Showing 921–960 of 7304 resultsSorted by popularity
-
13% OFF
$2,427.99 Original price was: $2,427.99.$2,123.99Current price is: $2,123.99.
Features
- DCE210D2 has a compact inline design for efficient one-handed jaw actuation
- Press up to 2″ Copper, Stainless-Steel, and Carbon Steel (Black Iron Pipe) press fittings
- 180° rotaing head to obtain optimal press angle
- Bright LED illumination of entire press location
- Compatible with Tool Connect software
DeWalt DCE214K 1/4″ to 7/8″ Compact NIBCO Press ACR Press Jaw Kit
-
$106.99
Features
- Carbide teeth for long life in material
- Ejection spring for easy plug ejection
- Raised shoulder helps prevent break through
- Optimized tooth design for fast drilling speed
- Optimized pilot bit for long life in metal
-
$73.99
Features
- Optimized Tooth Design For Fast Metal Drilling Speeds
- Ejection Spring For Easy Plug Removal
- Raised Shoulder Helps To Prevent The Drill From Breaking Through The Material When Hole Is Complete
- Thin Walled Design Provides Optimum Metal Drilling Efficiency
-
$10.99
Features
- Tempered, carbon-steel blade with long lasting edge
- Durable construction with lacquered blade to help protect against corrosion
- Thick metal strike cap with flat surface for effective strikes
- Lightweight design with ergonomic handle for comfort and precision
- Limited Lifetime Warranty
-
$11.99
Features
- Tempered, carbon-steel blade with long lasting edge
- Durable construction with lacquered blade to help protect against corrosion
- Thick metal strike cap with flat surface for effective strikes
- Lightweight design with ergonomic handle for comfort and precision
- Limited Lifetime Warranty
-
$14.99
Features
- Tempered, carbon-steel blade with long lasting edge
- Durable construction with lacquered blade to help protect against corrosion
- Thick metal strike cap with flat surface for effective strikes
- Lightweight design with ergonomic handle for comfort and precision
- Limited Lifetime Warranty
-
$13.99
Features
- DWHT16860 features a tempered, carbon-steel blade with long lasting edge
- Durable construction with lacquered blade to help protect against corrosion
- Thick metal strike cap with flat surface for effective strikes
- Lightweight design with ergonomic handle for comfort and precision
- Limited Lifetime Warranty
-
Features
- DISCONTINUED – REPLACED BY DWHT56158
- DWHT56148 features a concentrated strike face for superior impact.
- Improved handle durability with overstrike protection where handles break most.
- Over-mold textured grip helps to improve comfort and control
- Durable head with forged medium-carbon steel construction
- Lightweight fiberglass handle that can withstand tough environments
-
$29.99
Features
- DWHT65103 features black chrome plating
- MAX FITtips engineered to provide better contact with fasteners
- High-durability S2 steel bar
-
$60.99
Features
- 15 Degree offset for knuckle clearance
- Long panel forging for reach and leverage
- Knurled panel rings provide a non-slip gripping surface
- Provides stamped markings for easy wrench size identification
-
9% OFF
$170.99 Original price was: $170.99.$155.99Current price is: $155.99.
Features
- 13 degree offset box end for knuckle clearance
- Increased range of arc swing in tight spaces
- DWMT19234 features DirectTorque Technology
- Full Lifetime Warranty
-
$21.99
Features
- Smooth swing with balanced design for enhanced utility
- 5x More durable grip* for secure, anti-slip handling in a range of worksite settings
- Seamless toe-nailing: Sleek, shield-shaped strike face for finish work
- Built for long life: Durable, one-piece steel construction with thick, heat-treated steel shaft
- Tri-pull technology for versatility: Remove finish nails, framing nails, and staples
-
$30.99
Features
- large milled strike face
- Balanced design with extended claw
- Remove finish nails, framing nails, and staples
- Durable, one-piece steel construction with thick, heat-treated steel shaft
- 5x more durable grip for secure, anti-slip handling in a range of worksite settings
-
$89.99
Features
- DWMT45424 is built for tight spaces – get into tight spaces with a low-profile ratchet design and a 20% thinner head
- tighten and loosen fasteners with ease with sockets featuring direct torque technology
- Professional grade durability – complete tough applications with a chrome vanadium steel construction that provides strength and durability
- Excellent maneuverability – maneuver in restricted areas with a 72-tooth ratchet that offers a 5-degree arc swing
-
$284.99
Features
- The Power of Corded with the Flexibility of cordless
- 4X The Runtime of DCB201 1.5Ah Battery
- 3X The Power of DC9096 18V Battery
- Tri-Platform compatibility with 20V MAX*, 60V MAX* and 120V MAX*
- Durable construction with single piece cell holder
-
$113.99
Features
- DWACPRIR offers 4x Faster Cuts
- Minimize Cutting Effort
- Quick-Change Brace
- Multi-Brand Compatibility
- Full-Range Cut Capacity
-
$363.99
Features
- Reduce noise disturbances with up to 57% quieter operation
- Industry’s highest rated max torque hydraulic impact driver
- Up to 40% faster driving – drive large screws quickly and finish jobs fast.
