-fed technology drives screws repeatedly
- Works with most cordless drill or driver motors.
- Install screws up to four times faster than traditional drivers alone.
- Designed for use with 1 5/8″ – 2 1/2″ Strong-Drive WSV and Deck-Drive DSV Wood screws collated for Quik Drive systems.
-
5% OFF
$325.99 Original price was: $325.99.$310.99Current price is: $310.99.
Features
- Norton provides a smoother cutting surface on the blade, reducing segment wear and enhancing overall performance.
- Reduced angle of contact
- Arrow shaped gullets generate a stronger airflow
- More dedicated cutting power
-
$15.99
87691 Features:
- Fade Resistant Technology
- Meets 500lb minimum tensile strength required by OSHA for perimeter marking.
- Highly effective at drawing attention for safety, traffic or an event.
- Constructed from Polypropylene Film Flags and sag resistant poly rope
-
8% OFF
$79.99 Original price was: $79.99.$73.99Current price is: $73.99.
-
9% OFF
$107.30 Original price was: $107.30.$97.30Current price is: $97.30.
-
Features
- 50TMA2.4S is corrosion resistant
- Bore: 2″/50mm
- Solids DIA.: 0.394″/10mm
- Viscosity: 1.123cSt.
- Phase: 1
-
8% OFF
$598.99 Original price was: $598.99.$552.99Current price is: $552.99.
Features
- PX400 is corrosion resistant
- Overload protection
- Dewaters Flat Surfaces Up To 1.5” Levels.
- MAX Capacity: 72 GPM.
- Phase: 1
PX400 Manual
-
2% OFF
$1,939.99 Original price was: $1,939.99.$1,910.00Current price is: $1,910.00.
Features
- 50TMA2.75S is corrosion resistant
- Bore: 2″/50mm
- Solids DIA: 0.394″/10mm
- Viscosity: 1.123cSt
- Phase: 1
-
2% OFF
$1,939.99 Original price was: $1,939.99.$1,910.00Current price is: $1,910.00.
Features
- 50TMA2.75S is corrosion resistant
- Bore: 2″/50mm
- Solids DIA: 0.394″/10mm
- Viscosity: 1.123cSt
- Phase: 1
-
2% OFF
![Tsurumi 50TM2.75S Corrosion-Resistant Titanium Submersible Pump for Saltwater Applications [230V] product image](https://www.heydensupply.com/wp-content/uploads/2025/01/71iq49rdH8L._AC_SX679_-4-600x600.jpg "71iq49rdH8L._AC_SX679_")
$1,566.99 Original price was: $1,566.99.$1,543.00Current price is: $1,543.00.
Features
- 50TM2.75S is corrosion resistant
- Bore: 2″/50mm
- Solids DIA: 0.394″/10mm
- Viscosity: 1.123cSt
- Phase: 1
-
2% OFF
$1,566.99 Original price was: $1,566.99.$1,543.00Current price is: $1,543.00.
Features
- 50TM2.75S is corrosion resistant
- Bore: 2″/50mm
- Solids DIA: 0.394″/10mm
- Viscosity: 1.123cSt
- Phase: 1
-
2% OFF
$1,474.99 Original price was: $1,474.99.$1,452.00Current price is: $1,452.00.
Features
- 50TM2.4S provides corrosion resistance
- Viscosity: 1.123cSt.
- Bore: 2″/50mm
- Solids DIA: 0.394″/10mm
- Phase: 1
-
2% OFF
$1,474.99 Original price was: $1,474.99.$1,452.00Current price is: $1,452.00.
Features
- 50TM2.4S provides corrosion resistance
- Viscosity: 1.123cSt.
- Bore: 2″/50mm
- Solids DIA: 0.394″/10mm
- Phase: 1
-
$47.99
Features
- Apply a fine finish
- Hardwood block
- 2148-N is made from quality material
-
$31.99
Features
- 2136-N applies a fine finish
- Hardwood Block
- Alternative to Horsehair
-
-
$6.99
Features
- Marking paint covers more linear feet per can than other brands
- Precision tip results in virtually no overspray
- Use on grass, gravel, dirt, concrete, asphalt and more
- Resists early fading and chalking
- Adheres to hot surfaces; can be sprayed in the cold (to 25°F)
203030V
-
$6.99
Features
- Twice the distance of our regular professional marking paints
- 15 oz. can creates lines up to 800 lin. ft.
