Showing 2521–2560 of 7316 resultsSorted by popularity
-
Features:
- 600 cu in storage to expand ladder workspace
- 25 lb load capacity for tools and supplies
- Lock-In System fits into Werner ladder tops with LOCKTOP sockets
- Integrated tape measure and screwdriver holders
- Top grooves hold round pipes securely
-
Features:
- Holds 1 quart of paint
- Built-in magnet secures paintbrush
- For Werner ladders with Lock-In System sockets
- Compatible with AC27-L disposable liner
- Ideal for trim painting and cut-in work
-
Features:
- Disposable liners for the AC27-P Lock-In Paint Cup
- Easy clean-up and quick change
- Includes four (4) liners per pack
-
Features:
- Convenient tray holds tools, paint, and supplies
- Attaches easily and works at multiple heights
- Designed for Werner MT multi-position ladders and Type IA/IAA stepladders
- Includes sockets for ToolLasso and accessories
-
Features:
- Holds a one-gallon paint can to free hands while working
- Easy on/off; usable right- or left-handed
- Includes two steel hooks with built-in can openers
- Fits all extension ladders
-
Features:
- Helps prevent damage to support surfaces
- Snaps over extension ladder rail end caps
- Resists paints, stains, thinners and solvents
- For single and extension fiberglass and aluminum ladders
-
Features:
- Slip-resistant standing surface
- Durable aluminum construction
- Easily flips out of the way for safe climbing
- Rated 300 lb load capacity (evenly distributed)
- Designed for Werner MT series multi-ladders
-
Features:
- Wall-mounted hanger holds stepladders securely
- Industrial-strength coated steel wire construction
- Compact, lightweight design for easy installation
-
Features:
- Lightweight, sturdy, easy to use
- Designed for quick field adjustments
- Mounts on either side of the extension ladder
- 3-rung model; accepts stages up to 20 in width
- Platform Clamp System secures platform and ties supporting ladders together
- Recommended with Type IA (300 lb) and Type IAA (375 lb) ladders; OSHA/ANSI allow Type I (250 lb)
-
Features:
- Lightweight, sturdy, easy to use
- Designed for quick field adjustments
- Mounts on either side of an extension ladder
- 2-rung long body design; accepts stages up to 20 in width
- Platform Clamp System secures platform and ties supporting ladders together
- Use with Type IA (300 lb) or Type IAA (375 lb) ladders; OSHA/ANSI allow Type I (250 lb)
-
Features:
- Supports stages/planks up to 14 inches wide
- Lightweight, sturdy aluminum construction
- Designed for quick field adjustments
- Mounts on either side of an extension ladder
- Platform Clamp System secures platform and ties supporting ladders together
- Recommended with Type IA (300 lb) and Type IAA (375 lb) ladders; OSHA/ANSI allow Type I (250 lb)
-
Features:
- Supports stages or planks up to 14 inches wide
- Lightweight yet sturdy aluminum construction
- Mounts on either side of an extension ladder
- Designed for quick field adjustments
- Platform Clamp System secures platform and ties supporting ladders together
- Recommended with Type IA (300 lb) and Type IAA (375 lb) extension ladders; OSHA/ANSI allow use with Type I (250 lb)
-
$389.30
Features:
- Portable anchorage connector for underground mining and tunneling
- Installs directly inside 39 mm friction rock bolts
- Steel construction with silver finish
- Temporary anchorage; suitable for rock applications
-
$28.40
Features:
- Single-piece permanent roof anchor for new construction and future maintenance
- Stainless steel construction with corrosion resistance
- Designed as a 5,000 lb minimum breaking strength anchor
- Easy installation; leave-in-place design
-
$233.80
Features:
- Drop-through overhead anchorage connector with 12 in plate and 8.5 ft cable
- Rated 5,000 lb Minimum Breaking Strength
- Fits 1.75?6 in openings; attaches to concrete floors, steel girders, and grates
- 1/4 in thick steel plate with swivel ring for easy connection
- Meets ANSI Z359.18 and OSHA requirements
-
$233.80
Features:
- 5,000 lb minimum breaking strength
- Drops through 1.75?2 in overhead openings for secure anchorage
- 12 in square steel plate with 6 ft cable and swivel D-ring
- Suitable for concrete floors, steel girders, and grates
- Meets ANSI Z359.18 and OSHA requirements
-
$233.80
Features:
- 5,000 lb capacity overhead anchorage connector
- Designed to drop through 1.75 in to 6 in openings
- 1/4 in thick steel plate with 2 ft cable and swivel ring
- Attaches to concrete floors, steel girders, and grates
- Meets ANSI and OSHA standards
-
$233.80
Features:
- 5,000 lb capacity overhead anchorage connector
- Designed to drop through 1.75?6 in openings
- 1/4 in thick steel plate with 1 ft cable and swivel ring
- Use on concrete floors, steel girders, and grates
- Meets ANSI Z359.18 and OSHA standards
-
$233.80
Features:
- 5,000 lb capacity overhead anchorage connector
- Designed to drop through 1.75 in to 3 in openings
- 1/4 in thick steel plate with 8.5 ft cable and swivel ring
