Showing 81–120 of 120 results
-
Special Order Shipping
$269.60
Features
- Variable speed trigger allows operator to adjust speed of cut during use
- Cuts up to 5/8-in fiber cement board
- LED light with 20 second delay after trigger release
- Little to no dust created during cutting action
-
Special Order Shipping
$277.71
Features
- Variable speed trigger with 0-3000 SPM provides blade control and fast cutting speeds
- 1-1/8-In stroke length delivers a fast cutting speed
- Keyless lever-action blade clamp for quick and easy blade changes
- 20V MAX; Maximum initial battery voltage (measured without a workload) is 20 volts; nominal voltage is 18
- POWER DETECT Tool Technology detects high-capacity batteries to maximize tool output
-
Special Order Shipping
$288.61
Features
- Only 5 lbs. (Tool Only)
- Compact 14..5 IN. length fits in between studs and in other tight spots
- Keyless 4-Position Blade Clamp for quick & easy blade chanes and cutting versatility
- 1-1/8 IN. stroke length
- Variable speed trigger delivers up to 2,900 SPM
-
Special Order Shipping
$366.26
Features
- Up to 19% more power vs the DCS388**
- Power of corded with the freedom of cordless
- 0 – 3000 SPM and 1-1/8 in. stroke length for fast and efficient cutting
- Keyless lever-action blade clamp for quick and easy blade changes
- Variable-speed trigger allows user to instantly control speed
-
Special Order Shipping
$333.80
Features
- Greater speed than DW272 corded screwgun with up to 4,400 RPM
- DEWALT built brushless motor for efficient performance and runtime
- Nosecone locks on securely and is easily removed while maintaining consistent screw depth
- Compatible with the DCF6201 Collated Magazine Attachment
- Illuminate dark work areas and increase visibility with the LED
-
Special Order Shipping
$110.45
Features
- Dual speakers for rich stereo sound
- Bluetooth® connectivity – 100ft range
- Convenient carry handle with phone holder
- Bass reflex port enhances low-frequency performance
- Play/pause, skip tracks, and control volume from speaker
-
Special Order Shipping
$187.83
Features
- Dual 3.5 in. woofers and 1 in. tweeters for stereo sound
- Heavy-duty roll cage with antenna slot for josbite durability and protection
- Bluetooth connectivity up to 100 ft. away for music streaming
- AM/FM radio with 6 presets to customize to your favorite stations
- USB power port for device charging
-
Special Order Shipping
$277.77
Features
- Dewalt DCR025 is able to be powered by 20V MAX* and FLEXVOLT® 20V/60V MAX* batteries, as well as AC power cord
- 3 AMP charging of 20V MAX and 60V MAX DEWALT Batteries when unit is plugged into AC power
- Bluetooth connectivity up to 100 ft
- 2 Additional AC power outlets
- Auxillary & 2.1 AMP USB Charging Ports
-
Special Order Shipping
$136.62
Features
- LCD display allows user to adjust temperature within 50-degree increments
- Built-in overload protection shuts the heating element down and prevents burn up
- Built-in hang ring adds a convenient storage feature
- Cord protector keeps the cord from tearing away from the housing
- Built-in innovative kickstand support provides greater stability and prevents tip over
-
Special Order Shipping
$234.21
Features
- 6.5 amp, 10,000 rpm motor provides power for working in the hardest woods
- Dual rack and pinion fence ensure blade and fence are always parallel for accurate joints every time
- Integral one-piece fence is adjustable and tilts 0-90°
- Flush cuts can be made at 0° without removing fence
- 45-degree locating notch in fence allows indexing off the outside surface of a mitered joint
-
Special Order Shipping
$1,883.85
Features
- High-performance brushless motor delivers FLEXVOLT® cordless power for long runtime in demanding applications without the hassles of power cords.
- Anti-rotation E-Clutch™ system is a Perform & Protect™ feature increases user control
- 9.0AH oil-resistant glass-filled nylon battery housed in a latched and sealed battery box for added protection from cutting oils.
