construction tool built to support professional and DIY tasks with dependable power. Ideal for a wide range of uses requiring strength and consistency
Showing 1–40 of 246 resultsSorted by popularity
-
RB441T TwinTier MAX Rebar Tying Tool
Features:
- Double Tying Speed increases productivity
- Cost Saving – Mechanism dispenses precise amount of wire
- Shorter Tie Height
- Large Jaw – up to #7 x #7 rebar
- Long Battery Life up to 4,000 ties
- Easy Push Gear Release
- Fast Load Wire
-
-
15553 Marshalltown Control Joint Groover, 36in
$69.61Features
- 15553 has a 1/4″ radius
- Groove depth: 1-1/2″
- Use with a Part #9 or #10 clevis handle, sold separately
CONTROL JOINT GROOVER, 36in
Minimum order quantity: 2Order in multiples of: 2 -
Dewalt DCH775X2 60V MAX 2 in. Brushless Cordless SDS MAX Combination Rotary Hammer Kit
$1,299.00Features
- Dewalt DCH775X2 offers rapid drilling and chipping in hard concrete with 19.4 J of impact energy
- Maintain speed under heavy loads with constant speed electronics
- Efficient performance and runtime with brushless motor and German-engineered apparatus
- Pro-grade versatility: Tackle horizontal and downward drilling for #9 – #14 rebar dowel applications, dry coring up to 6 in., chipping in any lower wall and floor, bushing, and ground rod driving
- Reduced vibration for comfortable grip Active Vibration Control
-
14% OFF
XWT15Z 18V LXT Brushless Cordless 4‑Speed 1/2in Sq. Drive Impact Wrench w/ Detent Anvil Tool Only
Features
- Makita XWT15Z features 240 ft.lbs. of Fastening Torque and 430 ft.lbs. of Nut-Busting Torque
- 3 forward and 3 reverse Auto-Stop modes
- 4-speed power selection
- Weighs only 4.0 lbs. with battery
- Tool Only
-
-
CB72DE Marshalltown Double Edge Channel Bull Float
$274.97Features
- Length: 6 ft
- Width: 6 in wide
- CB72DE has a sharp and rounded edge to allow cutting and floating with one tool
- Blade material: Magnesium
CHANNEL BULL FLOAT
-
RED700516 Marshalltown Aluminum Backed Concrete Broom, 48in
$145.29Features
- Create a quality finish on concrete after floating
- Extra soft polypropylene fibers
- Size: 48in
BROOM KIT,CEMFIN,ALU,48inin.006W
-
DEWALT DWF83PT 30 Degree Paper Tape Collated Framing Nailer, Pneumatic, Bump/Sequential
$235.99Features:
- Industrial-grade design for high-speed, high-volume framing
- Lightweight with ergonomic balance for comfort and control
- Recoil-dampening engine system helps minimize recoil
- Supports 30° paper tape clipped and full round head nails
- Selectable bump and sequential firing modes
-
HG6530VK Variable Temperature Heat Gun Kit with LCD Digital Display
$178.99Features
- Push-button temperature control (122 – 1,202°F) for precise control over a wide variety of applications with LCD temperature reading
- Slide switch sets three air flow settings (cooling, low, high) for greater versatility
- Push-button temperature control increases by 50°F increments for exact temperature adjustment
- Compact 2.0 lb. design features a rubberized pistol grip handle and an integrated rear stand
- Ideal for vehicle wraps and tinting, stripping lacquer, paint and varnish, thawing frozen pipes, loosening tile and putty, re-melting adhesive, removing stickers, waxing and de-waxing, bending plastic pipes and sheets, and more
-
GA9060RX3 7″ Concrete Surface Planer with Dust Extraction Shroud
$347.99Features
- Dust extraction shroud is designed to capture dust during concrete surfacing applications
- Powerful 15.0 AMP motor delivers 6,600 RPM for optimum durability and performance
- Anti-restart protection is designed to prevent motor start up in the on-power switch position after a power disruption
- Power light indicates switch failure, cord damage or worn-out motor brushes
- Loop handle can be held at multiple positions for increased comfort in various orientations
- Rear handle trigger switch with lock-off feature requires two actions to power on
-
-
-
7% OFF
XEC01Z 36V (18V X2) LXT Brushless 9″ Power Cutter with AFT and Electric Brake, Tool Only
Original price was: $741.99.$692.99Current price is: $692.99.Features:
- 18V 5Ah Battery (not included) Fully Charged in 45 Minutes
- Large spindle lock button for easier wheel changes while wearing gloves.
