Showing 321–360 of 403 results
-
Standard Shipping
$24.99
Features
- Allows easy installation of 4×4 wood posts on existing concrete
- Black powder-coated steel construction for reliable strength and decorative finish
- Approved for installation with the Strong-Drive® SDS Connector screw
-
Standard Shipping
$15.99
Features
- Allows easy repair of rotted or damaged wood posts installed in concrete or dirt
- Black powder-coated steel construction for reliable strength and decorative finish
- Approved for installation with the Strong-Drive® SD Connector screw
- Reinforces weakened wood posts without having to replace the post or the concrete
-
Standard Shipping
$40.37
Features
- Excellent for use in cold weather conditions or applications where fast cure is required.
- superior sustained load performance at elevated temperature.
- can be specified for dry and damp conditions when in-service temperatures range from -40°F (-40°C) to 180°F (82°C).
- Approved for installation with vacuum-drill bit system without further hole cleaning.
- Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to reduced and elevated temperatures and long-term sustained loads.
- Easy hole-cleaning procedure — no power-brushing required.
-
Standard Shipping
$121.41
Features
- superior bond strengths permit ductile solutions in high seismic areas.
- improved sustained load performance at elevated temperature.
- can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C).
- Recognized per ICC ES AC308
- Approved for installation with multiple vacuum-drill bit systems without further hole cleaning.
- Wire brush hole-cleaning system for conventional blow-brush-blow cleaning method for anchoring.
- With higher bond strengths, ductile solutions can often be achieved with SET-3G in high seismic areas.
- Low-odor formulation.
- no performance difference between water-saturated concrete, water-filled holes, or submerged concrete.
- For use with potable water.
-
Standard Shipping
$111.29
Features
- permitted for sustained load performance at elevated temperature.
- for dry and damp conditions when in-service temperatures range from -40°F (-40°C) to 150°F (65°C).
- Recognized per AC308 to be used for rebar development and splice length design provisions of ACI 318.
- Approved for installation with vacuum-drill bit system without further hole cleaning. See Code Report (ESR-2508) for approved system.
- Easy hole-cleaning — no power-brushing required.
- Manufactured in the USA using global materials.
-
Standard Shipping
$52.79
Features:
- Exceptional performance superior bond-strength values at long-term elevated temperature of 110 degreeF (43 degreeC) using optimized drill bit diameters
- Tested and assessed in accordance with ICC-ES AC308 and ACI 355.4 for use in cracked and uncracked normal-weight and lightweight concrete
- Design flexibility can be specified for dry or water-saturated conditions when temperatures range from -40 degreeF (-40 degreeC) to 176 degreeF (80 degreeC)
- Jobsite versatility can be installed in dry, water-saturated or water-filled holes in base materials with temperatures between 40 degreeF (4 degreeC) and 100 degreeF (38 degreeC)
- Maximized production and safety qualified for installation using the Speed Clean? DXS dust extraction drilling system as an alternative to the conventional blow-brush-blow hole-cleaning method
-
Standard Shipping
$132.72
Features:
- Redesigned tip and thread pattern provides easy starts and up to 25% less torque while driving makes for up to 20% faster driving
- Less installation torque also means less wear on tools
- Deep 6-lobed recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs
- The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks
- WSV screws can be easily backed out, allowing for future access to floor cavities
-
Standard Shipping
$13.95
Features:
- Provides a positive connection for a post to a wood deck
- Stronger than angled nailing or screw fastening
- Reduces the chance of the post splitting and eliminates nailing into end grain
- Not recommended for non top-supported installations (such as fences or unbraced carports)
- Nominal post size: 4×6
-
Standard Shipping
$4.20
Features:
- A versatile, heavy-duty strap for a variety of connections and splices where extra strength is needed
- Straight lines and chamfered edges offer a better appearance
- Provides support in home repair and construction projects
- Easy nailing pattern for connecting the sides of 2x members
- Width: 1-3/8 in.