- Dries to the touch in 15 minutes for fast applications
- Ideal for marking parking lots, floors, athletic fields and more
-
$68.99
Features
- Easy loading
- Light touch spray control
- Greater comfort and control
-
18% OFF
$79.99 Original price was: $79.99.$65.99Current price is: $65.99.
-
$44.99
Features
- Designed for use with threaded rod and reinforcing bar hardware elements
- Evaluated and recognized for freeze/thaw performance
- Cartridge design allows for multiple uses using extra mixing nozzles
- Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
- Evaluated and recognized for long term and short term loading
-
$29.99
Features
- PFC1271050 is designed for use with threaded rod and reinforcing bar hardware elements
- Evaluated and recognized for freeze/thaw performance
- Cartridge design allows for multiple uses using extra mixing nozzles
- Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
- Evaluated and recognized for long term and short term loading
-
$100.99
Features
- Water resistant plastic box
- Contents meet ANSI Z308.1 – 2015 for Class A, Type, I, II and III
- Color coded contents
- Organized and compact
-
$68.99
Features
- SDNFR4150-O is fire retardant – Meets NFPA 701 Method II and Boston Fire Marshall BFD IX-1
- Reinforced edges for enhanced durability
- Safety Debris Netting features ¼” mesh
- Debris Netting features 1/16” mesh
- PVC Coated Debris Netting features 1/8” mesh
-
19% OFF
$34.65 Original price was: $34.65.$27.99Current price is: $27.99.
Features
- DT8 offers instant adhesion to a wide variety of surfaces
- Woven cloth scrim allows tape to tear easily by hand
- Conformable backing is good for use on contoured surfaces
- Good tensile strength for light duty bundling, repair and holding
- Available in silver and black
-
8% OFF
$38.99 Original price was: $38.99.$35.99Current price is: $35.99.
Features
- Use-on surfaces: 2090-48NC is designed for use on multiple surfaces
- Days clean removal: 14-day interior and exterior clean removal leaves behind no damage or sticky residue
- Adhesive level: Medium
- Performance: UV and sunlight resistant
-
-
$61.99
Features
- Fire Retardant – Meets NFPA 701 Method II and Boston Fire Marshall BFD IX-1
- Reinforced edges for enhanced durability
- Safety Debris Netting features ¼” mesh
- Debris Netting features 1/16” mesh
-
$49.99
Features
- DW5819 feature Iron blast technology
- 2x longer life
- Stands up to rebar strikes
- Wear mark indicator
-
$101.99
Features
- Extreme durability
- 2X longer life
- Stands up to rebar strikes
- Wear mark indicator
- High Impact tip
-
$41.99
Features
- Extreme durability
- longer life
- Wear mark indicator
- High Impact tip
-
$37.99
Features
- Extreme durability
- 2X longer life
- Stands up to rebar strikes
- Wear mark indicator
- High Impact tip
-
$35.99
Features
- Carbide tip geometry is optimized to cut through rebar to easily.
- Durable head design enables drilling in Hammer Mode
- SDS+ shank lets you easily switch between a carbide bit and rebar cutter
-
$30.99
Features
- Carbide tip geometry is optimized to cut through rebar to easily.
- Durable head design enables drilling in Hammer Mode
- SDS+ shank lets you easily switch between a carbide bit and rebar cutter
-
$70.99
Features
- High impact tip maximizes carbide surface contact for longer bit life.
- Open head design channels dust into flutes for quicker drilling.
- Longer helix four flute design expedites mill removal for quicker drilling.
- For use with all brands of SDS max rotary hammers.
-
$40.99
Features
- Iron blast technology
- 2X longer life
- Stands up to rebar strikes
- Wear mark indicator
- No break guarantee
-
$38.99
Features
- Extreme durability
- 2X longer life
- Stands up to rebar strikes
- Wear mark indicator
- Anchor wear mark indicator
