Showing 201–240 of 254 results
-
Free Shipping
$747.50
Features
- X2 LXT® technology delivers up to 140 1/2″ x 2-3/8″ holes per charge using two 18V LXT® 5.0Ah batteries
- Powerful BL™ Brushless motor delivers 0-980 RPM, 0-5,000 BPM and 2.3 ft.lbs. of impact energy to handle the most demanding applications
- Dust extraction capability with optional OSHA Table 1 compliant On-Board Dust Extractor Attachment
- Anti-Vibration Technology (AVT®) is an active internal counterbalance system which is engineered to reduce vibration for increased comfort
- Vibration-absorbing back handle and side handle further reduce vibration and increase comfort on the job
-
Free Shipping
$381.25
Features
- Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- Compact and ergonomic design at only 12-7/8″ long
- Weighs only 7.2 lbs. with battery (battery not included) for reduced operator fatigue
- Variable speed trigger enables user to match the speed to application for greater versatility
-
Free Shipping
$200.00
Features
- Makita-built variable speed motor delivers 0-1,200 RPM and 0-4,000 BPM
- 3-mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only” for multiple applications
- Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
- Faster drilling with synchronized RPM and BPM
- Job site tested shock absorbent handle protects the battery housing for extra durability
-
Free Shipping
$438.75
Features
- Makita- build brushless motor delivers up to 35% faster cutting speed
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- Metal reinforced gear shaft and self-lubricating slider for increased durability
- Makita-built variable 2-speed brushless motor delivers 0-2,300 (Low) and 0-3,000 (High) strokes per minute
- Long 1-1/4″ stroke length provides increased cutting efficiency
-
Free Shipping
$440.00
Features
- Powered by two LXT® batteries; X2 LXT® technology delivers more power, speed and run time without the hassles of a cord
- Makita-built electronically controlled brushless motor delivers 5,100 RPM for maximum performance and 50% longer run time per charge
- The brushless motor eliminates carbon brushes, enabling the motor to run cooler and more efficiently for longer life
- Automatic Speed Change™ technology adjusts cutting speed and torque during cut for optimum performance
- X2 LXT® technology delivers up to 558 crosscuts per charge in 2×4 SPF lumber and up to 291 crosscuts per charge in 2×10 SPF lumber using the two 5.0Ah batteries
-
Free Shipping
$557.50
Features
- Selectable horizontal/vertical cross reference lines required for level, align and plumb applications
- Up to 10 hours of continuous run time using included Makita 12V max CXT® 2.0Ah rechargeable battery; up to 20 hours of continuous run time using a 12V max CXT® 4.0Ah battery
- Green line visibility range up to 115’ depending on ambient light and detectable up to 262′ with Makita Laser Detector LE00855702 (sold separately)
- Bright 525 nm class II green laser for best-in-class visibility with +/-1/8” at 33’ for best-in-class accuracy
- Laser line fan angle spans past the 180° horizontal line and 160° vertical line positions for full reference line coverage
-
Standard Shipping
$172.50
Features
- Equipped with Bluetooth® to wirelessly connect your mobile device
- Lantern delivers up to 310 lumens in a 360° pattern
- High-luminance L.E.D. flashlight provides 200 lumens
- Push-button operated digital tuner with 9 programmable stations for FM radio
- Radio runs up to 28 hours; Lantern runs 16 hours; Lantern and Radio run 10 hours with an 40V max XGT® 2.5Ah battery (battery not included)
-
Standard Shipping
$156.25
Features
- 4-mode operation: delivering 600 lumens on Spot, 1,000 lumens on Flood, 1,250 lumens on Spot/Flood, and Strobe mode
- Illuminates up to 640 yards in Spot and Spot/Flood mode
- Up to 10 hours of continuous illumination in Spot mode with 4.0Ah 40V max XGT® battery (battery not included)
- 90º pivoting head for user convenience
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
-
Standard Shipping
$105.25
Features
- High-luminance 18 L.E.D. flashlight provides 500 lumens on high
- 3-mode operation: delivers 500 lumens on High, 250 lumens on Medium, and 100 lumens on Low
- Flashlight head folds up and down with 7 positive stops and rotates left to right for multiple lighting angles
- Up to 82 hours of illumination with 4.0Ah 40V max XGT® Battery (battery sold separately)
- Up to 51 hours of illumination with 2.5Ah 40V max XGT® Battery (battery sold separately)
-
Standard Shipping
$63.12
Features
- High-luminance 4 L.E.D. flashlight provides 160 lumens
- 170° pivoting head with 12 positive stops
- Up to 55 hours of illumination with 4.0Ah 40V max XGT® Battery (battery sold separately)
- Up to 34 hours of illumination with 2.5Ah 40V max XGT® Battery (battery sold separately)
- Metal hang hook is convenient and job site durable
-
Standard Shipping
$85.00
Features
