Showing 921–960 of 7316 resultsSorted by popularity
-
56% OFF
DISCONTINUED NO LONGER AVAILABLE – REPLACED BY DCN930P1
Features
- Stall release lever to reset driver blade in the event of a jam
- Adjustable rafter hook
- Easy access to the nosepiece for removal of jammed nails
- Dry fire lock out prevents tool from firing when nails are low
- 33° magazine holds up to 55 paper collated nails
-
23% OFF
Features
- DeWalt DCK4050M2 Combo Kit
- DCD805: 40% more power versus the DCD796B using DCB205 battery or DCBP034 DEWALT POWERSTACK battery (sold separately)
- DCF850: Brushless motor that delivers up to 1,825 in-lb of torque and 3,250 rpm for driving large-diameter screws
- DCS356: The DUAL-GRIP variable-speed trigger and 3-speed selector provide ultimate speed and application control, and the bright LED illuminates dark workspaces.
- DCS382: FAST CUTS: Rapidly saw through various materials with 1-1/8 in. stroke length
-
60% OFF
Features
- 3.0 joules of impact energy provides corded power without the cord.
- Optimized ergonomic design provides excellent control in all orientations
- Durable three mode German engineered mechanism
- Wide optimal drilling range between 1/4 in. and 3/4 in.
- Factory-set clutch reduces sudden, high-torque reactions if bit jams.
- Optimized ergonomic design provides an exceptional drilling and chipping experience in overhead, horizontal and downward orientations.
- Constant speed under load for fast speed of application
-
40% OFF
Features
- 13 Amp motor
- 9000 rpm no-load speed for applications with 6 in. grinder wheels
- Brake engages when trigger is released with stopping speeds of 1.5 seconds when using a standard grinding wheel (4-1/2 in. x 1/4 in. bonded abrasive wheel, non-hubbed)
- Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut the grinder off
- E-CLUTCH® activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor
- Up to 30% more power vs the DCG414 Grinder
-
31% OFF
![DeWalt DCLE34035D1 20V Max 360 Degree Remote Control Laser Kit [2.0 Ah] product image](https://www.heydensupply.com/wp-content/uploads/2024/10/DCLE340_thmbwb-600x600.jpg "DCLE340_thmbwb")
Features
- DCLE34035D1 features 9 hours of runtime per charge
- Remote-controlled operation
- Up to 260 ft. visible range
- Quick-head adjustment
- Drop alert detection
-
16% OFF
$3,089.48 Original price was: $3,089.48.$2,580.31Current price is: $2,580.31.
Features:
- Replaces RB441T
- Fastest Tying Speed
- Cost Saving – Uses Less Wire!
- Short Tie Height
- Easy Wire Loading
- Easy Handling
- Built To Last
-
8% OFF
$359.99 Original price was: $359.99.$329.89Current price is: $329.89.
Features
- 1.0HP, 115V/6.5A, 1Ø, UL & CUL Listed Electric Motor.
- Built-in Overload Protection.
- 2” (NPT) Female Discharge.
- Total Head: 40 ft.
- MAX Capacity: 79 gpm.
- Check out our pump(s) guide here.
