Showing 2801–2840 of 7316 resultsSorted by popularity
-
$609.99
Features:
- 1.5 HP electric motor with rugged shock-absorbing frame
- Watertight, strain-relief power cord; switch protected by frame
- Up to 1-3/4 in max head diameter; compatible with shafts up to 42 ft (with connector)
- Factory-sealed heads require no maintenance
- 115V, 13 amp; built to withstand tough jobsite use
-
$329.99
Features:
- 2-1/2″ steel head for concrete vibration
- Fits standard and pencil flexible shafts
- High-performance eccentrics
- Lubricated with synthetic oil; maintenance-free
- Made in USA; lifetime warranty
-
$119.99
Features:
- 3/4 in steel vibration head
- 12 in head length
- Fits standard or pencil flexible shafts
- High-performance eccentrics; maintenance-free sealed design
- Lubricated with synthetic oil
- Made in USA; lifetime warranty
-
$106.99
Features:
- Connects two Northrock flexible shafts
- Durable construction for jobsite use
- Genuine Northrock replacement part
-
$2,199.99
Features:
- 4-stroke Honda GXH50 engine ? runs on regular gas
- High-efficiency belt drive with cast aluminum housing
- Universal counter shaft fits most shafts and heads
- Backpack frame with ergonomic padding and shoulder straps
- Powers vibrating heads from 3/4 in to 2-1/2 in
-
$59.99
Features:
- Genuine Northrock replacement power cord pigtail (SKU: 505G1)
- NEMA 5-15 male plug to 5-15R female connector for standard household power
- Short, flexible adapter for reliable connection to equipment
-
$59.99
Features:
- Genuine Northrock 150DW1 casing adapter
- Compatible with Rebar Rocker equipment
- Durable metal construction for long service life
- Includes mounting screws (as shown)
-
$529.00
Features:
- Accurate within ±1/8 in. at 30 ft. for precise plumb and level lines
- 20V MAX and 12V MAX compatible for flexible power options
- Up to 17 hours runtime with included 20V MAX 2Ah battery
- Self-leveling cross-line green laser with individual line/spot control
- Magnetic mount, fine adjust knob, rotating head and locking pendulum
- Kit includes battery, charger, ceiling/wall bracket, target and TSTAK case
-
$98.99
Features:
- Precision Point Technology for accurate nail placement
- Drives 18 Ga. brad nails from 5/8 in. to 2-1/8 in.
- Long-life, maintenance-free motor helps avoid staining work surface
- Tool-free depth adjustment and jam release
- Rear exhaust and adjustable belt hook
-
$19.99
Features:
- Extra-coarse finish from full cable knotted carbon steel wires
- Narrow face design reaches tight spaces
- Rugged, precision-balanced construction for high RPM use (up to 20,000)
- Ideal for bead weld preparation and aggressive brushing
- For small and large angle grinders with locking nut, and straight grinders
-
$22.99
Features:
- 3 in. wheel diameter with 5/8 in.-11 arbor
- Stainless steel knotted wire, single-row cup brush
- For heavy-duty cleaning on small/mini angle grinders
- Removes weld scale, burrs, and corrosion; prepares surfaces for paint
- Precision-balanced cup reduces vibration
-
$22.99
Features:
- Replacement paper dust bags for Bosch VAC090A/VAC090S
- Acts as a pre-filter to capture large debris and extend main filter life
- Designed for dry materials only
- Each bag fits 9-gallon dust extractors; capacity approx. 1.45 ft³
- Convenient disposal with port cover; 5 bags per pack
-
$19.95
Features:
- Impact Tough design for use with rotary and impact drill/drivers
- No-skate tip for accurate starts
- Engineered for heavy-gauge and high-carbon steel
- Long flutes for efficient chip removal
- Impact-rated hex shanks for higher torque applications
-
$4.09
Features:
- Bi-Metal Edge blades for wood with nails and all-purpose cutting
- Turbo-Teeth technology lasts up to 3x longer than standard blades
- Precision-ground teeth start sharp and stay sharper
- Progressive 6/12 TPI for fast, versatile cuts
- 9 in. length for deeper cutting capacity
-
$51.49
Features:
- Edge series bi-metal blades for all-purpose cutting
- Turbo-Teeth technology lasts up to 3X longer than standard blades
