Showing 761–800 of 7316 resultsSorted by popularity
-
$235.99
Features:
- Industrial-grade design for high-speed, high-volume framing
- Lightweight with ergonomic balance for comfort and control
- Recoil-dampening engine system helps minimize recoil
- Supports 30° paper tape clipped and full round head nails
- Selectable bump and sequential firing modes
-
$249.00
Features:
- PROFACTOR performance delivers corded-like power in a cordless 18V blower.
- BITURBO Brushless Technology with axial fan exceeds 450 CFM and reaches 123 MPH.
- Air speed control wheel with multiple settings for power, noise, and runtime.
- Trigger lock-on keeps blower on while allowing speed adjustments.
- Low noise operation at 64 dB and ergonomic, lightweight 6.6 lb design.
- Easy assembly twist-and-click nozzle and hanger slot for storage.
-
$18.99
Features
- SD10212R100-R is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
$314.99
Features
- MTLD-R2 is OSHA compliant for safety
- Durable & Corrosion-Resistant
- Fast & Efficient Installation
- Versatile Load-Rated Performance
-
$155.99
Features
- CPFH09KT can be dispensed with a standard caulking tool
- Can also be used on dry cracks if water is introduced
- Expands to fill voids and seal the affected area
- Fast reacting — reaction begins within 1 minute after exposure to moisture
Injection Guide
-
$91.99
Features
- 17137 meets requirements for ANSI Z308.1-2009
- Wall mountable.
- 50 Person
- Metal Box
-
$103.99
Features
- Tapered, countersinking head compresses the surface of the material as it is driven
- Star drive head reduces bit spinout
- Star drive head reduces bit spinout
- LP114STBK comes in a 25 lb bucket
-
-
$73.99
Features
- Optimized Tooth Design For Fast Metal Drilling Speeds
- Ejection Spring For Easy Plug Removal
- Raised Shoulder Helps To Prevent The Drill From Breaking Through The Material When Hole Is Complete
- Thin Walled Design Provides Optimum Metal Drilling Efficiency
-
$20.99
Features
- DW5952 features a fully hardened steel body delivers increased life and durability
- For light chipping and chiseling of tile, mortar, glazing compounds, and other masonry products
- Scaling chisel (wide chisel) is used for removing tile, concrete splatter, and other excess material
- Manufactured by DEWALT
-
$2,499.99
Features
- DCE210D2K features a compact inline design for efficient one-handed jaw actuation
- Press up to 2″ Copper, Stainless-Steel, and Carbon Steel (Black Iron Pipe) press fittings
- 180° rotating head to obtain optimal press angle
- Bright LED illumination of entire press location
- Tool Connect software to automatically track tools and equipment
-
$21.99
Features
- Smooth swing with balanced design for enhanced utility
- 5x More durable grip* for secure, anti-slip handling in a range of worksite settings
- Seamless toe-nailing: Sleek, shield-shaped strike face for finish work
- Built for long life: Durable, one-piece steel construction with thick, heat-treated steel shaft
- Tri-pull technology for versatility: Remove finish nails, framing nails, and staples
-
$18.99
Features
- Smooth swing with balanced design for enhanced utility
- DWHT51001 features a 5x More durable grip* for secure, anti-slip handling in a range of worksite settings
- Built for long life: durable, one-piece steel construction and matte black finish with thick, heat-treated steel shaft
-
$87.99
Features
- Fiberglass resin shell withstands radiant temperatures up to 350° F
- Smooth dome shape with exposed rivets is popular in Construction, Industry and Metalworking
- 8-Point riveted textile suspension for increased comfort and force displacement
- Durable wheel adjustment system for one hand size adjustments
- Soft, non-chaffing, EVA moisture management sweatband padding for maximum sweat absorption
-
$53.99
Features
- Easily connects to the components in an auto-feed system
- Minimizes user fatigue while maximizing productivity
-
Features
- Made to order product, estimated ship time is 1-2 weeks.