- Patent pending pipe clamp depth gauge for quick set up.
- Use clamp with die arm for no direct contact with die head to start threads.
-
Free Shipping
$199.70
Features
- Brushless motor for efficient performance and runtime
- Wide variable speed range with dedicated High and Low settings helps optimize usage in light- and heavy-gauge substrates
- Four dedicated tool modes enable operation of tool in Trigger Mode (High Speed), Trigger Mode (Low Speed), PushStart Mode, and Lock-On Mode
- Top-mounted electronic mode select enables fast, one-handed switching between the tool’s four modes
- Tool Connect CHIP READY: Chip pocket accepts Tool Connect™ Chip DCE042 and connects with Tool Connect™ Site Manager app for easy asset management on the jobsite. (DCE042 sold separately)
-
Special Order Shipping
$12.99
Features
- Stamped-in contrasting color graduations for better readability
- Extra-thick extruded aluminum body holds up to heavy-duty use, ideal for use as saw guide
- Large base helps provide better grip on materials
- Scribe line notches for marking rip cuts
-
Special Order Shipping
$22.83
Features
- Stamped-in contrasting color graduations for better readability
- Extra-thick extruded aluminum body holds up to heavy-duty use, ideal for use as saw guide
- Large base helps provide better grip on materials
- Scribe line notches for marking rip cuts
-
Standard Shipping
$125.99
Features
- Bit extracts dust while drilling for less dust, fast holes and fast adhesive anchor installation
- Y-cutter carbide design for exact positioning, perfect starting & maximum durability
- Connects directly to DeWalt’s airlock system forming a secure, locking connection between bit and dust extractor
- Part of DEWALT’s complete cordless anchoring solution
-
Standard Shipping
$135.89
Features
- Bit extracts dust while drilling for less dust, fast holes and fast adhesive anchor installation
- Y-cutter carbide design for exact positioning, perfect starting & maximum durability
- Connects directly to DeWalt’s airlock system forming a secure, locking connection between bit and dust extractor
- Part of DEWALT’s complete cordless anchoring solution
-
Standard Shipping
$39.00
Features
- Impressive self retracting feature
- Combines features of long tape with convince of spring retracting hand tape
- 11 Ft. blade standout
- Cushion grip is slip resistant
- 1-1/4 in wide blade for easy readability
-
Standard Shipping
$139.00
Features
- Cordless angle grinder delivers 8,000-RPM for high-power cutting and grinding applications
- Quick-change™ wheel release allows for tool free wheel changes without the need for a wrench
- Tool-free guard allows for quick, easy guard adjustments/positioning
- 2-finger trigger switch with lock-off button for convenient activation and easier gripping
- 2-position side handle provides greater control, comfort and versatility when in use
- 20-volt rechargeable battery required (battery and charger sold separately)
- 2-position side handle offers greater control, comfort and versatility
-
Standard Shipping
$99.00
Features
- 360-Degree Handle For Multiple Orientation Use
- Powerful Brightness at 2,000-Lumen Output
- Natural Daylight Hue
- IP54 Rated – Water and Dust Ingress Protection
- Compact and lightweight at only 3-lbs. (tool only)
- Tripod Mountable – 5/8-in-11 and 1/4-in-20
-
Free Shipping
$551.99
Features
- For comfortable use when working in tight spaces with compact and lightweight design
- LED work light
- Helps Prevent Overtightening and Fastener run off with Precision Wrench control
- 4 speed settings and a variable speed trigger
- 600 ft-lbs of max fastening torque and 800 ft-lbs of max breakaway torque
-
Free Shipping
$406.00
Features
- DEWALT built brushless motor and XR Li-ion batteries deliver more run time and capacity over standard units
- 3-speed settings for optimized application versatility
- Precision drive in speed 1 for precision applications and added control
- 3 LED lights with 20 second delay after trigger release, provide visibility without shadows
- 1-handed loading 1/4-in hex chuck with easy grip sleeve, accepts 1-in bit tips
- Compact and lightweight design to fit into tight areas (6 mm shorter than the previous DCF886)
- Includes 1 DCF887 20-volt MAX XR 1/4-in 3-speed impact driver, two 4.0-Ah 20-volt MAX XR batteries, 1 fast charger, 1 belt hook
-
Free Shipping
$379.00
Features
- Centered handle position provides superior balance and ergonomics and allows for more accurate cuts and less user fatigue
- LED work light with 20 second delay illuminates dark work surfaces for accurate cutting
- Integrated hang hook allows user to hang the saw without damaging the front handle or base
- Blade tracking adjustment increases blade life by providing better blade tracking
- Tool-free blade changing lever loosens blade tension to allow for blade change
- Dual-bearing blade guide rollers provides increased durability in the blade support system
- Ergonomic soft grip back handle provides comfort and flexibility
-
Free Shipping
$559.00
Features
- OSHA Table 1 Compliant when paired with DWH303DH On Board Extractor
- Brushless motor and durable German-engineered mechanism for efficient performance and runtime.