- Precision-ground teeth start sharp and stay sharper
- 6 in. length, 6/12 TPI progressive tooth pitch for wood with nails and plastics
- Bulk pack of 25 blades for high-volume use
-
$85.49
Features:
- Bi-Metal construction for all-purpose cutting
- Turbo-Teeth technology lasts up to 3X longer than standard blades
- Engineered for extreme cuts in demanding applications
- Precision-ground teeth start sharp and stay sharper
- 12 in. length with progressive 6/12 TPI for wood with nails, plastics, and more
-
$769.00
Features:
- 8.2 ft-lbs EPTA impact energy for top drilling and chiseling performance
- SDS-max bit system with tool-free bit changes and automatic bit-locking
- Vario-Lock rotates chisel into 12 positions for optimal working angle
- Variable speed dial for controlled drilling and chipping
- Service Minder light indicates when maintenance is required
- Soft-grip rear handle and 360° auxiliary handle for comfort
-
$97.69
Features:
- Bi-Metal Edge blades designed for wood, plastics, steel, and construction wood
- Turbo-Teeth technology for up to 3X longer life vs. standard recip blades
- Precision-ground teeth start sharp and stay sharp
- Progressive 10/14 TPI for fast, controlled flush cuts
- 12-inch length ideal for deep and flush cutting applications
-
$4.19
Features:
- Impact Tough design delivers up to 10X life over standard bits
- Xtended Torsion Zone absorbs torque peaks to reduce breakage
- Precision-engineered tip for better fit and less cam-out
- Heat-treated for strength and durability
- 1/4 in. external hex shank for impact drivers and drill/drivers
-
$4.29
Features:
- Impact Tough design for high durability with impact drivers
- Xtended Torsion Zone helps absorb torque peaks to reduce breakage
- Precision-engineered tip for better fit and reduced cam-out
- Heat-treated manufacturing for a stronger bit
-
$3.69
Features:
- Driven design with torsion zone built to last
- Hardened surface and precision-milled tip for better fit and less cam-out
- Heat-treated manufacturing for durability
- 1/4 in. external hex shank; 1-7/8 in. overall length
-
$16.99
Features:
- 1 in. cutting edge and 16 in. overall length
- SDS-max shank fits most SDS-max rotary and demolition hammers
- R-Tec self-sharpening design for less binding and consistent performance
- Ideal for precision concrete removal and hard surface break-up
- One-piece durable construction
-
$26.99
Features:
- Wide 1-1/2 in. cutting edge for efficient material removal
- Optimized for faster chipping and increased breakout
- Proprietary heat-treated steel for durability
- SDS-plus shank fits compatible rotary hammers and demolition hammers
- Ideal for concrete, brick, and masonry
-
$108.99
Features:
- Four-cutter full-head carbide design for up to 4X life in concrete with rebar
- Centering tip enhances precision for anchoring holes
- Integrated wear mark indicates when bit is fully worn
- Variable 4-2-2 flute design pulls dust away to reduce heat and increase efficiency
- SDS-plus shank for use with SDS-plus rotary hammers
-
$34.99
Features:
- SDS-max SpeedX rotary hammer bit for long-life drilling in reinforced concrete
- Inclined side cutters for fastest concrete drilling
- Compact head design for rapid dust removal and extended bit life
- Active-centering tip for quick, accurate starts
- Wear mark indicator helps maintain hole-diameter accuracy
-
$31.99
Features:
- High-quality tungsten carbide tip for strength and durability
- 4-cutter head drills through rebar effectively
- 4-flute design for efficient dust removal
- SDS-plus shank for secure, tool-free bit changes
- Designed for rotary hammer drills
-
$26.89
Features:
- Longer life drilling in reinforced concrete
- High-quality, tough tungsten carbide for strength and durability
- 4-cutter head drills through rebar effectively
- 4-flute design for efficient dust removal
-
$21.09
Features:
- Designed for rotary hammer drills with SDS-plus shanks
- 4-cutter carbide head drills through rebar effectively
- 4-flute design improves dust removal for faster drilling
