65SSD Marshalltown Corner Trowel
$20.41CORNER TROWEL
Showing 6881–6920 of 7304 resultsSorted by popularity
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Simpson Strong-Tie WSV134S Strong-Drive WSV SUBFLOOR Screw Collated 9 x 1-3/4 in. T-25 Yellow-Zinc 2000-Qty
$132.72Features:
- WSV134S features a redesigned tip and thread pattern to provide easy starts and up to 25% less torque
- Less installation torque also means less wear on tools
- Deep 6-lobed recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs
-
Simpson Strong-Tie BC46Z BC ZMAX Galvanized Post Cap for 4×6
$13.95Features:
- BC46Z provides a positive connection from a post to a wood deck
- Stronger than angled nailing or screw fastening
- Reduces the chance of the post splitting and eliminates nailing into end grain
- Not recommended for non top-supported installations (such as fences or unbraced carports)
- Nominal post size: 4×6
-
Simpson Strong-Tie HRS12 HRS 12 in. 12-Gauge Galvanized Heavy Strap Tie
$4.20Features:
- A versatile, heavy-duty strap for a variety of connections and splices where extra strength is needed
- Straight lines and chamfered edges offer a better appearance
- HRS12 provides support in home repair and construction projects
- Easy nailing pattern for connecting the sides of 2x members
- Width: 1-3/8 in.
-
Simpson Strong-Tie MASB 16-Gauge Galvanized Masonry Mudsill Anchor
$2.39Features:
- Anchors mudsill to concrete block, poured walls or slab foundations
- Fill CMU cell with concrete grout first, then place MASB into the grouted cell and adjust into position
- Attach mudsill to anchor only after the concrete grout cures
- Nominal sill size: 2×4, 2×6
- Made from 16-gauge steel
-
Simpson Strong-Tie HTT5 11-Gauge Galvanized Heavy Tension Tie, 16 in.
$32.01Features:
- HTT5 is ideal for retrofit or new construction projects
- Can be installed with cast-in-place or post-installed anchor bolts
- Four-ply formed steel provides increased tension capacity
- Anchor bolt washers not required
- 2-1/2 in. width x 16 in. length
-
Simpson Strong-Tie PDPAWL-250 .157 in. x 2-1/2 in. Powder-Actuated Pin w/ 1 in. Washer
$17.17Features:
- The minimum effective shank length must equal or exceed the sum of the thickness of the attached material and the minimum embedment depth
- PDPAWL is code listed per ICC-ES ESR-2138, Florida FL15730 and LA RR25469
- Compatible with Simpson Strong-Tie powder-actuated tool systems as well as other common tools
- .300-in. head diameter / .157-in. shank diameter
- 1-in. washer
-
Simpson Strong-Tie WSV212S Strong-Drive WSV SUBFLOOR Screw Collated 9 x 2-1/2 in. T25 Yellow-Zinc 1500-Qty
$189.99Features:
- Redesigned tip and thread pattern provides easy starts and up to 25% less torque while driving makes for up to 20% faster driving
- Less installation torque also means less wear on tools
- Deep 6-lobed recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs
- The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks
- WSV screws can be easily backed out, allowing for future access to floor cavities
-
Simpson Strong-Tie LSTA18 1-1/4 in. x 18 in. 20-Gauge Galvanized Strap Tie
$1.35Features:
- LSTA18 is load-rated, precut strap designed for quick installation and optimal performance
- Designed to resist wind and seismic forces
- Floor-to-floor clear span application
- Width: 1-1/4 in.
- Length: 18 in.
-
Simpson Strong-Tie HDQ8-SDS3 HDQ 14-in. Galvanized Holdown w/ Strong-Drive SDS Screws
$77.26Features:
- SDS screws are supplied with the holdowns to ensure proper fasteners are used
- No stud bolts to countersink at openings
- HDQ8-SDS3 Height: 14 in.
- Made from 7-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
Simpson Strong-Tie H1Z H1 18-Gauge ZMAX Galvanized Hurricane Tie
Features:
- H1Z holds the rafter or truss on both sides for high lateral load resistance
- Used for a variety of connections where one member crosses another
- Can be installed on inside or outside of wall, or both sides
- Can be installed with flanges facing either inward or outward
- Made from 18-gauge steel
