Showing 2961–3000 of 7316 resultsSorted by popularity
-
$6.85
Features:
- Four-cutter full-head carbide for up to 4X life in concrete with rebar
- Centering tip for precise anchoring-hole placement
- Integrated wear mark indicates end-of-life
- Variable (4-2-2) flute design pulls dust away to reduce heat and boost productivity
- Bosch-made carbide for durability
- SDS-plus shank for use with SDS-plus rotary hammers
-
$219.00
Features:
- 8.0 Amp motor delivers 2.0 Ft.-Lbs. of impact energy
- 3 operation modes: rotary hammer, rotation only, hammer only
- Vario-Lock rotates and locks chisel in 36 positions
- Integral clutch helps protect against bind-up
- Variable-speed trigger with reverse for accurate starts
- D-handle design for comfortable overhead/downward drilling
- SDS-plus bit system enables tool-free bit changes
-
$11.89
Features:
- Type 1A/41 straight cutting wheel for cutoff machines
- Designed for cutting metal and stainless steel; no grinding
- Optimized for 90-degree cutting with powerful performance
- 14 in. diameter with 1 in. arbor and 0.125 in. thickness
- Single wheel pack
-
$58.23
Features:
- Engineered SDS-plus Bulldog bit for rotary hammer drills
- 4-cutter head drills through rebar effectively
- High-quality tough tungsten carbide for long life in reinforced concrete
- 4-flute design improves dust removal and drilling efficiency
- 3/16 in diameter, 4 in working length, 6 in overall; 25-pack
-
$79.21
Features:
- 7/8 in. diameter, 6 in. length spade bit designed for fast, clean wood drilling
- Fully threaded tip pulls the bit through wood for speed
- Contoured paddle with spur-and-reamer tips for cleaner holes and chip removal
- 1/4 in. shank fits most corded and cordless drills
- Blue Daredevil finish; 40-piece bulk pack
-
$3.25
Features:
- 50-piece 3/8 in. x 6 in. Daredevil standard spade bits
- Fully threaded tip pulls the bit through wood for fast drilling
- Contoured paddle design for quicker chip evacuation
- Spur-and-reamer tips help deliver cleaner holes with reduced blowout
- 1/4 in. hex shank for use with corded or cordless drills
-
$5.95
Features:
- Speed drilling up to 10X faster than conventional spade bits
- Fully threaded tip pulls the bit for fast, effortless cutting
- Contoured paddle design improves chip removal and speed
- Spur-and-reamer tips for extra-clean hole entry and reduced blowout
- For use with corded and cordless drills
-
$5.95
Features:
- Speed drilling up to 10X faster than conventional spade bits
- Fully threaded tip pulls the bit through wood for fast starts
- Contoured paddle design for quicker chip removal
- Spur-and-reamer tips for cleaner hole entry and reduced blowout
- 1/4 in. hex shank for use with corded and cordless drills
-
$5.57
Features:
- Fully threaded tip pulls the bit through wood for fast drilling
- Contoured paddle design for rapid chip removal and speed
- Spur-and-reamer tips pre-cut wood for cleaner holes with less blowout
- Designed for use with corded and cordless drills
- Blue finish Daredevil spade bit with 1/4 in. hex shank
-
$5.57
Features:
- Fast wood drilling up to 10X faster than conventional spade bits
- Fully threaded tip pulls the bit through wood for speed
- Contoured paddle design accelerates chip removal
- Spur-and-reamer tips for cleaner hole entry and reduced blowout
- 1/4 in. shank; 1-1/4 in. diameter; 6 in. length; 25 pieces
-
$5.57
Features:
- 1-3/8 in. diameter Daredevil standard spade bit
- Fully threaded tip pulls the bit through wood for fast drilling
- Contoured paddle design for quicker chip removal
- Spur-and-reamer tips help produce cleaner holes with reduced blowout
- Designed for use with corded and cordless drills
-
$3.00
Features:
- Speed drilling design delivers up to 10X faster performance than conventional spade bits
- Fully threaded tip pulls the bit through wood for outstanding speed
- Contoured paddle improves chip removal to maintain fast drilling
- Spur-and-reamer tips pre-cut wood for cleaner holes with reduced blowout
- For use with corded and cordless drills; 1/4 in. diameter, 6 in. length, 1/4 in. shank
-
$74.78
Features:
- 3/4 in. diameter, 6 in. length spade bit with 1/4 in. shank
- Fully threaded tip pulls the bit through wood for fast drilling
- Contoured paddle design for rapid chip removal
- Spur-and-reamer tips for extra-clean hole entry and reduced blowout
- For use with corded or cordless drills; ideal for wood applications