- Rotating Dial to set tool to a specific application mode – Drill, Hammer Drill, or Chip.
- SHOCKS™- Active Vibration Control significantly reduces vibration and increases user comfort and productivity, A Perform and Protect Feature
- 2.1 Joules impact energy provides corded power without the cord
-
Free Shipping
$249.00
Features
- UP TO 50% MORE POWER WITH FLEXVOLT® BATTERIES
- FAST CUTTING: 1-1/8 in. stroke length delivers a fast cutting speed
- EASY BLADE CHANGES: Keyless lever-action blade clamp for quick and easy blade changes
- BLADE CONTROL: Variable-speed trigger with 0-3,000 spm provides blade control
- INCREASED VISIBILITY: Bright LED for better visibility in low-light work areas
- Tool Connect™ Chip Ready: Chip pocket accepts Tool Connect™ Chip DCE042 and connects with Tool Connect™ Site Manager app for easy asset management on the jobsite. (DCE042 sold separately)
- COMPATIBLE with all DEWALT® 20V MAX* and FLEXVOLT® Batteries
-
Free Shipping
$53.99
Features
- Bull Point (Moil Point) used for chipping and breaking applications in a variety of masonry products
- Slotting chisel is used for removing grout from brick and for controlled breaking applications
- Scaling chisel (wide chisel) is used for removing tile, concrete splatter, and other excess material
- Manufactured by DEWALT
-
Standard Shipping
$294.69
Features
- Premium XR lithium ion pack provides up to 60% more capacity than standard 20V MAX battery pack (DCB200)
- 3-LED fuel gauge allows immediate feedback on state of charge
- No memory and virtually no self-discharge for maximum productivity and less downtime
- Lightweight at 1.4-lbs and compatible with entire line of 20V MAX tools
- Maximum initial battery voltage (measured without a workload) is 20 volts – nominal voltage is 18
-
Standard Shipping
$17.99
Features
- Cold chisel (narrow chisel) is used for channeling or breaking in a straight line
- For use with all brands of SDS max demolition hammers and rotary hammers with chipping function
- Fully hardened steel body delivers increased life and durability
-
Standard Shipping
$49.99
Features
- High diamond concentration for long life and aggressive material removal
- Large grinding segments with heat treated steel bodies which provides increases durability and wheel life
- Dry grinding of concrete and other masonry materials
- Smoothing of uneven surfaces
-
Standard Shipping
$10.99
Features
- Segmented rim blades are laser-welded with heat-treated steel bodies
- These blades ideal for tough masonry applications
- Can be used wet or dry
-
Standard Shipping
$2.09
Features
- More Cuts. Fewer Wheels.TM
- 50% Longer Life, Replace less often with Temper Point grains that are tougher and razor sharp. Better adhesion between the coated grains and resin creates a longer lasting cutting edge that wears
- Extremely Versatile: Efficiently cut a wide range of metals including carbon steel, stainless and nickel-based alloys.