-
-
$1,179.99
Features:
- 1.0 HP, 115V/6.8A, Single-Phase
- 2 in NPT female discharge
- Max capacity: 95 GPM; Total head: 45 ft
- Handles up to 1 in solids; Pumps liquid up to 120°F
- Cast iron housing and abrasion‑resistant impeller
- Built-in thermal overload protection
- Dual shaft seals and sealed ball bearings
- Carrying handle and molded power cable with strain relief
-
$259.99
Features:
- 14 ft flexible shaft assembly for Northrock concrete vibration systems
- Fits quick-disconnect style Northrock motors
- Includes shaft casing and greased core
- Rugged rubber-coated steel braiding with hardened inner liner
-
$659.99
Features:
- 2 HP, 15 amp electric motor for concrete vibration
- Durable cast aluminum housing dissipates heat
- Shock-absorbing frame with protected power switch
- Watertight, strain-relief power cord
- Drives heads up to 2.5 in diameter (shafts & heads sold separately)
-
$129.99
Features:
- 1 in steel head for concrete vibration
- Fits standard and pencil flexible shafts
- High-performance eccentrics
- Lubricated with synthetic oil; maintenance-free
- Made in USA; lifetime warranty
-
$22.99
Features:
- 3 in. wheel diameter with 5/8 in.-11 arbor
- Stainless steel knotted wire, single-row cup brush
- For heavy-duty cleaning on small/mini angle grinders
- Removes weld scale, burrs, and corrosion; prepares surfaces for paint
- Precision-balanced cup reduces vibration
-
$4.49
Features:
- Type 27 depressed-center grinding wheel for metal grinding
- 4-1/2 in diameter, 1/4 in thickness with 5/8-11 hub arbor
- 30-grit aluminum oxide for high-tensile materials
- Optimized for flat-surface weld prep; best used at ~30° angle
- Fits small angle grinders
-
$10.59
Features:
- Type 1A (ISO 41) straight cutting wheel for small angle grinders
- 24-grit aluminum oxide for fast cutting on high-tensile metals
- Designed for cutting only; use at 90-degree angle
- 4-1/2 in. diameter, 7/8 in. arbor, 3/32 in. thickness
- Suitable for steel, non‑ferrous metals, pipes, and profiles
-
$849.00
Features:
- Complete kit with LR20 receiver, tripod, grade rod, remote, wall mount, target, glasses, and hard case
- Electronic self-leveling with disturbance monitor for consistent accuracy
- ±1/16 in. accuracy at 100 ft and up to 2,000 ft working range with receiver
- Manual Dual Slope adjustment on X- and Y-axes
- Durable design with red metal cage and IP56 rating
-
$599.00
Features:
- All-in-one 360° three-plane leveling and alignment with one horizontal and two vertical green-beam lines
- Power flexibility: runs on included 12V Max Li-ion battery or AA batteries (adapter included)
- Bluetooth connectivity for remote setup and brightness control via Bosch Leveling Remote App
- IP65-rated housing with rubber overmold and grip base for jobsite durability
- Range up to 100 ft (330 ft with receiver) and ±1/8 in accuracy at 30 ft
- Smart Pendulum self-levels, indicates out-of-level, and locks for transport
- Includes battery, charger, DK20 ceiling clip, magnetic L-bracket, target plate, AA adapter, and hard case
-
$439.00
Features:
- 6.1 ft-lbs impact energy for fast drilling and chiseling
- SDS-max bit system enables tool-free, one-handed bit changes
- Vario-Lock with 12 chisel positions to optimize working angle
- Dual-mode selector for rotary hammer or hammer-only
- Service minder brushes indicate when maintenance is needed
- Includes auxiliary handle, grease tube, and carrying case
-
$38.98
Features:
- Four-cutter carbide-tipped head for hitting rebar and reducing bit lock-up
- Delivers up to 2X life in concrete with rebar vs. 2-cutter bits
- Four-flute design efficiently removes dust from the hole
- SDS-plus shank for use with SDS-plus rotary hammers
-
$869.99
Features
- Press 1/2″ to 1″ carbon steel (black iron pipe) press fittings
- Easy actuation design optimized for one handed use
- Galvanized finish to defend against corrosion and rust build up
-
$3,755.57
- Tie up to #14 x #14 with 19ga wire
- Up to 4,100 ties per charge
- Uses 19 gauge TW1061T series wire
-
$75.99
Features
- SD9212R500 is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
$53.99
Features
- SD9112R500 is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
$293.99
Features
- SD9112MB is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
$18.99
Features
- EIF-EZ positive connection eliminates messy leakage, minimizing waste and clean-up
- No drilling of ports
- Disconnect fitting from the E-Z-Click port and the epoxy stops flowing, no leaky mess.
