Showing 601–640 of 796 results
-
Special Order Shipping
$2.99
Features:
- Sharp silicon carbide grain for penetration of very hard, non-metallic materials
- 1/4 inch thick depressed center wheel designed to be used at a 30 degree angle on a right angle grinder for offhand stock removal, smoothing welds ,and beveling on the bottom/face of the wheel
- Our ideal blend of wheel strength and smooth bond provide a good mix of cut rate and life
- Low initial price point is ideal for end user unable to measure performance
Minimum order quantity: 10
Order in multiples of: 10
-
Special Order Shipping
$2.99
Features:
- Quality aluminum oxide for cutting all metals especially 300 and 400 series stainless, and hard and soft carbon steels
- Constructed with full fiberglass reinforcing for strength and stable cutting action
- DM (Diamond Mount) pop-out and 5/8 inch center hole combination to fit all popular circular saws
- A good mix of value and consistent performance for general purpose circular saw applications when initial price is a primary purchasing consideration
Minimum order quantity: 25
Order in multiples of: 25
-
Special Order Shipping
$1.99
Features:
- Premium aluminum oxide grain and high-performance bond deliver fast cut and excellent wheel life
- Ultra-thin reinforced straight wheel for cutting-off only applications on right angle grinder for maximum cut rate with minimum kerf loss; ideal when precise, thin cut is desired
- Full fiberglass reinforcement for straight, stable cuts
- Ideal for cutting 400 series stainless, and hard and soft carbon steels
Minimum order quantity: 25
Order in multiples of: 25
-
Special Order Shipping
$14.99
Features:
- Sharp silicon carbide abrasive provides fast aggressive cutting action
- Open web construction for minimal loading; great alternative to wire brushes
- Advanced resin bond prevents shedding, snagging, gouging, and rework
- Extra coarse grit for removing parting lines and rust, and stripping coatings on aluminum, cast iron, concrete, fiberglass, composites, carbon steels, masonry, and natural stone
Minimum order quantity: 10
Order in multiples of: 10
-
Special Order Shipping
$4.99
Features:
- A blend of the most advanced zirconia alumina and premium aluminum oxide abrasives delivers 2 to 3 times the life of aluminum oxide wheels
- 1/4 inch thick depressed center wheel designed to be used at a 30 degree angle on a right angle grinder for light- to heavy-duty grinding on the bottom/face of the wheel
- Broad utility; from light-to heavy-pressure applications
- Excellent blend of performance and price on a wide range of materials, including 400 series stainless, hard carbon steels, and soft carbon steels
Minimum order quantity: 25
Order in multiples of: 25
-
Special Order Shipping
$5.99
Features:
- New advanced aluminum oxide grain blend with more cutting points per unit area increasing cutting speed by 50 percent
- Up to twice the life and aggressive feel with a new active tough bond technology
- Versatile choice for cutting rebar, structural steel, pipe and sheet metal including hard and soft carbon steel and 400 series stainless
- First to market universal arbor allows a single blade to be run on saws with a 1 in. or 20mm arbor
Minimum order quantity: 10
Order in multiples of: 10
-
Special Order Shipping
$5.99
Features:
- Sharp, coarse grit silicon carbide abrasive provides a economical cost solution for cutting brick, block, concrete on high-speed saws
- Available in two specifications: one for higher horsepower machines where additional durability is needed, and one for lower horsepower machines with a free cutting action
- The new patent pending Universal Arbor will allow a single blade to be run on saws with either 1 in or 20mm arbors
- Good choice for customers who are looking for alternative to a diamond blade
Minimum order quantity: 10
Order in multiples of: 10
-
Special Order Shipping
$2.99
Features:
- Sharp coarse silicon carbide abrasive blend for fast cutting and long life on l masonry materials such as concrete, brick and asphalt circular saw applications
- Constructed with full fiberglass reinforcing for strength and stable cutting action
- DM (Diamond Mount) pop-out and 5/8 inch center hole combination to fit all popular circular saws
- A good mix of value and consistent performance for general purpose circular saw applications when initial price is a primary purchasing consideration
Minimum order quantity: 25
Order in multiples of: 25
-
Special Order Shipping
$424.99
Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
-
Special Order Shipping
$341.99
Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
-
Special Order Shipping
$249.99
Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
-
Special Order Shipping
$247.99
Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
-
Special Order Shipping
$225.99
Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
-
Special Order Shipping
$187.99
Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
-
Free Shipping
$707.50
Features
- 1,510 ft.lbs. of Nut-Busting Torque and 1,330 ft.lbs. of Fastening Torque
- 3 forward and 3 reverse Auto-Stop modes
- 4-speed power selection switch
- Compact length at only 8-1/2in
- Ultra-smooth variable speed trigger
-
Free Shipping
$611.25
Features
- Makita GWT08D 4-speed power selection switch
- Compact and ergonomic design?