- High-quality tungsten carbide for strength and durability
- Working length 10 in; overall length 12 in; 5/8 in diameter
-
$16.49
Features:
- Longer life drilling in reinforced concrete
- High-quality, tough tungsten carbide tip for durability
- 4-cutter head drills through rebar effectively
- 4-flute design for efficient dust removal
-
$86.49
Features:
- Bulldog SDS-plus design for rotary hammer drills
- Longer life in reinforced concrete with tough tungsten carbide
- 4-cutter head drills through rebar effectively
- 4-flute design for efficient dust removal
- 1/4 in diameter, 4 in working length, 6 in total length
- Pack of 25 bits
-
$4.49
Features:
- Designed for rotary hammer drills with SDS-plus shank
- 4-cutter head drills through rebar effectively
- High-quality tungsten carbide tip for strength and durability
- 4-flute design improves dust removal and drilling speed
- Ideal for concrete, reinforced concrete, brick, and hard stone
-
$6.99
Features:
- Designed for rotary hammer drills with SDS-plus shanks
- High-quality tungsten carbide tip for strength and durability
- 4-cutter head helps drill through rebar
- 4-flute design improves dust removal
- 5/32 in. diameter, 4 in. working length, 6 in. total length
-
$4.49
Features:
- Type 27 depressed-center grinding wheel for metal grinding
- 4-1/2 in diameter, 1/4 in thickness with 5/8-11 hub arbor
- 30-grit aluminum oxide for high-tensile materials
- Optimized for flat-surface weld prep; best used at ~30° angle
- Fits small angle grinders
-
$499.00
Features:
- All-in-one 360° three-plane level and alignment with one horizontal and two vertical green-beam lines
- Power flexibility: 3.7V Li-Ion 3.0Ah battery included, AA battery adapter, and USB‑C charging
- IP65 jobsite-tough housing with full rubber overmold and rubber grip base
- VisiMax technology optimizes visibility and extends battery life; power-saving mode
- 100 ft range (1/8 in at 30 ft accuracy); up to 260 ft with receiver (sold separately)
- Smart Pendulum self-levels, indicates out-of-level, and locks for transport
- Magnetic L‑bracket and 1/4-20 & 5/8-11 tripod threading for versatile mounting
-
$232.99
Features:
- Angled, illuminated rotating flip display for easy reading
- Measures in degrees, percent, or feet and inches
- Hold/Copy function with memory to transfer target values
- Audible tone indicator at level or 90°
- Accuracy at 0°/90°: ±0.05°; IP54-rated robust aluminum housing
-
$419.00
Features:
- Up to 770 ft-lbs fastening torque and 1,250 ft-lbs max breakaway
- Three speed/torque settings: 0-800/1,300/1,750 RPM
- Advanced preset and custom modes via PRO360 App; connectivity module included
- Auto Bolt Release helps prevent dropping fasteners in reverse
- BITURBO Brushless motor optimized for CORE18V High Power batteries
- 3/4 in. square drive with friction ring and thru-hole for secure socket fit
- Includes 8Ah CORE18V battery, fast charger, bag, joist hanger
-
$599.00
Features:
- Up to 1,180 ft-lbs fastening and 1,620 ft-lbs max breakaway torque
- BITURBO Brushless motor optimized for CORE18V High Power batteries
- 3 speed/torque settings (0-800 / 1,300 / 1,750 rpm) for control
- Friction ring and thru-hole for quick, secure socket changes
- Auto slow down, auto stop and Auto Bolt Release modes
- Onboard user interface plus LED worklight and removable rubber boot
- Includes two CORE18V 8 Ah batteries, charger, bag and joist hanger
-
$2.99
Features:
- Fast wood drilling performance with clean hole entry
- Fully threaded tip pulls the bit through 2x4s
- Contoured paddle design for faster chip removal
- Spur-and-reamer tips help deliver cleaner holes
- 1/4 in. shank for use with most corded and cordless drills
-
$62.99
Features:
- 12 in. diameter, 80 teeth for extra-fine finish cuts
- Brute Carbide micrograin teeth for durability
- SpeedCoat antifriction finish for faster cutting
- Extra-hard steel blade body for accuracy and reduced deflection
- 1 in. arbor bore; for handheld circular, miter, and table saws