- E1100 offers versatility
- Precision
- Customization
-
$96.99
Features
- Includes a large bucket with rollers and grate
- Includes an Ultra Grouting System Floor Sponge
- Cuts grouting time nearly in half
-
$55.35
Features
- Quality diamond blade with economical cutting value
- Sintered blade segment
- Diamond depth of .440” (11mm)
- Segment height of .540” (14mm)
-
$373.00
Features
- HS2.4S has a built-in shaft mounted agitator suspends solids.
- Urethane Semi Vortex Impeller for maximum durability and pump performance.
- Dual inside mechanical seal with SiC faces for longer life.
- Oil Lifter provides lubrication of the seal faces. (Patented)
- V-Ring Seal design protects mechanical seal from abrasive particles.
-
$235.69
Features
- Quick and easy installation
- 3PB is made of durable noncorrosive plastic
- No tools required
-
$599.00
Features
- LED Work Light with 20 second delay
- Tool less blade changing lever loosens blade tension for easy blade changes
- Variable Speed for versatility and control
- 5″ Cutting Capacity
-
$227.99
Features
- The Makita XBU07Z18V; 3-tools-in-1: blower, vacuum and mulcher for convenient clean-up
- 10:1 mulch ratio reduces up to 10 bags of leaves down to 1 bag with shredding blade
- Makita-built brushless motor delivers up to 148 CFM and 143 MPH of blowing force
- Brushless motor delivers up to 215 CFM and 13″ water lift of suction power
XBU07 Instruction manual
-
$8.09
Features
- Soft, foam filled, padded earcups fit securely and comfortably over the ear
- Lightweight, durable construction
- Dielectric design
- Adjustable headband
- Wear over earplugs for additional protection
-
$44.99
Features
- 12-1/2″ cleaning path for increased efficiency
- Low profile design for hard to reach spaces
- Designed for universal use on carpet and hard floors
- Swivel joint with wheels for increased maneuverability
- For use with Makita 18V Compact and Backpack Vacuums
-
$13.99
Features
- Ergonomic shape for maximum comfort
- Installs quickly and easily for added user convenience
- High quality materials for long life
- For use with Makita 18V X2 Backpack Vacuum models XCV17 and XCV22
-
$212.99
Features
- Makita XSA01Z uses a Makita-built brushless motor delivers up to 447 MPH and 39 CFM
- 4 digitally controlled speeds for a wide range of applications
- 5 nozzles included for a wide range of applications
- Built-in L.E.D. light illuminates the work area
- Up to 55 minutes of run time with 18V LXT 6Ah battery (battery not included)
-
27% OFF
$66.88 – $91.29Price range: $66.88 through $91.29
Features
- RWG28 features acrylic inner liner
- 13 gauge high gray nylon shell with a black sandy foam latex coating
- Seamless elastic slip-on cuff
- Tested to ANSI/ISEA Cut Level A2
- Tested to EN388 standards for abrasion, cuts, tear and puncture (2 2 3 2 X)|Contains Latex
-
$48.09
Features
- Blended nylon/spandex shell
- Micro-Foam nitrile palm dip
- Anti-slip nitrile dotted coating
- Elastic slip-on cuff
- Meets EN 388:2003 standards for abrasion, cuts, tear and puncture (4 1 2 1)
-
![AC001GM1 40V max XGT Brushless Cordless 2 Gallon Quiet Series Compressor Kit [4.0Ah] product image](https://www.heydensupply.com/wp-content/uploads/2023/05/28918c73-b717-4ca7-b0d0-0a57e3ff410d_ac001gz_b_1500px-600x600.jpg "28918c73-b717-4ca7-b0d0-0a57e3ff410d_ac001gz_b_1500px")
$741.99
Features
- Makita AC001GM1 Drives up to 700 finish nails using a fully charged 40V XGT® 4.0Ah battery
- Quiet Series designed with low noise emission at only 68 dB; ideal for indoor use
- Lightest weight cordless compressor in its class; up to 10 lbs. lighter*
- Up to 20% faster refill time from empty to full*
- Drives up to 1,400 finish nails using a fully charged 40V XGT® 8.0Ah battery (8.0Ah battery not included)
-
$95.59
Features
- APGP1212 offers strength & style.
- Heavy-duty construction.
- Easy Installation.
