Showing 921–960 of 7316 resultsSorted by popularity
-
$129.99
Features:
- 1 in steel head for concrete vibration
- Fits standard and pencil flexible shafts
- High-performance eccentrics
- Lubricated with synthetic oil; maintenance-free
- Made in USA; lifetime warranty
-
$849.00
Features:
- Complete kit with LR20 receiver, tripod, grade rod, remote, wall mount, target, glasses, and hard case
- Electronic self-leveling with disturbance monitor for consistent accuracy
- ±1/16 in. accuracy at 100 ft and up to 2,000 ft working range with receiver
- Manual Dual Slope adjustment on X- and Y-axes
- Durable design with red metal cage and IP56 rating
-
$599.00
Features:
- All-in-one 360° three-plane leveling and alignment with one horizontal and two vertical green-beam lines
- Power flexibility: runs on included 12V Max Li-ion battery or AA batteries (adapter included)
- Bluetooth connectivity for remote setup and brightness control via Bosch Leveling Remote App
- IP65-rated housing with rubber overmold and grip base for jobsite durability
- Range up to 100 ft (330 ft with receiver) and ±1/8 in accuracy at 30 ft
- Smart Pendulum self-levels, indicates out-of-level, and locks for transport
- Includes battery, charger, DK20 ceiling clip, magnetic L-bracket, target plate, AA adapter, and hard case
-
$439.00
Features:
- 6.1 ft-lbs impact energy for fast drilling and chiseling
- SDS-max bit system enables tool-free, one-handed bit changes
- Vario-Lock with 12 chisel positions to optimize working angle
- Dual-mode selector for rotary hammer or hammer-only
- Service minder brushes indicate when maintenance is needed
- Includes auxiliary handle, grease tube, and carrying case
-
$38.98
Features:
- Four-cutter carbide-tipped head for hitting rebar and reducing bit lock-up
- Delivers up to 2X life in concrete with rebar vs. 2-cutter bits
- Four-flute design efficiently removes dust from the hole
- SDS-plus shank for use with SDS-plus rotary hammers
-
$869.99
Features
- Press 1/2″ to 1″ carbon steel (black iron pipe) press fittings
- Easy actuation design optimized for one handed use
- Galvanized finish to defend against corrosion and rust build up
-
$3,755.57
- Tie up to #14 x #14 with 19ga wire
- Up to 4,100 ties per charge
- Uses 19 gauge TW1061T series wire
-
$75.99
Features
- SD9212R500 is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
$53.99
Features
- SD9112R500 is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
$293.99
Features
- SD9112MB is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
$18.99
Features
- EIF-EZ positive connection eliminates messy leakage, minimizing waste and clean-up
- No drilling of ports
- Disconnect fitting from the E-Z-Click port and the epoxy stops flowing, no leaky mess.
Injection Guide
-
14% OFF
$65.99 Original price was: $65.99.$56.99Current price is: $56.99.
Features
- QDEXTG3-22 offers an ergonomic Design
- Increased Efficiency
- Versatile Application
- Quality Construction
Quik Drive Resources
-
$45.99
Features
- QDDECKCLIP-RC fits all Quik Drive attachments with removable noseclips (PRO250, PRO300S, PRO200).
- Efficient Alignment
- Secure Fastening
- Time-Saving
Quik Drive Resources
-
$38.99
Features
- K622-011 meets NEW ANSI Z308.1 Standard
- Back plates are color coded which makes it simple to see what product is missing
- Single-use packaging ensures uncontaminated product for treating injuries
- Weatherproof Plastic Box With Wall Mounting Handle/Hanger
-
$98.99
Features
- Type 17 point to reduce pre-drilling while engaging rapidly with the project material, helping to prevent splitting
- Countersinking bugle head prevents heads from popping out, leaves smooth finish
- Feature a proprietary polymer coating that protects the fastener against corrosive elements
- LP212STBK comes in a 25 lb bucket
-
-
-
13% OFF
$2,427.99 Original price was: $2,427.99.$2,123.99Current price is: $2,123.99.
Features
- DCE210D2 has a compact inline design for efficient one-handed jaw actuation
- Press up to 2″ Copper, Stainless-Steel, and Carbon Steel (Black Iron Pipe) press fittings
- 180° rotaing head to obtain optimal press angle
- Bright LED illumination of entire press location
- Compatible with Tool Connect software
DeWalt DCE214K 1/4″ to 7/8″ Compact NIBCO Press ACR Press Jaw Kit
-
$106.99
Features
- Carbide teeth for long life in material
- Ejection spring for easy plug ejection
- Raised shoulder helps prevent break through
- Optimized tooth design for fast drilling speed
- Optimized pilot bit for long life in metal
-
$10.99
Features
- Tempered, carbon-steel blade with long lasting edge
- Durable construction with lacquered blade to help protect against corrosion
- Thick metal strike cap with flat surface for effective strikes
- Lightweight design with ergonomic handle for comfort and precision
- Limited Lifetime Warranty
-
$11.99
Features
- Tempered, carbon-steel blade with long lasting edge
- Durable construction with lacquered blade to help protect against corrosion
- Thick metal strike cap with flat surface for effective strikes
- Lightweight design with ergonomic handle for comfort and precision
- Limited Lifetime Warranty
-
$14.99
Features
- Tempered, carbon-steel blade with long lasting edge
- Durable construction with lacquered blade to help protect against corrosion
- Thick metal strike cap with flat surface for effective strikes
- Lightweight design with ergonomic handle for comfort and precision
- Limited Lifetime Warranty
-
$13.99
Features
- DWHT16860 features a tempered, carbon-steel blade with long lasting edge
- Durable construction with lacquered blade to help protect against corrosion
- Thick metal strike cap with flat surface for effective strikes
- Lightweight design with ergonomic handle for comfort and precision
- Limited Lifetime Warranty
-
Features
- DISCONTINUED – REPLACED BY DWHT56158
- DWHT56148 features a concentrated strike face for superior impact.