- 360° lantern mode provides 710 lumens; 180° lantern mode provides 340 lumens; flashlight mode provides 130 lumens
- Built-in USB port for charging portable electronic devices
- Metal hang hook swivels 360° and folds away for added convenience
- Up to 10 hours of continuous illumination in 360° lantern mode with 2.5Ah 40V max XGT® Battery (battery sold separately)
- Up to 18 hours of continuous illumination in 180° lantern mode with 2.5Ah 40V max XGT® Battery (battery sold separately)
-
Free Shipping
$381.25
Features
- 3-mode operation: delivers 10,000 lumens on High, 4,000 lumens on medium, and 2,000 lumens on Low
- Up to 2.4 hours of continuous illumination with two 4.0Ah 40V max XGT® batteries on high (batteries and charger not included)
- Up to 14 hours of continuous illumination with two 4.0Ah 40V max XGT® batteries on low (batteries and charger not included)
- Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions
- L.E.D. lights effectively illuminate work area without the high heat of halogens
-
Free Shipping
$237.50
Features
- 3-mode operation: delivers 3,600 lumens on High, 1,800 lumens on Medium, and 900 lumens on Low
- Up to 3.5 hours of continuous illumination with a 4.0Ah 40V max XGT® battery on high (battery and charger not included)
- Up to 15 hours of continuous illumination with a 4.0Ah 40V max XGT® battery on low (battery and charger not included)
- Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions
- L.E.D. lights effectively illuminate work area without the high heat of halogens
-
Standard Shipping
$186.25
Features
- 2-mode operation: delivers 1,100 lumens on High and 450 lumens on Low
- Up to 22 hours of continuous illumination on low with a 4.0Ah 40V max XGT® (battery and charger not included)
- Up to 10 hours of continuous illumination on high with a 4.0Ah 40V max XGT® (battery and charger not included)
- Compatible with Makita® 40V max XGT® and 18V LXT® batteries (batteries not included)
- Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions
-
Free Shipping
$805.00
Features
- Makita-built brushless motor delivers up to 2X faster cutting performance*
- Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of bit is suddenly forced to stop
- XPT is engineered to provide increased dust and water resistance in harsh jobsite conditions
- Large 2-5/8″ cutting capacity in various metal materials including pipe, stud, channel, strut, conduit, angle, square tubing, sheet metal, and more
- Makita-built brushless motor delivers up to 160 cuts per charge in 2-1/2″ x 2-1/2′ x 1/4″ steel angle using a 40V max XGT® 4.0Ah Battery
-
Free Shipping
$57,375.00
Features
- Makita-built brushless motor delivers up to 2X faster cutting performance*
- Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of blade is suddenly forced to stop
- XPT is engineered to provide increased dust and water resistance in harsh job site conditions
- Large 2-5/8″ cutting capacity in various metal materials including pipe, stud, channel, strut, conduit, angle, square tubing, sheet metal, and more
- Makita-built brushless motor delivers up to 160 cuts per charge in 2-1/2″ x 2-1/2′ x 1/4″ steel angle using a 40V max XGT® 4.0Ah Battery (battery not included)
-
Free Shipping
$385.00
Features
- Makita-built brushless motor delivers 4,000 RPM for up to 2X faster cutting than corded
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
- Extra Large 3-3/4″ cutting capacity at 90°; cuts 4X material in a single pass
- Up to 150 cuts per charge in 4×4 SPF lumber on a single charge of a 4.0Ah battery (battery not included)
-
Free Shipping
$556.25
Features
- Makita-built brushless motor delivers 4,000 RPM for faster cutting than corded
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
- Extra Large 3-3/4″ cutting capacity at 90°; cuts 4X material in a single pass
- Up to 150 cuts per charge in 4×4 SPF lumber on a single charge of a 4.0Ah battery
-
Free Shipping
$283.75
Features
- Makita-built brushless motor delivers up to 6,400 RPM for faster cutting performance
- Automatic Torque drive adjusts cutting speed under load for optimum cutting performance
- XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
- Up to 375 cuts per charge in 2X4 SPF lumber (battery no included)
- Power of a 15 AMP corded*
-
Free Shipping
$461.25
Features
- Makita-built brushless motor delivers up to 6,400 RPM for faster cutting performance
- Automatic Torque drive adjusts cutting speed under load for optimum cutting performance
- XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
- 2-9/16″ cutting depth allows cutting of 3X lumber in a single pass
- Electric brake for maximum productivity
-
Free Shipping
$375.00
Features
- Makita-built brushless motor delivers 6,000 RPM for faster cutting performance
- Automatic torque drive adjusts cutting speed under load for optimum cutting performance
- XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
- 0-56° bevel capacity with positive stops at 22.5°, 45°