-
Standard Shipping
$75.99
Features:
- Manual dispensing tool
- Features a steel carriage and is engineered for high-volume, continuous use
- The tool can be easily convert from dispensing a 22 oz. 1:1 ratio cartridge to a 16.5 oz. 2:1 ratio cartridge
- For 22 oz. adhesive cartridges
-
Standard Shipping
$13.41
Features:
- SUL = skewed left
- Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist
- These hangers cannot be modified but will accommodate a 40 degree to 50 degree skewed joist
- Available with the acute flange turned in to accommodate end-of-wall installation for solid sawn sizes only (SURC or SULC)
- Nominal joist size: 2×6 or 2×8
-
Free Shipping
$308.77
Features:
- Flat head
- Unique box thread design with raised-ridge technology greatly reduces driving torque
- Specially designed sharp point penetrates hard wood products with ease
- 6-lobe drive helps prevent driver-bit cam-out while driving easier and extending bit life (replacement bit BITTX25)
- Length: 3 in.
-
Standard Shipping
$2.39
Features:
- Anchors mudsill to concrete block, poured walls or slab foundations
- Fill CMU cell with concrete grout first, then place MASB into the grouted cell and adjust into position
- Attach mudsill to anchor only after the concrete grout cures
- Nominal sill size: 2×4, 2×6
- Made from 16-gauge steel
-
Standard Shipping
$32.01
Features:
- Ideal for retrofit or new construction projects
- Can be installed with cast-in-place or post-installed anchor bolts
- Four-ply formed steel provides increased tension capacity
- Anchor bolt washers not required
- 2-1/2 in. width x 16 in. length
-
Standard Shipping
$1.89
Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- Speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: 2×8 and 2×10
-
Standard Shipping
$17.17
Features:
- The minimum effective shank length must equal or exceed the sum of the thickness of the attached material and the minimum embedment depth
- Code listed per ICC-ES ESR-2138, Florida FL15730 and LA RR25469
- Compatible with Simpson Strong-Tie powder-actuated tool systems as well as other common tools
- .300-in. head diameter / .157-in. shank diameter
- 1-in. washer
-
Standard Shipping
$3.03
Features:
- LUC-series hangers are tested, load rated and code compliant
- The LUC series installs using several fastener selections with tested allowable loads
- Suitable for nominal 2×10 and 2×12 lumber
- Made from 18-gauge steel
- ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
-
Free Shipping
$189.99
Features:
- Redesigned tip and thread pattern provides easy starts and up to 25% less torque while driving makes for up to 20% faster driving
- Less installation torque also means less wear on tools
- Deep 6-lobed recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs
- The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks
- WSV screws can be easily backed out, allowing for future access to floor cavities
-
Standard Shipping
$4.09
Features:
- One-piece, wrap-around clip ensures uniform holding capacity
- Threaded end is chamfered for ease of starting nut
- Diameter: 5/8 in.
- Length: 6 in.
- Made from mechanically galvanized carbon steel
-
Standard Shipping
$1.35
Features:
- Load-rated, precut strap designed for quick installation and optimal performance
- Designed to resist wind and seismic forces
- Floor-to-floor clear span application
- Width: 1-1/4 in.
- Length: 18 in.
-
Standard Shipping
$77.26
Features:
- SDS screws are supplied with the holdowns to ensure proper fasteners are used
- No stud bolts to countersink at openings
- Height: 14 in.
