Price

Category

Product Type

Brand

Showing all 16 results

  • WA62600MG Wedge-All 5/8 in. x 6 in. Mechanically Galvanized Expansion Anchor

    Standard Shipping

    $4.09

    Features:

    • One-piece, wrap-around clip ensures uniform holding capacity
    • Threaded end is chamfered for ease of starting nut
    • Diameter: 5/8 in.
    • Length: 6 in.
    • Made from mechanically galvanized carbon steel
    Simpson Strong-tie WA62600MG Product Page
    Add to cart
  • STB2-75812 Strong-Bolt 2 3/4 in. x 8-1/2 in. Wedge Anchor

    Standard Shipping

    $5.53

    Features:

    • Chamfered top designed to prevent mushrooming during installation
    • Qualified for static and seismic loading conditions (seismic design categories A through F)
    • Suitable for horizontal, vertical and overhead applications
    • Qualified for minimum concrete thickness of 3-1/4 in., and lightweight concrete-over-steel deck thickness of 2-1/2 in. and 3-1/4 in.
    • Tested per ACI355.2 and AC193
    Simpson Strong-tie STB2-75812 Product Page
    Add to cart
  • WA62100 Wedge-All 5/8 in. x 10 in. Expansion Anchor

    Standard Shipping

    $5.29

    Features:

    • One-piece, wrap-around clip ensures uniform holding capacity
    • Threaded end is chamfered for ease of starting nut
    • Diameter: 5/8 in.
    • Length: 10 in.
    • Made from zinc-plated carbon steel
    Simpson Strong-tie WA62100 Product Page
    Add to cart
  • WA75614 Wedge-All 3/4 in. x 6-1/4 in. Expansion Anchor

    Standard Shipping

    $3.37

    Features:

    • One-piece, wrap-around clip ensures uniform holding capacity
    • Threaded end is chamfered for ease of starting nut
    • Diameter: 3/4 in.
    • Length: 6-1/4 in.
    • Made from zinc-plated carbon steel
    Simpson Strong-tie WA75614 Product Page
    Add to cart
  • THD50300H Titen HD 1/2 in. x 3 in. Heavy-Duty Screw Anchor

    Standard Shipping

    $2.24

    Features:

    • Qualified for static and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
    • Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
    • Hex-washer head requires no separate washer and provides a clean installed appearance
    Simpson Strong-tie THD50300H Product Page
    Add to cart
  • THD50500HMG Titen HD 1/2 in. x 5 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    Standard Shipping

    $5.31

    Features:

    • Qualified for static and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
    • Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
    • Hex-washer head requires no separate washer and provides a clean installed appearance
    Simpson Strong-tie THD50500HMG Product Page
    Add to cart
  • THDB62400H Titen HD 5/8 in. x 4 in. Heavy-Duty Screw Anchor

    Standard Shipping

    $4.20

    Features:

    • Qualified for static and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
    • Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
    • Hex-washer head requires no separate washer and provides a clean installed appearance
    Simpson Strong-tie THDB62400H Product Page
    Add to cart
  • THD50600H Titen HD 1/2 in. x 6 in. Heavy-Duty Screw Anchor

    Standard Shipping

    $3.05

    Features:

    • Qualified for static and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
    • Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
    • Hex-washer head requires no separate washer and provides a clean installed appearance
    Simpson Strong-tie THD50600H Product Page
    Add to cart
  • WA75414 Wedge-All 3/4 in. x 4-1/4 in. Expansion Anchor

    Standard Shipping

    $2.66

    Features:

    • One-piece, wrap-around clip ensures uniform holding capacity
    • Threaded end is chamfered for ease of starting nut
    • Diameter: 3/4 in.
    • Length: 4-1/4 in.
    • Made from zinc-plated carbon steel
    Simpson Strong-tie WA75414 Product Page
    Add to cart
  • WA62812MG Wedge-All 5/8 in. x 8-1/2 in. Mechanically Galvanized Expansion Anchor

    Standard Shipping

    $6.68

    Features:

    • One-piece, wrap-around clip ensures uniform holding capacity
    • Threaded end is chamfered for ease of starting nut
    • Diameter: 5/8 in.
    • Length: 8-1/2 in.
    • Made from mechanically galvanized carbon steel
    Simpson Strong-tie WA62812MG Product Page
    Add to cart
  • DIAB50 DIAB Drop-In?Internally Threaded Anchor for 1/2-in. Rod

    Standard Shipping

    $0.65

    Features:

    • Faster installation than previous drop-in anchor design ? sets with 40% fewer hammer hits
    • Positive-set marking system indicates when anchor is properly set
    • Zinc-plated carbon steel
    • Length: 2 in.
    • Drill bit diameter: 5/8 in.
    Simpson Strong-tie DIAB50 Product Page
    Add to cart
  • WA62100MG Wedge-All 5/8 in. x 10 in. Mechanically Galvanized Expansion Anchor

    Standard Shipping

    $9.51

    Features:

    • One-piece, wrap-around clip ensures uniform holding capacity
    • Threaded end is chamfered for ease of starting nut
    • Diameter: 5/8 in.
    • Length: 10 in.
    • Made from mechanically galvanized carbon steel
    Simpson Strong-tie WA62100MG Product Page
    Add to cart
  • THDT75600H Titen HD 3/4 in. x 6 in. Heavy-Duty Screw Anchor

    Standard Shipping

    $7.83

    Features:

    • Qualified for static and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
    • Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
    • Hex-washer head requires no separate washer and provides a clean installed appearance
    Simpson Strong-tie THDT75600H Product Page
    Add to cart
  • STB2-758124SS Strong-Bolt 2 3/4 in. x 8-1/2 in. Type 304 Stainless-Steel Wedge Anchor

    Standard Shipping

    $20.15

    Features:

    • Chamfered top designed to prevent mushrooming during installation
    • Qualified for static and seismic loading conditions (seismic design categories A through F)
    • Suitable for horizontal, vertical and overhead applications
    • Qualified for minimum concrete thickness of 3-1/4 in., and lightweight concrete-over-steel deck thickness of 2-1/2 in. and 3-1/4 in.
    • Tested per ACI355.2 and AC193
    Simpson Strong-tie STB2-758124SS Product Page
    Add to cart
  • STB2-62600 Strong-Bolt 2 5/8 in. x 6 in. Wedge Anchor

    Standard Shipping

    $2.53

    Features:

    • Chamfered top designed to prevent mushrooming during installation
    • Qualified for static and seismic loading conditions (seismic design categories A through F)
    • Suitable for horizontal, vertical and overhead applications
    • Qualified for minimum concrete thickness of 3-1/4 in., and lightweight concrete-over-steel deck thickness of 2-1/2 in. and 3-1/4 in.
    • Tested per ACI355.2 and AC193
    Simpson Strong-tie STB2-62600 Product Page
    Add to cart
  • THD75400H Titen HD 3/4 in. x 4 in. Heavy-Duty Screw Anchor

    Standard Shipping

    $6.07

    Features:

    • Qualified for static and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
    • Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
    • Hex-washer head requires no separate washer and provides a clean installed appearance
    Simpson Strong-tie THD75400H Product Page
    Add to cart