UPS Ground
Showing 2041–2080 of 2177 resultsSorted by popularity
-
[25 Pack] Diablo DMAPL2050-P25 SDS-Plus 2-Cutter 3/16x4x6 Rebar Demon Hammer Drill Bit
$71.19Features:
- Diablo SDS-Plus 2-Cutter
- Diablo made Dura-Carbide™ withstands impact and high heat applications, dramatically extending life versus standard hammer bits
- Peak Point Tip design for aggressive starts that produce clean, fast holes
- Optimized brazing and hardening process extends life of carbide tips and increases productivity.
- Optimized four-flute design removes dust faster, keeping the carbide tips cooler for ultimate strength and durability
-
Diablo DMAPL2050 SDS-Plus 2-Cutter 3/16x4x6 Rebar Demon Hammer Drill Bit
$4.89Features:
- Diablo SDS-Plus 2-Cutter
- Diablo made Dura-Carbide™ withstands impact and high heat applications, dramatically extending life versus standard hammer bits
- Peak Point Tip design for aggressive starts that produce clean, fast holes
- Optimized brazing and hardening process extends life of carbide tips and increases productivity.
- Optimized four-flute design removes dust faster, keeping the carbide tips cooler for ultimate strength and durability
-
Simpson Strong-Tie SET3G56 | 56-oz. High-Strength Epoxy Adhesive
$121.41Features
- SET3G56 is recognized per ICC ES AC308
- Low-odor formulation.
- For use with potable water.
-
Simpson Strong-Tie SET-XP56 SET-XP | 56-oz. High-Strength Epoxy Adhesive Cartridge
This item has been DISCONTINUED.
- SEE SET3G56 FOR UPDATED MODEL
-
Dewalt DW5440 1/2in x 16in x 18in Rock Carbide SDS Plus Hammer Bit
$15.83Features
- Rock carbide tip for longer bit life
- Elongated four flute helix for faster material removal
- Increased steel prevents breakage
- For use with electric or cordless rotary hammers
-
Dewalt DW22922 7/8 Deep Impact Ready Socket 1/2 inch Drive
$9.99Features
- Thinner than wrench sockets for tough to access areas
- Large laser etched markings – easily identifiable
- A solution for every impact driver user
-
B-61569 1‑1/2″ x 21″ SDS‑MAX Bit, 6‑Cutter
$106.15Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
B-61547 1‑3/8″ x 21″ SDS‑MAX Bit, 6‑Cutter
$92.33Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
B-61531 1‑1/4″ x 36″ SDS‑MAX Bit, 6‑Cutter
$142.89Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 31″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
B-61525 1‑1/4″ x 21″ SDS‑MAX Bit, 6‑Cutter
$74.48Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
B-61503 1‑1/8″ x 36″ SDS‑MAX Bit, 6‑Cutter
$134.20Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 31″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
B-61494 1‑1/8″ x 21″ SDS‑MAX Bit, 6‑Cutter
$70.33Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
B-61488 1‑1/8″ x 13″ SDS‑MAX Bit, 6‑Cutter
$63.96Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
B-61472 1″ x 36″ SDS‑MAX Bit, 6‑Cutter
$120.27Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
-
B-61466 1″ x 21″ SDS‑MAX Bit, 6‑Cutter
$49.20Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
B-61450 1″ x 13″ SDS‑MAX Bit, 6‑Cutter
$45.37Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
B-61438 7/8″ x 21″ SDS‑MAX Bit, 6‑Cutter
$56.42Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-61422 7/8″ x 13″ SDS‑MAX Bit, 6‑Cutter
$41.43Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-61400 3/4″ x 36″ SDS‑MAX Bit, 6‑Cutter
$95.10Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 31″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-61391 3/4″ x 21″ SDS‑MAX Bit, 6‑Cutter
$43.67Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-61385 3/4″ x 13″ SDS‑MAX Bit, 6‑Cutter
$35.81Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-61363 5/8″ x 36″ SDS‑MAX Bit, 6‑Cutter