- Improved handle durability with overstrike protection where handles break most.
- Over-mold textured grip helps to improve comfort and control
- Durable head with forged medium-carbon steel construction
- Lightweight fiberglass handle that can withstand tough environments
-
$29.99
Features
- DWHT65103 features black chrome plating
- MAX FITtips engineered to provide better contact with fasteners
- High-durability S2 steel bar
-
$60.99
Features
- 15 Degree offset for knuckle clearance
- Long panel forging for reach and leverage
- Knurled panel rings provide a non-slip gripping surface
- Provides stamped markings for easy wrench size identification
-
9% OFF
$170.99 Original price was: $170.99.$155.99Current price is: $155.99.
Features
- 13 degree offset box end for knuckle clearance
- Increased range of arc swing in tight spaces
- DWMT19234 features DirectTorque Technology
- Full Lifetime Warranty
-
$28.99
Features
- Extra-wide chisel blade for cleaner cuts to brick and masonry
- 1 pc. steel construction for durability and long life
- Ergonomic grip designed for comfort
- Manufactured by DEWALT
-
$30.99
Features
- large milled strike face
- Balanced design with extended claw
- Remove finish nails, framing nails, and staples
- Durable, one-piece steel construction with thick, heat-treated steel shaft
- 5x more durable grip for secure, anti-slip handling in a range of worksite settings
-
$89.99
Features
- DWMT45424 is built for tight spaces – get into tight spaces with a low-profile ratchet design and a 20% thinner head
- tighten and loosen fasteners with ease with sockets featuring direct torque technology
- Professional grade durability – complete tough applications with a chrome vanadium steel construction that provides strength and durability
- Excellent maneuverability – maneuver in restricted areas with a 72-tooth ratchet that offers a 5-degree arc swing
-
$284.99
Features
- The Power of Corded with the Flexibility of cordless
- 4X The Runtime of DCB201 1.5Ah Battery
- 3X The Power of DC9096 18V Battery
- Tri-Platform compatibility with 20V MAX*, 60V MAX* and 120V MAX*
- Durable construction with single piece cell holder
-
$113.99
Features
- DWACPRIR offers 4x Faster Cuts
- Minimize Cutting Effort
- Quick-Change Brace
- Multi-Brand Compatibility
- Full-Range Cut Capacity
-
$363.99
Features
- Reduce noise disturbances with up to 57% quieter operation
- Industry’s highest rated max torque hydraulic impact driver
- Up to 40% faster driving – drive large screws quickly and finish jobs fast.
- The new DCF870E1 provides consistent performance in demanding applications and performs in cold temperatures
- Complete framing, cabinetry, and other applications in tight areas with an ergonomic design
-
$388.99
Features
- Bright Led Control Screen
- lift-load capacity of up to 265 lbs. MAX
- Versatile Performance
- Built-In Pressure Sensor
- Audio Alarm
-
$630.99
Features
- Secondary Foregrip Trigger
- Larger Cut Capacity for More Variety in Applicable Materials
- Powerful Brushless Motor
- Integrated Blade Guard
- Variable Speed Trigger and Dial
-
16% OFF
$686.99 Original price was: $686.99.$577.07Current price is: $577.07.
Features
- PRO200SG2C2K is offers self-locking depth adjustment for consistent fastener drive depth
- Lightweight G3 extension for better ergonomics
- Powerful DeWalt cordless driver motor
- The collated strips are also pointed on the inserted end to simplify loading
Fastening System Resources
-
-
$899.99
Features
- GFCI protected, offering stable power and parallel capability
- Speed Regulation Switch, Fuel Gauge, Low Oil Indicator, and Automatic Shut-off
- Covered receptacles
- Parallel connection sockets
- EPA & CARB Certified
-
![TW1061T-USA [Roll]](https://www.heydensupply.com/wp-content/uploads/2020/11/TW1061T-1000x1000-1-600x600.jpg "TW1061T-USA [Roll]")
Features:
- Full pallet 48 Cases Tie Wire
- Buy from an authorized Max USA Master Distributor
- Annealed steel wire – diameter 1.0mm
- For use with MAX RB441T, RB443T TwinTier, RB611T, and RB401T-E TwinTier
