Price

Category

Product Type

Applications

Brand

Showing all 5 results

  • AT-XP Acrylic AT-XP10 10oz

    Simpson Strong-Tie AT-XP10 AT-XP 9.4 oz. High-Strength Acrylic Anchoring Adhesive Cartridge w/ Nozzle

    Standard Shipping

    $29.10

    Features:

    • 10:1 two-component high-strength, acrylic-based anchoring adhesive
    • Suitable for use under static and seismic loading conditions in cracked and uncracked concrete as well as masonry
    • Easy hole-cleaning procedure ? no power-brushing required
    • Suitable for use in dry or water-saturated concrete
    • Low-odor formula dispenses easily at below-freezing temperatures without the need to warm cartridge

     

    Simpson Strong-tie AT-XP10 Product Page
    Add To CartLoading Done
  • XP30

    Simpson Strong-Tie AT-XP30 30-oz. High-Strength Acrylic Anchoring Adhesive Cartridge w/ Nozzle

    Standard Shipping

    $38.59

    Features

    • Excellent for use in cold weather conditions or applications where fast cure is required.
    • superior sustained load performance at elevated temperature.
    • can be specified for dry and damp conditions when in-service temperatures range from -40°F (-40°C) to 180°F (82°C).
    • Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to reduced and elevated temperatures and long-term sustained loads.
    • Easy hole-cleaning procedure — no power-brushing required.
    • Approved for installation with vacuum-drill bit system without further hole cleaning.
    Add To CartLoading Done
  • AT3G10

    [Pallet of 576] Simpson Strong-Tie AT3G10 9.5-oz. High-Strength Acrylic Anchoring Adhesive Cartridge w/ Nozzle

    Oversized Shipping

    $11,108.49

    Features

    • AT3G10 is excellent for use in cold weather conditions or applications where fast cure is required
    • Recognized per ICC-ES AC308 for threaded rod and rebar anchoring, along with post-installed rebar development and splice length design provisions
    • Conventional blow-brush-blow hole cleaning technique using a wire brush — no power brushing required
    • Base material installation temperatures down to 0°F (-18°C)
    • Use in grout-filled CMU construction
    Add To CartLoading Done
  • ET3G22-N

    Simpson Strong-Tie ET3G56 56-oz. Epoxy Adhesive Cartridge

    Standard Shipping

    $97.39

    Features

    • ET3G56 is suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
    • Ideal for general doweling and threaded rod applications
    • Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)
    Add To CartLoading Done
  • AT-XP13

    Simpson Strong-Tie AT-XP13 High-Strength Acrylic Anchoring Adhesive Cartridge w/ Nozzle

    Standard Shipping

    $40.37

    Features

    • Excellent for use in cold weather conditions or applications where fast cure is required.
    • superior sustained load performance at elevated temperature.
    • can be specified for dry and damp conditions when in-service temperatures range from -40°F (-40°C) to 180°F (82°C).
    • Approved for installation with vacuum-drill bit system without further hole cleaning.
    • Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to reduced and elevated temperatures and long-term sustained loads.
    • Easy hole-cleaning procedure — no power-brushing required.
    Add To CartLoading Done