$90.31Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 31″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-61357 5/8″ x 21″ SDS‑MAX Bit, 6‑Cutter
$43.35Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-61341 5/8″ x 13″ SDS‑MAX Bit, 6‑Cutter
$34.53Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-61313 1/2″ x 21″ SDS‑MAX Bit, 2‑Cutter
$40.91Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-61307 1/2″ x 13″ SDS‑MAX Bit, 2‑Cutter
$30.50Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-61167 3/4″ x 18″ SDS‑PLUS Bit, 3‑Cutter
$35.70Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-61145 5/8″ x 18″ SDS‑PLUS Bit, 3‑Cutter
$28.26Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-60844 1″ x 18″ SDS‑PLUS Bit, 2‑Cutter
$35.47Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-60838 1″x 10″ SDS‑PLUS Bit, 2‑Cutter
$26.46Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-60822 7/8″ x 18″ SDS‑PLUS Bit, 2‑Cutter
$31.45Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-60816 7/8″ x 12″ SDS‑PLUS Bit, 2‑Cutter
$26.46Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 10″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-60713 1/2″ x 12″ SDS‑PLUS Bit, 2‑Cutter
$10.52Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 10″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-60660 3/8″ x 12″ SDS‑PLUS Bit, 2‑Cutter
$8.61Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 10″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
23% OFF
Diablo DMADST0400 4 in. Diamond Segmented Turbo Cut-Off Discs for Masonry
Original price was: $25.99.$19.99Current price is: $19.99.Features
- Diamond segment SPEED-Edge slot design reduces vibration, providing high cutting speeds that deliver up to 30% faster cuts than standard segmented diamond discs
- 60% taller segments containing superior quality diamonds along with an ultra-durable bond to the disc body for up to 4x longer life
- Hardened disc body absorbs vibration and increases impact resistance to deliver superior quality cuts in hardened materials
-
23% OFF
Diablo DMADST0450 4-1/2 in. Diamond Segmented Turbo Cut-Off Discs for Masonry
Original price was: $31.99.$24.79Current price is: $24.79.Features
- Diamond segmented SPEED-Edge slot design reduces vibration, providing high cutting speeds that deliver up to 30% faster cuts than standard segmented diamond discs.
- 60%taller segments containing superior quality diamonds along with an ultra-durable bond to the disc body for up to 4x longer life
- Hardened disc body absorbs vibration and increases impact resistance to deliver superior quality cuts in hardned materials
-
35% OFF
Diablo DMADC0500 5 in. Diamond Continuous Rim Cut-Off Discs for Masonry
Original price was: $39.99.$25.99Current price is: $25.99.Features
- Superior quality diamon edge rim design for up 60% smoother cuts, resulting in chip-free cuts without burn marks
- Hardened disc body absorbs vibration and increases impact resistance to deliver quality cuts in hardened materials
- Ultra -thin constant contact continuous turbo rim design provides precise cuts at high rates of speed
-
23% OFF
Diablo DMACW0400 4 in. Diamond Cup Wheel for Masonry
Original price was: $60.39.$46.69Current price is: $46.69.Features
- L- Shaped diamon Segments for a clean, smooth finish with fast grinding action and long wheel life
- Exra-wide slots deliver efficient dust extraction
- Optimized L -shaped diamonds segments and diamond distribution lead to constant diamond exposure for maximum performance in concrete grinding applications
-
CBFC08100M Diamond Products Basic- No Skid Plate 8? x .100 FIRST-CUT BASIC3000
$97.85Features:
- FIRST-CUT Basic First-Cut Blades
-
CBFC06100M Diamond Products Basic- No Skid Plate 6? x .100 FIRST-CUT BASIC3000
$52.99Features:
- FIRST-CUT Basic First-Cut Blades