- The new DCF870E1 provides consistent performance in demanding applications and performs in cold temperatures
- Complete framing, cabinetry, and other applications in tight areas with an ergonomic design
-
$388.99
Features
- Bright Led Control Screen
- lift-load capacity of up to 265 lbs. MAX
- Versatile Performance
- Built-In Pressure Sensor
- Audio Alarm
-
$630.99
Features
- Secondary Foregrip Trigger
- Larger Cut Capacity for More Variety in Applicable Materials
- Powerful Brushless Motor
- Integrated Blade Guard
- Variable Speed Trigger and Dial
-
$96.99
Features
- Includes a large bucket with rollers and grate
- Includes an Ultra Grouting System Floor Sponge
- Cuts grouting time nearly in half
-
-
$899.99
Features
- GFCI protected, offering stable power and parallel capability
- Speed Regulation Switch, Fuel Gauge, Low Oil Indicator, and Automatic Shut-off
- Covered receptacles
- Parallel connection sockets
- EPA & CARB Certified
-
![TW1061T-USA [Roll]](https://www.heydensupply.com/wp-content/uploads/2020/11/TW1061T-1000x1000-1-600x600.jpg "TW1061T-USA [Roll]")
Features:
- Full pallet 48 Cases Tie Wire
- Buy from an authorized Max USA Master Distributor
- Annealed steel wire – diameter 1.0mm
- For use with MAX RB441T, RB443T TwinTier, RB611T, and RB401T-E TwinTier
-
$189.99
Features
- Air-filled motor
- Built in float switch for automatic or manual operation
-
$281.99
Features
- Smooth mowing action for clearing tall grass, cutting weeds and removing overgrowth
- 5″ adjustable wheels provide better maneuverability in a variety of terrain
- 14″ dual action shear blade with 3-sided teeth for clean cuts
- Durable metal under plate for enhanced abrasion resistance
- Quickly attaches to power head for easy operation
-
$69.99
Features
- International Code Council, Evaluation Service (ICC-ES), ESR-3275
- Code compliant with the 2018 IBC/IRC, 2015 IBC/IRC, 2012 IBC/IRC, and 2009 IBC/IRC
- Tested in accordance with ASTM E1190 and ICC-ES AC70 for use in concrete, CMU block and steel
- Manufactured by DEWALT
-
$33.75
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
$42.35
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
$24.49
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
$14.99
Features
- DFM12726 is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
$373.69
Features
- 3GWS506P features an integral Cap
- Flanges
- Open-Mesh Collar
- Color-Coded, Formula-Specific Mesh
3GWS506P Tech Sheet
-
![[Pack of 12] Simpson Strong-Tie SET3G10 8.5-oz. High-Strength Epoxy Adhesive w/ 1 Nozzle and Extension product image](https://www.heydensupply.com/wp-content/uploads/2024/01/Simpson-Strong-Tie-SET3G10-8.5-oz-600x600.jpg)
-
$31.99
Features
- Wire mesh visor.\
- NRR 22db.
- Fits most hard hats.
-
$9.29
Features
- Shields the face and neck from the heat of the sun
- Collapses to easily store in a self-contained attached pouch
- High visibility for additional protection
- Fits most full and half brim hard hats
-
$11.79
Features
- Meets ANSI Z89.1 Type 1 Class G & E Standards
- 6 Point Ratchet Suspension
- Pillowed Brow Pad
- Nylon Crown Strap Suspensions
- Vertical Height Adjustment
-
$11.69
Features
- Packaged in Clamshell
- High quality hearing protection
- Rugged, durable design
- Dielectric construction
- Can be combined with earplugs for the ultimate in hearing protection
-
$6.79
Features
- Comfortable, tapered shape
-
Features
- High performance earmuff offers excellent noise reduction rating of 29 with maximum comfort
- Adjustable moisture wicking headband moves moisture away while providing cool comfort
- Lightweight design provides all day comfort
- Compact folding feature allows for easy storage and keeps dust and debris out of the earcups
- Cushion padding on earcups provides maximum protection from noise and maximum comfort
-
$698.99
Features
- Makita-built brushless motor provides power equivalent to a 30cc gas string trimmer
- Automatic Torque Drive Technology mode automatically shifts from 4,000-6,000 RPM for extended run time or added power
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- No gas, emissions, oil mixing or pull starts
- High performance with low noise levels
-
$158.99
Features
- Compact size ideal for precision trimming and edging
- 2-tools-in-1: 180º rotating head allows the trimmer to convert to edger
- Telescoping shaft (48-1/4” to 56-1/2”) for optimum cutting position
- Adjustable 5-position pivoting head for cutting angle adjustment when trimming in tight spaces
- Makita-built motor delivers 7,800 RPM for faster cutting