- Ultra-smooth variable speed trigger
- Reinforced gear housing
- Delivers 810 ft.lbs. of Nut-Busting Torque and 560 ft.lbs. of Fastening Torque
-
Free Shipping
$562.50
Features
- Constant speed control applies additional power under load
- Active Feedback-Sensing Technology
- Anti-Vibration Technology
- Dust extraction capability
- Electric brake
-
Free Shipping
$1,698.75
Features
- Two 40V max XGT batteries combined
- Extreme Protection Technology
- Anti-Vibration Technology internal counterbalance system
- Electric brake
- Dust extraction capability
-
SALE 19% OFF
Free Shipping
$895.31 Original price was: $895.31.$727.44Current price is: $727.44.
Features
- 40V max XGT battery
- Up to 20% faster breaking efficiency than corded equivalent
- Constant speed control automatically applies additional power under load
- Dust extraction capability
- Soft start suppresses start-up reaction
-
Free Shipping
$1,223.75
Features
- Makita GMH02PM allows for two 40V max XGT batteries to be combined
- 15% faster breaking efficiency than corded equivalent
- Constant speed control automatically applies additional power under load
- Anti-Vibration Technology (AVT) counterbalance system
- Dust extraction capability
-
SALE 19% OFF
Free Shipping
$546.69 Original price was: $546.69.$444.19Current price is: $444.19.
Features
- Makita GSH01M1 features Makita-built brushless motor delivers 6,000 RPM
- Die-cast magnesium base, blade guard, and blade cover
- Large 2-5/8in cutting capacity at 90 deg
- AWS Capable for wireless power-on/off
- Electric brake
-
Free Shipping
$548.75
Features
- 5x5in cutting capacity
- Makita GBP01Z features a brushless motor, delivering faster cuts with variable speed 0-630 ft./min.
- Electric brake for maximum productivity
- Soft start feature for smooth start-ups
-
Free Shipping
$768.75
Features
- 5x5in cutting capacity
- Makita-built brushless motor delivers faster cutting with variable speed 0-630 ft./min.
- Electric brake for maximum productivity
- Soft start feature for smooth start-ups
-
Free Shipping
$468.75
Features
- Makita-built brushless motor
- Electric brake stops the grinding or cut-off wheel in 2 seconds or less
- Electronic current limiter helps protect the motor from overload in high torque application
- Variable speed control dial 3,000-8,500RPM
- Anti-restart protection
-
Free Shipping
$509.00
- Makita GAG10M1 features an automatic-start Wireless System (AWS)
- Brushless motor along with a single 40V max XGT battery
- Electronic current limiter protects the motor from overload
- Electric brake stops wheel in 4.5 seconds or less
- Paddle switch with no lock-on for operator convenience
- Reinforced metal gear housing for maximum durability
-
Free Shipping
$773.75
Features
- Brushless motor with two speed, variable speed
- 1/2″ keyed chuck
- Built in L.E.D. light
- Includes 40V Max XGT Lithium Ion 4.0AH battery
- Only 12.8Lbs
-
Free Shipping
$668.96
Features
- High strength cast aluminum housing
- Shock absorbing frame and carry handle
- Water tight strain relief power cords
- Interchangeable with all other brands
- Serviceable parts easily available
- Comfortable shoulder strap available
-
Free Shipping
$899.99
Features:
- Stratified Air Scavenging (SAS)
- Start capacitor for easy starting
- Sliding front engine mounts
- Cyclonic air Intake
- Includes – Universal wrench, Torx wrench, screwdriver, adapter ring (20mm to 1″)
Discontinued – No stock available
-
Free Shipping
$279.00
Features
- 20V Max
- Light Weight
- Brushless Cordless Tool
- 3 Mode LED
-
Free Shipping
$329.00
Features
- DCD777 1/2 in. Drill/Driver is only 7.52 in. front to back and has a compact design to fit into tight spaces.
- DCF787 1/4 in. Impact Driver is lightweight at only 2 lbs.
- DCS356 Oscillating Multi-Tool has a dual-grip variable-speed trigger that offers increased speed and application control.
- DCS356 Oscillating Multi-Tool has 3 birght LEDs to illuminate dark work surfaces.
-
Standard Shipping
$12.99
Features
- Every other tooth is ground thinner for fast cuts
- Thicker plate design for improved tracking
- Reinforced shoulder for durability and impact resistance
- Body slots dissipate heat for long blade life
Minimum order quantity: 10
Order in multiples of: 10
-
Free Shipping
$869.00
Features
- Start capacitor with start support function
- Water supply kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank
- 2-mass dampening system engineered to provide reduced vibration
- Aluminum guard and wheel pressure plates to reduce weight
-
Standard Shipping
$97.85
Features:
- FIRST-CUT Basic First-Cut Blades
-
Standard Shipping
$52.99
Features:
- FIRST-CUT Basic First-Cut Blades
-
Standard Shipping
$72.80
Features:
- Basic quality diamond and economical grinding value
-
Standard Shipping
$25.95
Features:
- Basic quality diamond and good cutting value
-
Standard Shipping
$10.86
Features:
- Basic quality diamond and good cutting value
-
Standard Shipping
$2,849.81
Features:
- Thermal overload protection
- Side handle for stability
- Water connection for wet coring or dry vacuum port
- Carrying case and spindle wrench