-
$3.35
Features:
- Daredevil Standard Spade Bits for extra-clean results
- Speed drilling up to 10X faster than conventional spade bits
- Fully threaded tip pulls the bit through wood for fast drilling
- Contoured paddle design for faster chip removal
- Spur-and-reamer tips pre-cut wood for cleaner holes
-
$5.23
Features:
- Four-cutter full-head carbide for up to 4X life in concrete with rebar
- Centering tip for precise anchoring-hole placement
- Integrated wear mark indicates end of life
- Variable 4-2-2 flute design pulls dust away to reduce heat
- SDS-plus shank for use with SDS-plus rotary hammers
-
$3.75
Features:
- 1 in. x 6 in. Daredevil standard spade bits for fast, clean wood drilling
- Fully threaded tip pulls the bit through wood for speed
- Contoured paddle design for faster chip removal
- Spur-and-reamer tips help reduce blowout and leave cleaner holes
- Pack of 30 bits for high-volume jobs
-
$5.21
Features:
- Type 1A straight cutting wheel for cutoff machines
- 9 in. diameter, 7/8 in. arbor, .075 in. thickness
- 36-grit WA for stainless and metal cutting
- Designed for cutting only; no grinding
- Use at a 90-degree angle
-
$179.00
Features:
- 46CFM suction performance
- 65 Air Watts with a 5.0Ah DCB205 battery pack (sold separately)
- 6 Accessory cleaning solutions
-
$249.99
Features
- 2.6 Joules of impact energy
- Rotating dial to set tool mode
- Lightweight design
-
$639.99
Features
- 10.5 Joules of impact energy
- Constant speed electronics allows the tool to maintain speed under load
- E-CLUTCH system
- WIRELESS TOOL CONTROL
-
$449.99
Features
- 3.5 Joules of impact energy for fast drilling in concrete
- Anti-Rotation E-CLUTCH System
- Lightweight design
-
$79.99
Features
- High efficiency and versatility
- Increased diamond bond strength
- Quickly execute deep, accurate cuts
-
$74.99
Features
- Long Life
- Straight Cuts
- Cuts a wide variety of materials
- Optimized design for Flexvolt 9in Cutoff saw (DCS690)
-
$19.99
Features
- NSF Registered
- OSHA & Regulatory Compliance
- Heavy-Duty Cleaning
- 6002 0046-2 is dermatologically tested to be skin-friendly
-
$178.63 – $3,089.48Price range: $178.63 through $3,089.48
Features
- RB443T Ties up to #7 rebar with ease
- JE400 Extension Arm mounts in seconds and saves you from bending over to tie
- JPL91450A 5AH Li-on battery keeps you in the game with extended run time.
-
$81.99
Features
- Voltage: 110V
- Max Hp: 2/3 HP
- Max current: 13 A
- TS-301 offers an adjustable tether
- Cord length: 30 Ft
-
$16.99
Features
- SD9212R100-R is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
$269.99
Features
- SD9212MB is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
$85.99
Features
- SD10212R500 is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
$314.99
Features
- SD10212MB is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
$61.99
Features
- SD10112R500 is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
$333.99
Features
- SD10112MB is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
Technical and Installation Notes
-
-
13% OFF
$14.99 Original price was: $14.99.$12.99Current price is: $12.99.
Features
- 3041020 offers a tapered tri-flute design for faster chip ejection and less binding.
- faster, cleaner holes, less breakout, and extended drilling life.
- Full screw-point tip allows bit to self-feed for ease of drilling.
-
$584.99
Features
- PROSDDD25K supports various attachments
- Enhanced Stability and Control
- Expanded Depth Settings and Uniform Performance
- Complete Kit with Convenient Additions
Quik Drive Screw Drivers
-
$584.99
Features
- PROSDDM25K is made to support several attachments
- Precision Depth Control
- Enhanced Stability
- Efficient Operation
Quik Drive Screw Drivers
-
$210.34
Features
- Increased 5 Amp Hour Capacity
- 25.2V Lithium Ion
- Seamless compatibility
- Compatible with JC925A Charger
-
$584.99
Features
- PROSDDM35K excels in high-density flooring materials
- Reversible and replaceable nonskid teeth
- Increased stability for a broad range of screws
Quik Drive Screw Drivers
-
$42.99
Features
- EIP-EZAKT is leak-free connection minimizes waste and cleanup
- No-drill installation for quick setup
- Auto-stop flow prevents messy spills
- Pull-to-close port design reduces leakage
Injection Guide
-
$29.99
Features
- EMNO22-RP6 offers precise mixing
- Flow regulation
- Versatile use
- Enhanced consistency
Injection Guide