- Only 13.9lbs, lower noise at 114db(A), and Zero Emissions
- Low maintenance, no gas/oil mixes, no pull starts
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol
-
VB3616DAM Metabo HPT 36V Multivolt Portable Rebar Bender/Cutter
Features:
- Industry’s first cordless rebar bender/cutter
- Cuts up to #5 rebar in 2.6 seconds
- New reverse-rotation mode for improved operating efficiency
-
XRH10PTW 36V (18V X2) LXT Brushless 1‑1/8″ SDS‑PLUS AVT Rotary Hammer Kit, w/ HEPA Dust Extractor, AFT, AWS Capable (5.0Ah)
$828.76Features:
- AWS™ Capable – Remote Autostart Bluetooth Capable with 198901-5 transmitter sold separately
- OSHA Table 1 compliant on-board dust extractor
- Constant Speed Control
- Anti-Vibration Technology
- OSHA Table 1 compliant on-board dust extractor
-
HM1214C 27 lb. SDS‑MAX AVT Demolition Hammer, and 1″ Rotary Hammer
$1,385.99Features:
- Powerful 14 Amp Motor
- AVT Counterbalance System for Reduced Vibration
- Automatic brush cutout system for longer tool life
- Variable speed adjustable dial control
-
DeWalt DCS379P1 20V Max XR Dual Trigger Mid-Size Bandsaw Kit [5.0 Ah]
$630.99Features
- Secondary Foregrip Trigger
- Larger Cut Capacity for More Variety in Applicable Materials
- Powerful Brushless Motor
- Integrated Blade Guard
- Variable Speed Trigger and Dial
-
Dewalt DCD130T1 60V Max Mixer/Drill Kit With E-Clutch System
Features
- Mix up to 19 premixed drywall buckets (5 gal.) on a single charge using the DCB606 DEWALT FLEXVOLT® battery (6Ah)**
- Mix up to 17 buckets of tile mortar (5 gal.) on a single charge using THE DCB606 FLEXVOLT battery (6.0Ah)**
- Mix up to 9 buckets of concrete (4.5 gal.) on a single charge using THE DCB606 FLEXVOLT battery (6.0Ah)**
- 3-Position side handle allows for optimum position while mixing
- Integrated E-Clutch System helps to improve user control
-
19 11DC Marshalltown 11in Brick Trowel Philadelphia Pattern – DuraCork Handle
$62.81Features
- 19 11DC Length: 11 in
- Width: 5 1/4 in
- Handle: DuraCork
- Blade: High Carbon Steel
DF12 Marshalltown 12 Qt Heavyweight Rubber Pail Standard Lip
11in BRICK TROWEL PHILADELPHIA PATTERN – DURACORK HANDLE -
-
-
![makita-hr2661-rotary-hammer-2 - HR2661 1" SDS‑PLUS AVT Rotary Hammer, w/ HEPA Dust Extractor [D‑handle]](https://www.heydensupply.com/wp-content/uploads/2021/09/makita-hr2661-rotary-hammer-2-600x600.png "makita-hr2661-rotary-hammer-2")
HR2661 1″ SDS‑PLUS AVT Rotary Hammer, w/ HEPA Dust Extractor [D‑handle]
Features
- On-board OSHA Compliant HEPA dust extractor
- System captures 99.97% of particulates .3 microns and larger
- AVT is an internal counterbalance system that actively works to reduce vibration
- Depth stop adjustment allows drilling up to 7-1/2″ deep
- Includes Dust extractor, Side Handle, Depth Gauge and Tool Case
-
B365MT Marshalltown Multi-Track Bull Float
$163.59Features
- Magnesium blade
- Brackets and handles sold separately
MULTI-TRACK BULL FLOAT
-
MAX USA RB398S TwinTier Rebar Tying Tool
Features:
- 5 times faster than manual tying
- Lightweight and compact body for easy maneuvering and one handed operation
- Li-ion battery can complete 2600 ties per charge
- Ties approximately 120 times per coil.
- Brushless twisting motor
-
XSS02Z 18V LXT Cordless 6 1/2in Circular Saw, Tool Only
$155.99Features:
- 3,700rpm motor for fast cutting and ripping
- Precision machined aluminum base
- Excellent cutting capacity
- Ergonomic design
- 3 Year Limited Warranty
-
RB518 Max Rebar Tying Tool up to #7 x #8 with 21ga wire
The RB518 is a battery operated rebar tying tool that can tie #5 x #5 to #7 x #8 rebar. You will save time, save money and increase productivity with this handy cordless tool. MAX Re-Bar-Tiers are also proven to reduce the risk of developing musculoskeletal diseases.