- Aggressive Cutting Action: Make fast cuts with a thin wheel design and high-grain concentration.
- Durable By DesignTM: Built with two sheets of fiberglass for wheel strength. Designed to reduce wheel breakage.
-
Standard Shipping
$12.59
Features
- LONG-LASTING PERFORMANCE with up to 2X the life of Diablo
- BUILT FOR LONG LIFE with mulit-tooth design for aggressive cuts
- DESIGNED for DURABILITY from Proprietary welded carbide tips
- SMOOTH, EFFORTLESS CUTTING with large heat vents for cool cuts
- Large Heat Vents For Cool Cuts and Effortless Smooth Cuts
-
Standard Shipping
$9.99
Features
- Reinforced soulder for impact resistance in nail-embedded wood
- anti-stick coating reduces friction and gumming
- Thin kerf design for smooth cuts
- High-density tungsten carbide for toughness, wear-resistance, and long life
- Patented body slots reduce vibration for exceptional feel
- Exclusive, patent-pending ToughTrack tooth design for accurate tracking over the life of the blade
-
Standard Shipping
$14.99
Features
- Lifetime warranty
- Chrome vanadium steel
- Impact universal joint
-
Standard Shipping
$289.99
Features
- Low profile design with enhanced ergonomics and balance for comfort and control
- Powerful enough to drive into engineered lumber
- Industrial grade design for high volume framing and sheathing applications
- Tool free features: depth of drive adjustment, selectable trigger for single drive or multi drive actuation modes, adjustable rafter hook
- High capacity coil magazine
- Recoil dampening engine system for smoother feel, less fatigue and higher productivity
-
Free Shipping
$317.64
Features
- Powerful motor delivers 10,000 max PSI to power through clogged grease fittings
- High-volume pump pushes up to 5.0 oz per min high-flow applications
- Up to 16 cartridges per charge with a single DEWALT 20V MAX battery (4.0 Ah)
- Variable speed trigger offers precise control of the grease flow
- 42-in extra long and flexible hose designed for reaching hard to access grease fittings
- Bright LED light assists in locating hard to see grease fittings in low-light situations
- Innovative pump filter screen prevents dirt and contamination from clogging the pump mechanism
- Air-bleeder valve assists in pump priming after cartridge changes
-
Special Order Shipping
Features
- Track and manage your battery using Tool Connect App
- Full range of app features include last seen, enable/disable, alerts and diagnostics
- Secure system – once battery is paired to a phone, no other phone in range can pair to it
- Blue LED feedback for pairing and identification
- Download the Tool Connect App for free at the app store or Google play for more information
- Bluetooth Compatible
-
Free Shipping
$199.69
Features
- JOB-SPECIFIC ADJUSTABILITY: Change length from 51 in. to 74 in. as you extend and rotate padded hooks 360° to fit most SUV/truck hoods
- PROTECTS SUV/TRUCK SURFACE: Anti-marring hooks designed to keep from scratching your vehicle’s paint
- VERSATILE COMPATIBILITY: Works with all 12V MAX/20V MAX/60V MAX batteries (excluding DCB615)
- FULL CONTROL of light with high, low, and single-arm modes
- EASY TRANSPORT and storage with foldable design
-
Free Shipping
$179.00
Features
- Product Length: 5 in
- Battery Capacity: 5 Ah
- Charge Time: 1.5 hour(s)
- Fuel Gauge: Yes
- Battery Type: Lithium-Ion
- Voltage: 20V MAX* XR® V
- Battery Rechargeable: Yes
-
Free Shipping
$299.00
Features
- Natural white LED provides accurate color visibility, long life span, and stays cool to the touch
- 3 Brightness settings to customize work space illumination
- Telescoping pole extends light head to 7-ft to reduce shadows and glare
- Latch mechanism on handle to easily extend and collapse legs
- Tough shroud protects light head and withstands jobsite conditions
