HR4013C 1‑9/16″ SDS‑MAX AVT Rotary Hammer
$885.99Features:
- Air Actuated Counterbalance System
- Vibration Absorbing Housing
- Powerful 11 Amp Motor Delivers 8.4ft/lbs of impact energy
- Variable Speed Dial
- Soft Start and Soft No Load functions
Showing 521–560 of 7304 resultsSorted by popularity
-
-
HM1812X3 70 lb. Advanced AVT Breaker Hammer, accepts 1‑1/8″ Hex bits
$2,439.00Features
- 15 AMP breaker hammer motor which delivers 53.9 ft.lbs./72.8 joules of impact energy
- Advanced AVT® Vibration Reduction Technology
- L.E.D. service light notifies the user approximately 8 hours before brushes need to be replaced
-
Diablo DS0620CF 6″ Carbide Reciprocating Blades for Thin Metal Cutting
$9.64Features:
- High performance carbide for greater durability and cutting performance in thin metal
- Solid carbide creates full barrier to heat resistance for maximum durability
- Carbide strip teeth are milled to perfection for smoother quality cuts
-
2′ x 4′ Lumber 16ft
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- 16′
- 208 pieces per bundle
-
2′ x 6′ Lumber 16ft
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- 16′
- 128 pieces per bundle
-
Multi-Color 500lb rated OSHA Compliant Pennant Flags for Safety and Hazard Marking Electro Tape 87693
$15.99Features
- The all new Electro Tape 87693 features Fade Resistant Technology
- Meets 500lb minimum tensile strength required by OSHA for perimeter marking.
- Highly effective at drawing attention for safety, traffic or an event.
- Construction: Polypropylene Film Flags and sag resistant poly rope
-
DeWalt DW5447 5/8 in. x 10 in. x 12 in. Rock Carbide Drill Bit
$19.99Features
- Rock carbide tip for longer bit life
- Elongated four flute helix for faster material removal
- Increased steel prevents breakage
- For use with electric or cordless rotary hammers
-
BC3697 Marshalltown Brick & Block Cart
$594.99Features
- Ships LTL
- Comes with rugged 13” pneumatic tires
- Different prong positions
- Easiest way to move up to 800 lbs. of brick and block around your worksite
-
6% OFF
DeWalt DWAPXPIR Impact Connect PEX Pinch Clamp Attachment
Original price was: $146.99.$138.17Current price is: $138.17.Features
- Promote productivity with this attachment that delivers 6X faster clamps without the hassle of a hand tool
- Limit fatigue with this PEX pincher that requires less work to finish the job
- Attach in seconds to go from driving screws to clamping pipe
- Works with select DEWALT 20V MAX* and other pro-grade 18V impact drivers
-
-
![TW1061T-PC-[Roll]](https://www.heydensupply.com/wp-content/uploads/2021/01/max-tw1061t-pc-poly-coated-tie-wire-1.jpg)
TW1061T-PC single roll MAX Poly Coated 19Ga Steel Rebar Tie Wire
$22.99Features:
- Poly Coated Wire Resists Rust and Corrosion
- Use with epoxy coated rebar
- 19 Guage Rebar Tie Wire
- For use with MAX TwinTier Rebar Tying Tools
-
Multiquip ST2047 Compact Submersible Centrifugal Pump
$559.99Features
- 1.0HP, 115V/9.8A, 1Ø, UL & CUL Listed Electric Motor.
- Built-in Overload Protection.
- 2” (NPT) Female Discharge Port.
- Reliable double mechanical oil-filled seals.
- Cast iron/steel motor casing serves as heat conductor.