-
Diablo DMAMXCH1000 3 in. x 12 in. SDS-Max Scaling Chisel
$24.99Features:
- Extreme durability and longer life in concrete
- Ideal for general demolition work, thin-set removal, cleaning concrete, and removing scale and rust
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Wide chisel design for minimal effort and time in concrete removal applications
- Maximum performance in cordless and corded SDS-Max rotary hammers
-
XRH07PTUN 36V (18V X2) LXT Brushless 1‑9/16″ SDS‑MAX Advanced AVT Rotary Hammer Kit, AFT, AWS [5.0Ah]
Features
- 36V Dual power rotary hammer from 2 18V LXT batteries
- Anti-Vibration Technology for smoother operation
- Dust extraction capability with optional Makita Dust Attachment Kit
- Auto-start Wireless System for bluetooth remote start dust extraction
-
New Product16% OFF
RB441T TwinTier MAX Rebar Tying Tool TG OPEN BOX CLEARANCE
Original price was: $2,784.93.$2,334.94Current price is: $2,334.94.Features:
- Double Tying Speed increases productivity
- Cost Saving – Mechanism dispenses precise amount of wire
- Shorter Tie Height
- Large Jaw – up to #7 x #7 rebar
- Long Battery Life up to 4,000 ties
- Easy Push Gear Release
- Fast Load Wire
-
Werner TW6203 3ft Type IA Fiberglass Work Stand, 28 in Wide Serrated Steps, 300 lb/Side
Features:
- Type IA duty rating?300 lb per side for one- or two-person use
- 28 in x 8 in serrated steps for slip-resistant standing
- Pinch-free spreaders and braced bottom steps
- Non-conductive fiberglass rails for working near electricity
- 3 ft portable work stand for jobsites and maintenance
-
Werner T7420 20ft Type IA Fiberglass Twin Step Ladder, Orange
Features:
- Type IA duty rating 300 lb per side for two-person use
- Non-conductive fiberglass rails for work near electricity
- Heavy-gauge aluminum top with reinforced connectors
- EDGE bracing and external rail shields for durability
- Slip-resistant Traction-Tred steps, double riveted and knee-braced
-
Werner T7416 16ft Type IA Fiberglass Twin Step Ladder, 300 lb Per Side
Features:
- Type IA duty rating ? 300 lb per side for two-person use
- Fiberglass rails, non-conductive for work near electricity
- Heavy-gauge aluminum top with reinforced connectors
- EDGE bracing system and external rail shields for durability
- Slip-resistant Traction-Tred steps, double-riveted and knee-braced
- GLAS*MARK Violator stripes for high visibility
-
Werner T7412 12ft Type IAA Fiberglass Twin Stepladder, 375 lb per side
Features:
- Type IAA duty rating ? 375 lb per side for two-person use
- Fiberglass rails with GLAS*MARK Violator stripes for visibility
- Heavy-gauge aluminum top with reinforced connectors
- Slip-resistant Traction-Tred steps, double-riveted and knee-braced
- EDGE bracing and external rail shields for durability
- Non-conductive rails for working near electricity
-
Werner T7406 6ft Type IAA Fiberglass Twin Step Ladder, 375 lb Duty Rating
Features:
- Type IAA twin stepladder rated 375 lb per side
- Fiberglass rails are non-conductive for working near electricity
- Heavy-gauge aluminum top with tool holes
- EDGE bracing system with external rail shields for durability
- Slip-resistant Traction-Tred steps, double-riveted and knee-braced
-
Werner T6312 12ft Type IA Fiberglass Twin Step Ladder, Orange, 300 lb per side
Features:
- 12 ft twin stepladder with Type IA duty rating (300 lb per side)
- Dual HolsterTop with paint and tool holders
- Heavy-duty internal spreaders
- Slip-resistant Traction-Tred steps, double riveted and knee braced
- EDGE molded brace and foot pad for durability
- Non-conductive fiberglass rails for work near electricity
-
Werner T6310 10 ft Type IA Fiberglass Twin Step Ladder, 300 lb per side, Orange
Features:
- Type IA duty rating supports 300 lb per side for one- or two-person use
- High-performance dual HolsterTop paint and tool holder
- Double riveted, slip-resistant Traction-Tred steps with knee braces
- Heavy-duty internal spreaders and EDGE molded brace with foot pads
- Non-conductive fiberglass rails for work near electricity
-
Werner T6306 6ft Type IA Fiberglass Twin Step Ladder, 300 lb Per Side
Features:
- Type IA twin stepladder supports 300 lb per side for one- or two-person use
- High-performance dual HolsterTop with paint and tool holders
- Slip-resistant Traction-Tred steps; all steps double-riveted and knee-braced
- Heavy-duty internal spreaders and EDGE molded brace with slip-resistant foot pads
- Non-conductive fiberglass rails for work near electricity
-
Werner T6212 12ft Type IA Fiberglass Twin Stepladder, 300 lb per side
Features:
- Type IA twin stepladder supports 300 lb per side
- High-performance dual HolsterTop with paint/tool holder
- Double-riveted, slip-resistant Traction-Tred steps with knee braces
- Heavy-duty internal spreaders and EDGE molded bracing with slip-resistant foot pads
- Non-conductive fiberglass rails for work near electricity
-
Werner T6208 8ft Type IA Fiberglass Twin Step Ladder, 300 lb per side
Features:
- Type IA duty rating supports 300 lb per side for two-person jobs
- Dual HolsterTop with paint and tool holders
- Slip-resistant Traction-Tred steps, double riveted and knee braced
- Heavy-duty internal spreaders for durability
- EDGE molded brace and foot pad for added strength and protection
- Non-conductive fiberglass rails for work near electricity