- Made from 7-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
Standard Shipping
$1.99
Features:
- Holds the rafter or truss on both sides for high lateral load resistance
- Used for a variety of connections where one member crosses another
- Can be installed on inside or outside of wall, or both sides
- Can be installed with flanges facing either inward or outward
- Made from 18-gauge steel
-
Standard Shipping
$2.29
Features:
- An indented embedment line ensures accurate embedment depth
- Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
- Load rated for wind and seismic forces
- 12-in. exposed length
- Embed 4 in. into a poured concrete bond beam or grouted block wall
-
Standard Shipping
$13.49
Features:
- Suitable for retrofit applications
- The embossments add stiffness in crucial areas for improved performance
- Simple to install and can be installed on the inside or outside of the wall
- Load rated to resist high-wind forces
- 2-ply
-
Standard Shipping
$53.96
Features:
- Attaches a post to existing concrete for decks, patio covers and other top-supported structures
- Features 1-in. standoff to help prevent rot at post end
- Slotted for adjustability
- Designed for versatility, cost-effectiveness and maximum uplift performance
- Nominal post size: 6×6
-
Standard Shipping
$2.41
Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- Speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: 2×10, 2×12, 2×14
-
Standard Shipping
$5.29
Features:
- One-piece, wrap-around clip ensures uniform holding capacity
- Threaded end is chamfered for ease of starting nut
- Diameter: 5/8 in.
- Length: 10 in.
- Made from zinc-plated carbon steel
-
Standard Shipping
$4.42
Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- Speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: Double 2×10 and Double 2×12
-
Standard Shipping
$30.43
Features:
- Provides a positive connection for a post to a wood deck
- Stronger than angled nailing or screw fastening
- Reduces the chance of the post splitting and eliminates nailing into end grain
- Not recommended for non top-supported installations (such as fences or unbraced carports)
- Nominal post size: 6x
-
Standard Shipping
$8.12
Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- Speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: Triple 2×8 and Triple 2×10
-
Standard Shipping
$3.37
Features:
- One-piece, wrap-around clip ensures uniform holding capacity
- Threaded end is chamfered for ease of starting nut
- Diameter: 3/4 in.
- Length: 6-1/4 in.
- Made from zinc-plated carbon steel
-
Standard Shipping
$35.93
Features:
- SDS-plus shank power setting tool for DIAB anchors
- For use with Simpson Strong-Tie Drop-In models DIAB50, DIABL50, and DIAB50C
- Sets drop-ins for overhead applications
- Drop-in anchors are sold separately
- Made from carbon steel
-
Standard Shipping
$0.74
Features:
- A versatile and easy-to-use mending plate for wood-to-wood connections
- These non-structural connectors are ideal for general fix-up work
- Installs without nails; align wood with arrows at joint and hammer plate to embed prongs
- Used for non-structural applications only (not for truss applications)
- Width: 2 in.
-
Standard Shipping
$0.96
Features:
- Bolt diameter: 3/8 in.
- Dimensions: 2 in. x 2 in.
- Made from 3/16 in. steel
- Uncoated steel construction
-
Standard Shipping
$2.24
Features:
- Qualified for static and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
- Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
- Hex-washer head requires no separate washer and provides a clean installed appearance
-
Standard Shipping
$53.96
Features:
- Extra optional triangle holes for additional load
- HUC-series hangers are tested, load rated and code compliant
- Install wood joists to wood, masonry and concrete
- Seat width: 4-11/16 in.
- Nominal joist size: Triple 2×10
-
Standard Shipping
$46.82
Features:
- Attaches a post to existing concrete for decks, patio covers and other top-supported structures
- Features 1-in. standoff to help prevent rot at post end
- Slotted for adjustability
- Designed for versatility, cost-effectiveness and maximum uplift performance
- Nominal post size: 4×6
-
Standard Shipping
$26.71
Features:
- The nailing pattern allows for nailing to the edges of double 2x’s
- Strap nail slots are countersunk to provide a lower nail head profile
- The slots below the embedment line enable increased front-to-back concrete bond and help to reduce spalling
- Standard strap length: 26-1/8 in.
- Made from 12-gauge steel
-
Free Shipping
$210.59
Features:
- Sized to fit nominal 2x lumber
- Packaged in lightweight cartons
- Length: 150 ft.
- Made from 16-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
Standard Shipping
$5.31
Features:
- Qualified for static and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
- Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
- Hex-washer head requires no separate washer and provides a clean installed appearance