- Check out the pump(s) guide here
-
[Pack of 100] Dewalt DFM12724 DEWALT Ultracon+ Hwh 1/4 X 2-1/4
$12.99Features
- DFM12724 is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
Radians RB2100 Rad-Band 2 Banded Earplugs – Orange Band / Orange Pods
Features
- Soft, ergonomic pods
- Lightweight, curved band
- High density construction is lightweight and very durable
- Includes 1 pair replacement pods
- Made in the USA
-
Simpson Strong-Tie APB44DSP Decorative Post Base Side Plate
$18.49Features
- APB44DSP offers enhanced aesthetic appeal
- Superior corrosion protection
- Versatile application
- Easy installation
-
West Chester HVG700SLC Hi-Vis Seamless Knit Polyester Glove with Latex Coated Crinkle Grip on Palm & Fingers [1 dozen]
$23.69Features
- HVG700SLC offers a seamless knit polyester liner
- Latex Crinkle Coating
- Durable & Tough
- Hi-Vis Color
- Knit Wrist Cuff
Select Options This product has multiple variants. The options may be chosen on the product page -
![West Chester 750RKW
Regular Weight Polyester/Cotton Jersey Glove with Fleece Lining - Red Knit
Wrist [1 dozen] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/750RKW-UP-600x600.jpg)
West Chester 750RKW Regular Weight Polyester/Cotton Jersey Glove with Fleece Lining – Red Knit Wrist [1 dozen]
$17.39Features:
- Polyester/Cotton construction is breatheable and decreases hand fatigue
- Straight thumb increases comfort in closed-fisted work
- Fleece lining is excellent for cold applications
- Jersey lining is soft, warm, flexible, and stretchy
- Brown color hides the dirt and extends the wear
- Knit wrist provides a secure fit and helps prevent dirt and debris from entering the glove
Select Options This product has multiple variants. The options may be chosen on the product page -
![ATG 56-3175 Nitrile
Dipped Glove with Interlock Liner and Textured Finish on Palm, Fingers &
Knuckles - Safety Cuff [1 dozen] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/56-3175-UP-600x600.jpg)
ATG 56-3175 Nitrile Dipped Glove with Interlock Liner and Textured Finish on Palm, Fingers & Knuckles – Safety Cuff [1 dozen]
$42.79Features:
- Armor? Series gloves feature a unique combination of low-coating deposit weight and high abrasion resistance and provide the wear of heavier, bulkier nitrile coated gloves without sacrificing flexibility and tactile sensitivity
- ActiFresh? treated to reduce germs and odors
- Thinly coated with blue nitrile on cotton interlock liner
- Comfortable and flexible, provides excellent dexterity
- Textured coating provides a great grip
- Effective, affordable protection from physical hazards such as cut, puncture, snags and abrasion
- Resistant to grease and oils
- Safety cuff helps protect wrist and allows for fast removal
- Launderable
- Made in ISO 9001:2000 / ISO 14001:2000 facilities
Select Options This product has multiple variants. The options may be chosen on the product page -
![G-Tek 41-1417 Seamless
Knit PolyKor Blend Glove with Acrylic Liner and Double-Dipped Nitrile Foam
Grip on Full Hand ANSI A4 Cut Resistance [1 dozen] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/41-1417-UP-600x600.jpg)
G-Tek 41-1417 Seamless Knit PolyKor Blend Glove with Acrylic Liner and Double-Dipped Nitrile Foam Grip on Full Hand ANSI A4 Cut Resistance [1 dozen]
$94.19Features:
- Seamless construction for a comfortable fit
- PolyKor? blended shell is lightweight and provides excellent dexterity, tactile sensitivity and cut resistance
- Acrylic lined gloves provide economical cold weather protection
- Nitrile foam coating provides superior grip in dry, wet and oily applications
- Fully coated flat nitrile helps keep hands dry in wet applications
- Knit wrist helps prevent dirt and debris from entering the glove
- Excellent thermal insulation
- Quickly evaporates moisture from the skin
- Extra softness for non-chafing comfort
- Launderable for extended life and to reduce replacement costs
- Color coded hems for easy size identification
Select Options This product has multiple variants. The options may be chosen on the product page -
![PIP 41-005 Seamless Knit Polypropylene Glove - 13 Gauge [1 dozen] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/41-005-UP-PIM-600x600.jpg)
PIP 41-005 Seamless Knit Polypropylene Glove – 13 Gauge [1 dozen]
Can be used as a glove or liner in cold weather applications.