Injection Guide
-
14% OFF
$65.99 Original price was: $65.99.$56.99Current price is: $56.99.
Features
- QDEXTG3-22 offers an ergonomic Design
- Increased Efficiency
- Versatile Application
- Quality Construction
Quik Drive Resources
-
$45.99
Features
- QDDECKCLIP-RC fits all Quik Drive attachments with removable noseclips (PRO250, PRO300S, PRO200).
- Efficient Alignment
- Secure Fastening
- Time-Saving
Quik Drive Resources
-
$38.99
Features
- K622-011 meets NEW ANSI Z308.1 Standard
- Back plates are color coded which makes it simple to see what product is missing
- Single-use packaging ensures uncontaminated product for treating injuries
- Weatherproof Plastic Box With Wall Mounting Handle/Hanger
-
$98.99
Features
- Type 17 point to reduce pre-drilling while engaging rapidly with the project material, helping to prevent splitting
- Countersinking bugle head prevents heads from popping out, leaves smooth finish
- Feature a proprietary polymer coating that protects the fastener against corrosive elements
- LP212STBK comes in a 25 lb bucket
-
-
-
13% OFF
$2,427.99 Original price was: $2,427.99.$2,123.99Current price is: $2,123.99.
Features
- DCE210D2 has a compact inline design for efficient one-handed jaw actuation
- Press up to 2″ Copper, Stainless-Steel, and Carbon Steel (Black Iron Pipe) press fittings
- 180° rotaing head to obtain optimal press angle
- Bright LED illumination of entire press location
- Compatible with Tool Connect software
DeWalt DCE214K 1/4″ to 7/8″ Compact NIBCO Press ACR Press Jaw Kit
-
$24.99
Features
- Work comfortably on long days with high-density foam, a protective gel zone, and swiveling buckles
- Wear comfortably and get a precise fit with an extra wide single strap and a quick-release elastic strap
- Take on tough jobsites with durable 1680 denier fabric for strength and abrasion resistance
- Protect your knees during strenuous, repetitive tasks with DEWALT DWST590014 Flooring Knee Pads with Gel
-
$106.99
Features
- Carbide teeth for long life in material
- Ejection spring for easy plug ejection
- Raised shoulder helps prevent break through
- Optimized tooth design for fast drilling speed
- Optimized pilot bit for long life in metal
-
$10.99
Features
- Tempered, carbon-steel blade with long lasting edge
- Durable construction with lacquered blade to help protect against corrosion
- Thick metal strike cap with flat surface for effective strikes
- Lightweight design with ergonomic handle for comfort and precision
- Limited Lifetime Warranty
-
$11.99
Features
- Tempered, carbon-steel blade with long lasting edge
- Durable construction with lacquered blade to help protect against corrosion
- Thick metal strike cap with flat surface for effective strikes
- Lightweight design with ergonomic handle for comfort and precision
- Limited Lifetime Warranty
-
$14.99
Features
- Tempered, carbon-steel blade with long lasting edge
- Durable construction with lacquered blade to help protect against corrosion
- Thick metal strike cap with flat surface for effective strikes
- Lightweight design with ergonomic handle for comfort and precision
- Limited Lifetime Warranty
-
$13.99
Features
- DWHT16860 features a tempered, carbon-steel blade with long lasting edge
- Durable construction with lacquered blade to help protect against corrosion
- Thick metal strike cap with flat surface for effective strikes
- Lightweight design with ergonomic handle for comfort and precision
- Limited Lifetime Warranty
-
Features
- DISCONTINUED – REPLACED BY DWHT56158
- DWHT56148 features a concentrated strike face for superior impact.
- Improved handle durability with overstrike protection where handles break most.
- Over-mold textured grip helps to improve comfort and control
- Durable head with forged medium-carbon steel construction
- Lightweight fiberglass handle that can withstand tough environments