- Versatile design.
-
$155.89
Features
- Designed to meet stringent building codes for seismic or high-wind events
- APB1010 features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APBDSP)
-
$95.59
Features
- APVGP812 provides reinforcement to connections
- Modern design
- Versatile sizing
- Superior durability
- Enhanced corrosion resistance
-
$46.29
Features
- APVB66 is designed for a secure and adjustable installation
- Superior Corrosion Resistance
- Moisture Protection
- Heavy-Duty Strength
-
$95.59
Features
- APGP812 offers a strong & durable construction
- Corrosion resistant
- Decorative design
- Easy installation
-
4% OFF
$164.99 Original price was: $164.99.$158.39Current price is: $158.39.
Features
- DCC020IB features three power sources for on the go [20V MAX battery, 12V DC, or 110V AC]
- Convenient onboard accessory storage
- Heavy-duty rubber feet help reduce walking when in use
- Threaded chuck for secure connection to inflation valve
- High-pressure inflation mode with automatic shutoff
DCCO20IB Instruction Manual
-
$347.99
Features
- Simultaneous Charger: All Ports Charge At The Same Time
- Charges 12V MAX*, 20V MAX*, and FLEXVOLT® 20V/60V MAX* Batteries
- 8 Amps Output Per Port (simultaneously)
- Charges (4) DCB204 battery in 40 mins
- Side Brackets To Mount Onto The ToughSystem™ Rails
-
4% OFF
$457.99 Original price was: $457.99.$439.67Current price is: $439.67.
Features
- access tight corners with the DCF620CM2’s slim nose /removable shoe
- lock-on feature enables fast installation of collated drywall screws
- Full 360° rotation allows users to choose best positioning
- Detent marks allow for easy and clear setup for varying screw lengths
- fine-depth adjustment allows for consistent screw installation at varying depths
DCF620CM2 Instruction Manual
-
$178.99
Features
- Push-button temperature control (122 – 1,202°F) for precise control over a wide variety of applications with LCD temperature reading
- Slide switch sets three air flow settings (cooling, low, high) for greater versatility
- Push-button temperature control increases by 50°F increments for exact temperature adjustment
- Compact 2.0 lb. design features a rubberized pistol grip handle and an integrated rear stand
- Ideal for vehicle wraps and tinting, stripping lacquer, paint and varnish, thawing frozen pipes, loosening tile and putty, re-melting adhesive, removing stickers, waxing and de-waxing, bending plastic pipes and sheets, and more
-
![West Chester HVY5555
Pigskin Leather Palm Glove with Nylon Hi-Vis Back and Thermal Lining -
Rubberized Safety Cuff [1 dozen] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/HVY5555-UP-600x600.jpg)
$137.19
Features:
- Top Grain Pigskin leather construction provides great breathability due its porous texture, becomes softer with use and withstands moisture without stiffening
- Top Grain leather is smooth, provides durability and dexterity
- Natural thermal lining provides excellent insulation without the bulk of fleece.
- Gunn cut pattern delivers excellent durability, wear and comfort, especially for heavier gloves
- Wing thumb increases comfort in open-handed work
- Fabric back provides breathability and flexibility
- Elastic closure sewn inside glove for safety and comfort
- Leather finger tips for extra protection
- Rubberized fabric safety cuff helps protect wrist, allows for fast removal, and water resistance
- Hi-Vis coloring makes this product very easy to see
-
![PIP 994KP Premium Top
Grain Pigskin Leather Drivers Glove with Thermal Lining - Keystone Thumb [1
dozen] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/994KP-UP-600x600.jpg)
$101.39
Features:
- Top Grain Pigskin leather construction provides great breathability due its porous texture, becomes softer with use and withstands moisture without stiffening
- Top Grain leather is smooth, provides durability and dexterity
- Natural thermal lining provides excellent insulation without the bulk of fleece.
- Drivers gloves feature slip-on styling to provide good fit and comfort
- Keystone thumb is ergonomic, reduces hand fatigue, offers superior dexterity and durability
- Elastic closure sewn inside glove for safety and comfort
- Color coded hems for easy size identification