Select Options This product has multiple variants. The options may be chosen on the product page -
![ATG 34-274 Ultra Light
Weight Seamless Knit Nylon Glove with Nitrile Coated MicroFoam Grip on Palm
& Fingers [1 dozen] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/34-274-UP-600x600.jpg)
ATG 34-274 Ultra Light Weight Seamless Knit Nylon Glove with Nitrile Coated MicroFoam Grip on Palm & Fingers [1 dozen]
$50.59Features:
- Nitrile MicroFoam coatings are compatible with light oils and provide good grip and excellent abrasion resistance
- Knit Wrist helps prevent dirt and debris from entering the glove
- Even More Efficient Breathability – The heat from your hand travels quicker through the breathable surface due to it being 35% thinner than any other traditional foam gloves enabling it to breathe 40% more efficiently than similar gloves
- 360? Breathability – Patented micro-foam nitrile coating offers 360? breathability, making it the most breathable glove on the market today
- 30% Thinner – Than traditional foam nitrile gloves on the market whilst offering similar mechanical performance to traditional foam nitrile gloves
- Ultra Light Weight Liner – The use of an ultra light liner utilized to produce smooth and rounded fingertips, maximizing fingertip sensitivity
- Form, Fit and Feel – Mimics the “hand at rest”, reducing hand fatigue and increasing comfort
- Touchscreen compatible to allow the user to operate a touch screen phone or device without removing gloves
- Consistent Penetration Free Liner – From the nitrile, leaving only the soft liner resting against the skin.
- Optimized Grip – The micro-cup finish allows for a controlled grip
- All ingredients used in the manufacturing and construction of this product are compliant with the REACH legislation
- This glove has been laundered prior to final packaging making it clean and safe for use
- The Oeko-Tex? Association has evaluated and certified this product as skin safe from the second it comes into contact with the skin
- The Skin Health Alliance has awarded professional dermatological accreditation following review of the scientific dossier behind this product
- Complies with FDA food handling requirements 21 CFR, Part 177
- Silicone free
Select Options This product has multiple variants. The options may be chosen on the product page -
![G-Tek 33-G125 Seamless
Knit Nylon Blend Glove with Polyurethane Coated Flat Grip on Palm &
Fingers [1 dozen] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/33-G125-UP-600x600.jpg)
G-Tek 33-G125 Seamless Knit Nylon Blend Glove with Polyurethane Coated Flat Grip on Palm & Fingers [1 dozen]
$14.09Features:
- Seamless knit nylon shell offers increased comfort, finger dexterity and breathability
- Polyurethane coatings take on the surface properties of the glove liner providing a tactile grip in dry and slightly oily conditions, ideal for applications that require dexterity for precise handling
- Knit Wrist helps prevent dirt and debris from entering the glove
- Breathable back for comfort
- Pair packed for ease of distribution
- Silicone free
- This style is also available tri-folded and shrink-wrapped for carefree dispensing through vending machines (33-G125V)
Select Options This product has multiple variants. The options may be chosen on the product page -
![G-Tek 16-645LG Seamless
Knit PolyKor Blended Glove with Polyurethane Coated Flat Grip on Palm &
Fingers ANSI A5 Cut Resistance [1 dozen] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/16-645LG-UP-600x600.jpg)
G-Tek 16-645LG Seamless Knit PolyKor Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers ANSI A5 Cut Resistance [1 dozen]
$69.99Features:
- Seamless construction offers increased comfort and breathability