- Large 2-3/8″ cutting capacity at 90°
-
Free Shipping
$283.75
Features
- Makita-built brushless motor delivers 6,000 RPM for faster cutting performance
- Automatic Torque drive adjusts cutting speed under load for optimum cutting performance
- XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
- Large 2-5/8″ cutting capacity at 90°; cuts 3X material in a single pass
- 0-56° bevel capacity with positive stops at 22.5°, 45°, and 56°
-
Free Shipping
$471.25
Features
- Makita-built brushless motor with variable speed control dial (2,500 – 4,900 RPM) for faster cutting performance
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- The digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating
- Large cutting capacity 2-3/16″ at 90º; and 1-9/16″ at 45º
- Bevel capability (-1º to 48º) with positive stops at 22.5º and 45º
-
Free Shipping
$702.50
Features
- Makita-built brushless motor with variable speed control dial (2,500 – 4,900 RPM) for faster cutting performance
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- The digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating
- Large cutting capacity 2-3/16″ at 90º; and 1-9/16″ at 45º
- Bevel capability (-1º to 48º) with positive stops at 22.5º and 45º
-
Free Shipping
$625.00
Features
- Makita-built brushless motor delivers 3,500 RPM for faster cutting performance
- Constant speed control automatically applies additional power under load for optimum performance
- XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
- Bevel cut capacity up to 1° left and 60° right with positive stops at 22.5°, 45°
- Large 3-13/16″ cutting capacity at 90°
-
Free Shipping
$612.50
Features
- Outpower: Makita-built brushless motor delivers 4,000 RPM for faster cutting performance
- Outsmart: Constant speed control automatically applies additional power under load for optimum performance
- Outlast: XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
- Bevel cut capacity up to 1° left and 60° right with positive stops at 22.5°, 45°
- Large 3-3/8″ cutting capacity at 90°
-
Special Order Shipping
$122.25
Features
- 4-mode operation: delivering 600 lumens on Spot, 1,000 lumens on Flood, 1,250 lumens on Spot/Flood, and Strobe mode
- Illuminates up to 700 yards in Spot and Spot/Flood mode
- Up to 7 hours of continuous illumination in Spot mode with 5.0Ah 18V LXT® battery (battery not included)
- 90º pivoting head for user convenience
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
-
Free Shipping
$543.50
Features
- Self-righting design keeps work light in upright position
- 3-mode operation: delivers 5,500 lumens on High, 3,000 lumens on medium, and 1,500 lumens on Low
- 3 illumination range modes: 360º, left 180º, and right 180º
- Battery or corded operation; compatible with 18V LXT® batteries (batteries and charger not included)
- Up to 3.3 hours of continuous illumination with two 5.0Ah 18V LXT® battery on high (batteries and charger not included)
-
Free Shipping
$434.75
Features
- Three adjustable light heads rotate 180° vertically
- Extends to an overall height of 7-1/4 ft. with a foldable design for quick setup and takedown
- 3-mode operation; delivers 3,000 lumens on High, 1,700 lumens on Medium, and 900 lumens on Low
- Daylight white L.E.D.s produce a clearer light
- L.E.D. lights effectively illuminate work area without the high heat of halogens
-
Free Shipping
$218.75
Features
- 3-mode operation: delivers 3,000 lumens on High, 1,500 lumens on medium, and 750 lumens on Low
- Up to 3 hours of continuous illumination with a 6.0Ah 18V LXT® battery on high (battery and charger not included)
- Up to 13 hours of continuous illumination with a 6.0Ah 18V LXT® battery on low (battery and charger not included)
- Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions
- L.E.D. lights effectively illuminate work area without the high heat of halogens
-
Standard Shipping
$159.00
Features
- Mechanical 2-speed transmission (0-500 & 0-1,900 RPM) for a wide range of drilling and fastening applications
- Makita-built brushless motor delivers 440 in.lbs. of Max Torque
- Weighs only 3.6 lbs. with battery for reduced operator fatigue
- Built-in dual L.E.D. lights with afterglow illuminate the work area
- 3-year limited warranty on tool, battery and charger
-
Free Shipping
$440.00
Features
- Powered by two LXT batteries; X2 LXT technology delivers more power, speed and run time without the hassles of a cord
- Makita built electronically controlled BL™ Motor delivers 6,000 RPM for maximum performance and 50% longer run time per charge
- X2 LXT® technology delivers up to 610 crosscuts per charge in 2×4 SPF lumber and up to 320 crosscuts per charge in 2×10 SPF lumber using two 5.0Ah batteries
- Large 2-5/8” cutting capacity at 90°
- Electric brake for maximum productivity
- 0°- 56° bevel capacity with positive stops at 22.5°, 45°, and 56°
-
Free Shipping
$284.99
This item has been DISCONTINUED.