- Use on concrete floors, steel girders, and grates
- Meets ANSI Z359.18 and OSHA requirements
-
$233.80
Features:
- Designed to drop through 1.75?3 in overhead openings for secure anchorage
- 6 in square steel plate with 6 ft cable and swivel D-ring
- 5,000 lb minimum breaking strength
- Usable on concrete floors, steel girders, and grates
- Meets ANSI Z359.18 and OSHA requirements
-
$233.80
Features:
- Drop-through overhead anchorage connector for 1.75?3 in openings
- 6 in steel plate with 2 ft cable and swivel ring
- 5,000 lb Minimum Breaking Strength (MBS)
- Attaches to concrete floors, steel girders, and grates
- Meets OSHA and ANSI Z359.18 standards
-
$233.80
Features:
- 5,000 lb capacity overhead anchorage connector
- Designed to drop through 1.75?3 in openings
- 1/4 in thick steel plate with 1 ft cable and swivel ring
- Attaches to concrete floors, steel girders, and grates
- Meets ANSI Z359.18 and OSHA standards
-
$151.80
Features:
- 5,000 lb capacity overhead anchorage connector
- Designed to drop through 1.75?2 in openings
- 1/4 in thick steel plate with 8.5 ft cable and swivel ring
- Use on concrete floors, steel girders, and grates
- Meets ANSI Z359.18 and OSHA standards
-
$151.80
Features:
- Drop-through overhead anchorage connector
- 4-inch square steel plate with 6-foot cable
- Swivel D-ring connection
- Minimum Breaking Strength of 5,000 lb
- Suitable for concrete floors, steel girders, and grates
-
$151.80
Features:
- Drop-through anchorage fits 1.75?2 in openings
- 4 in steel plate with 2 ft cable and swivel ring
- 5,000 lb minimum breaking strength
- Attaches to concrete floors, steel girders, and grates
- Meets OSHA and ANSI Z359.18 standards
-
$817.00
Features:
- Adjustable to fit 20?59 in door or window frames
- Tool-free installation with damage-free clamping
- Durable aluminum construction with rubber-lined anchor pads
- Integrated D-ring connection point; rotating connection
- Meets ANSI Z359.18 and OSHA 1910.140/1926.502 standards
-
$98.80
Features:
- Weld-on steel puck mounts a 10K Mega-Swivel anchor
- 3 in diameter x 1 in thick puck with threaded center
- Includes welding puck, 5/8 in bolt, and lock washer
- Durable steel construction; gray finish
- Suitable for permanent anchorage installations
-
$310.10
Features:
- Designed to be welded into place
- 316 stainless steel construction
- Includes 5/8 in x 1.75 in bolt and internal tooth lock washer
-
$40.90
Features:
- Specially designed tool for setting expansion sleeves in concrete holes
- Durable steel construction
- Compatible with Werner Concrete Bolt anchorage systems
- Gray finish
-
$37.10
Features:
- Replacement bolts for 5K Stainless Steel Mega-Swivel
- Designed for concrete applications
- Stainless steel construction
- Pack of 10
-
$52.30
Features:
- Stainless steel replacement bolts for 5K Mega-Swivel (steel applications)
- Pack of 10 for maintenance and replacements
- Designed for Werner A5700 Series anchorage connectors
-
$392.80
Features:
- 5,000 lb minimum breaking strength
- 316 stainless steel construction
- 360-degree D-ring swivel for full range of motion
- Includes stainless steel concrete bolt
- Meets ANSI/OSHA standards for anchorage connectors
-
$353.40
Features:
- 5,000 lb rated stainless steel mega-swivel anchor
- D-ring swivel provides full range of motion
- Includes stainless steel bolt, lock washer, and nut
- Designed for steel applications
-
$253.00
Features:
- 316 stainless steel construction with 360-degree D-ring swivel
- 5,000 lb MBS for secure anchorage in steel or concrete applications
- No bolts included ? use A570003 (steel) or A570004 (concrete) replacement bolts
- Meets ANSI and OSHA standards
-
$321.00
Features:
- Portable, reusable anchor for parapet walls?no tools required
- Zinc plated steel construction for strength and durability
- Does not penetrate wall surface
- Meets ANSI and OSHA standards; 10,000 lb minimum breaking strength (per supplier)
-
$216.00
Features:
- Mobile I-beam anchorage that travels with the worker
- Fits beam flanges from 3.5 in to 14 in and 0.25 in to 1.25 in thick
- Single-sided adjustment for one-handed use
- Minimum Breaking Strength of 5,000 lb
- Meets OSHA and ANSI/ASSP Z359.18-2017 standards
-
$601.00
Features:
- Mobile anchorage slides along horizontal I-beams
- Fits I-beams 12?30 in wide and up to 2.5 in thick
- Lightweight aluminum construction
- Minimum Breaking Strength: 5,000 lb
- Meets ANSI and OSHA standards
-
$209.00
Features:
- Lightweight aluminum sliding anchor for I-beams
- Adjusts to fit beam flanges from 3-1/2 in to 14 in
- For beam thickness up to 1-1/4 in
- Smooth sliding action follows user movement
- Meets OSHA and ANSI standards
-
$266.00
Features:
- Corrosion-resistant galvanized steel construction
- Fastening holes for wood, concrete, or I-beam installation
- 16 in x 16 in x 3/8 in base plate for secure, permanent anchoring
- 360-degree loading direction; 5,000 lb minimum breaking strength
- Meets ANSI Z359.18-2017 and OSHA 1910.140/1926.502 requirements