- PolyKor? blended shell is lightweight and provides excellent dexterity, tactile sensitivity, and cut resistance
- Polyurethane coatings take on the surface properties of the glove liner providing a tactile grip in dry and slightly oily conditions, ideal for applications that require dexterity for precise handling
- Knit Wrist helps prevent dirt and debris from entering the glove
- Hi-Vis coloring makes this product very easy to see
- Color coded hems for easy size identification
- 100% Silicone Free
- Washable, resistant to chemicals, water, and ultraviolet light
Select Options This product has multiple variants. The options may be chosen on the product page -
B-80014 50′ High Pressure Hose with Fittings
$223.99Features
- Up to 2X less weight than heavier hoses
- Highly flexible and less kinks for easy rolling
- More durable than vinyl hoses
- Includes fittings
- For high pressure compressors and nailers
-
[10 Pack] Simpson Strong-Tie THDB62600WH Titen HD 5/8 in. x 6 in. Washer-Head Heavy-Duty Screw Anchor
$49.43Features
- THDB62600WH is tested in accordance with ACI 355.2 and AC193
- Qualified for static, wind and seismic loading conditions
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- Washer head allows screw anchor applications incompatible with a hex head
-
[10 Pack] Simpson Strong-Tie THDB62800HMG Titen HD 5/8 in. x 8 in. Mechanically Galvanized Heavy-Duty Screw Anchor
$118.46Features
- THDB62800HMG is tested in accordance with ACI 355.2, AC193 and AC106
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Simpson Strong-Tie THD50600HMGF1 Titen HD 1/2 in. x 6 in. Mechanically Galvanized Heavy-Duty Screw Anchor
$4.95Features
- THD50600HMGF1 is tested in accordance with ACI 355.2, AC193 and AC106
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
[50 Pack] Simpson Strong-Tie THD37400H4SS Titen HD 3/8 in. x 4 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor
$244.62Features
- THD37400H4SS is ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
4% OFF
Simpson Strong-Tie WBSK Workbench and Shelving Hardware Kit
Original price was: $28.99.$27.83Current price is: $27.83.Features
- Durable connections
- Quick assembly
- Professional-quality design
- No angle cut or bolts needed when constructing WBSK
-
Dewalt DCH263R2 20V MAX* XR® Brushless 1-1/8 in. SDS Plus D-Handle Rotary Hammer Kit
$617.99Features
- 3.0 joules of impact energy provides corded power without the cord.
- Optimized ergonomic design provides excellent control in all orientations
- Durable three mode German engineered mechanism
- Wide optimal drilling range between 1/4 in. and 3/4 in.
- Factory-set clutch reduces sudden, high-torque reactions if bit jams.
- Optimized ergonomic design provides an exceptional drilling and chipping experience in overhead, horizontal and downward orientations.
- Constant speed under load for fast speed of application
-
GG311 Kraft Aluminum Tie Wire Reel
$47.60Features:
- Made of strong lightweight aluminum
- Will not chip, crack or break, easy turn handle, fits any standard belt
- Made in the USA
-
MST16 Marshalltown Modular Spacing Tape Measure – 16ft
$11.87MODULAR SPACING TAPE MEASURE-16ft
Minimum order quantity: 5Order in multiples of: 5 -
ML339 Marshalltown Braided Nylon Masons Line 500ft Fl. Yellow Size 18 6in Core
$17.96MASONftS LINE, BRD, 500ft, FL YELLOW
-
-
-
-
![KB459 Marshalltown Stainless Steel Knee Boards - 1 Pair [No Pads Included] product image](https://www.heydensupply.com/wp-content/uploads/2021/11/5f4d6546774f600e101ca919-600x243.jpg "5f4d6546774f600e101ca919.jpg")
KB459 Marshalltown Stainless Steel Knee Boards – 1 Pair [No Pads Included]
$178.80Features
- Provides extra comfort and durability on the jobsite
KNEE BOARD (1 Pair) SS NO PADS
-
-
-
7304 Marshalltown Bronze Hand Groover
$61.91Features
- high-quality bronze blade material
BRONZE HAND GROOVER