-
Standard Shipping
$139.00
Features
- Cordless angle grinder delivers 8,000-RPM for high-power cutting and grinding applications
- Quick-change™ wheel release allows for tool free wheel changes without the need for a wrench
- Tool-free guard allows for quick, easy guard adjustments/positioning
- 2-finger trigger switch with lock-off button for convenient activation and easier gripping
- 2-position side handle provides greater control, comfort and versatility when in use
- 20-volt rechargeable battery required (battery and charger sold separately)
- 2-position side handle offers greater control, comfort and versatility
-
Standard Shipping
$99.00
Features
- 360-Degree Handle For Multiple Orientation Use
- Powerful Brightness at 2,000-Lumen Output
- Natural Daylight Hue
- IP54 Rated – Water and Dust Ingress Protection
- Compact and lightweight at only 3-lbs. (tool only)
- Tripod Mountable – 5/8-in-11 and 1/4-in-20
-
Free Shipping
$406.00
Features
- DEWALT built brushless motor and XR Li-ion batteries deliver more run time and capacity over standard units
- 3-speed settings for optimized application versatility
- Precision drive in speed 1 for precision applications and added control
- 3 LED lights with 20 second delay after trigger release, provide visibility without shadows
- 1-handed loading 1/4-in hex chuck with easy grip sleeve, accepts 1-in bit tips
- Compact and lightweight design to fit into tight areas (6 mm shorter than the previous DCF886)
- Includes 1 DCF887 20-volt MAX XR 1/4-in 3-speed impact driver, two 4.0-Ah 20-volt MAX XR batteries, 1 fast charger, 1 belt hook
-
Free Shipping
$379.00
Features
- Centered handle position provides superior balance and ergonomics and allows for more accurate cuts and less user fatigue
- LED work light with 20 second delay illuminates dark work surfaces for accurate cutting
- Integrated hang hook allows user to hang the saw without damaging the front handle or base
- Blade tracking adjustment increases blade life by providing better blade tracking
- Tool-free blade changing lever loosens blade tension to allow for blade change
- Dual-bearing blade guide rollers provides increased durability in the blade support system
- Ergonomic soft grip back handle provides comfort and flexibility
-
Free Shipping
$559.00
Features
- OSHA Table 1 Compliant when paired with DWH303DH On Board Extractor
- Brushless motor and durable German-engineered mechanism for efficient performance and runtime.
- Rotating Dial to set tool to a specific application mode – Drill, Hammer Drill, or Chip.
- SHOCKS™- Active Vibration Control significantly reduces vibration and increases user comfort and productivity, A Perform and Protect Feature
- 2.1 Joules impact energy provides corded power without the cord
-
Free Shipping
$249.00
Features
- UP TO 50% MORE POWER WITH FLEXVOLT® BATTERIES
- FAST CUTTING: 1-1/8 in. stroke length delivers a fast cutting speed
- EASY BLADE CHANGES: Keyless lever-action blade clamp for quick and easy blade changes
- BLADE CONTROL: Variable-speed trigger with 0-3,000 spm provides blade control
- INCREASED VISIBILITY: Bright LED for better visibility in low-light work areas
- Tool Connect™ Chip Ready: Chip pocket accepts Tool Connect™ Chip DCE042 and connects with Tool Connect™ Site Manager app for easy asset management on the jobsite. (DCE042 sold separately)
- COMPATIBLE with all DEWALT® 20V MAX* and FLEXVOLT® Batteries
