Showing all 25 resultsSorted by popularity
-
![[10 Pack] Simpson Strong-Tie THDB62100WH Titen HD 5/8 in. x 10 in. Washer-Head Heavy-Duty Screw Anchor product image](https://www.heydensupply.com/wp-content/uploads/2023/01/10-Pack-Simpson-Strong-Tie-THDB62100WH-Titen-HD-58-in.-x-10-in.-Washer-Head-Heavy-Duty-Screw-Anchor-8-600x600.jpg "[10-Pack]-Simpson-Strong-Tie-THDB62100WH-Titen-HD-58-in.-x-10-in.-Washer-Head-Heavy-Duty-Screw-Anchor-(8)")
$87.26
Features
- THDB62100WH is tested in accordance with ACI 355.2 and AC193
- For added convenience, a 1/2″ socket adapter and (2) T-drive bits are included in each box
- Washer head allows screw anchor applications incompatible with a hex head
-
$36.99
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$22.00
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$38.98
Features:
- Four-cutter carbide-tipped head for hitting rebar and reducing bit lock-up
- Delivers up to 2X life in concrete with rebar vs. 2-cutter bits
- Four-flute design efficiently removes dust from the hole
- SDS-plus shank for use with SDS-plus rotary hammers
-
New Product
Features:
- Converts EZ-Cube bottom shelf into a locking storage compartment
- 12-gauge steel construction for strength
- Brite White ARMOR TUF Powder Coat finish for durability
- Designed for EZ-Cube van shelving; 11 in x 50 in size
- Locking paddle handle latch for secure storage
-
New Product
Features:
- Turns EZ-Cube bottom shelf into a locking cabinet
- 12-gauge steel construction for strength
- Brite White ARMOR TUF Powder Coat finish
- Measures 10 in high x 42 in wide
- Locking paddle handle latch for security
-
$233.80
Features:
- 5,000 lb capacity overhead anchorage connector
- Designed to drop through 1.75 in to 3 in openings
- 1/4 in thick steel plate with 8.5 ft cable and swivel ring
- Use on concrete floors, steel girders, and grates
- Meets ANSI Z359.18 and OSHA requirements
-
$233.80
Features:
- Designed to drop through 1.75?3 in overhead openings for secure anchorage
- 6 in square steel plate with 6 ft cable and swivel D-ring
- 5,000 lb minimum breaking strength
- Usable on concrete floors, steel girders, and grates
- Meets ANSI Z359.18 and OSHA requirements
-
$233.80
Features:
- Drop-through overhead anchorage connector for 1.75?3 in openings
- 6 in steel plate with 2 ft cable and swivel ring
- 5,000 lb Minimum Breaking Strength (MBS)
- Attaches to concrete floors, steel girders, and grates
- Meets OSHA and ANSI Z359.18 standards
-
$233.80
Features:
- 5,000 lb capacity overhead anchorage connector
- Designed to drop through 1.75?3 in openings
- 1/4 in thick steel plate with 1 ft cable and swivel ring
- Attaches to concrete floors, steel girders, and grates
- Meets ANSI Z359.18 and OSHA standards
-
$151.80
Features:
- 5,000 lb capacity overhead anchorage connector
- Designed to drop through 1.75?2 in openings
- 1/4 in thick steel plate with 8.5 ft cable and swivel ring
- Use on concrete floors, steel girders, and grates
- Meets ANSI Z359.18 and OSHA standards
-
$151.80
Features:
- Drop-through overhead anchorage connector
- 4-inch square steel plate with 6-foot cable
- Swivel D-ring connection
- Minimum Breaking Strength of 5,000 lb
- Suitable for concrete floors, steel girders, and grates
-
$151.80
Features:
- Drop-through anchorage fits 1.75?2 in openings
- 4 in steel plate with 2 ft cable and swivel ring
- 5,000 lb minimum breaking strength
- Attaches to concrete floors, steel girders, and grates
- Meets OSHA and ANSI Z359.18 standards
-
$38.99
Features:
- Wide 2-1/2 in. cutting edge for efficient material removal
- 10 in. overall length for reach in demolition tasks
- SDS-plus shank for secure fit in rotary and demolition hammers
- Faster chipping design with additional wedges to increase breakout
- Proprietary heat-treat process for durability
-
$12.79
Features:
- 3/4 in. cutting edge with 10 in. overall length
- SDS-plus shank for rotary hammers and demolition hammers
- Proprietary heat-treated steel for durability
- Sharp flat edge helps reduce jamming and improves material removal
- Ideal for concrete and masonry demolition
-
$49.49
Features:
- Drives 5/8 in. and 3/4 in. ground rods for lightning conductors or tent anchors
- SDS-max shank for rotary hammer drills
- One-piece design for durability
- Proprietary heat-treated steel
- Intended for use in soil and ground
-
$12.69
Features:
- SDS-plus Bulldog hammer steel for rotary hammer drills
- Proprietary heat-treated steel for durability
- Designed for concrete and masonry demolition
- Ideal for tuckpointing and material removal
-
$94.62
Features
- THD75100HMG is tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Reuse of the anchor will not achieve listed loads and is not recommended
-
![[10 Pack] Simpson Strong-Tie THDB62100H Titen HD 5/8 in. x 10 in. Heavy-Duty Screw Anchor product image](https://www.heydensupply.com/wp-content/uploads/2023/01/10-Pack-Simpson-Strong-Tie-THDB62100H-Titen-HD-58-in.-x-10-in.-Heavy-Duty-Screw-Anchor-8-600x600.jpg "[10-Pack]-Simpson-Strong-Tie-THDB62100H-Titen-HD-58-in.-x-10-in.-Heavy-Duty-Screw-Anchor-(8)")
$79.38
Features
- High-Strength Performance
- Seismic & Wind Approved
- Heat-Treated Durability
- THDB62100H eliminates the need for a separate washer, unless directed otherwise by code
-
![[5 Pack] Simpson Strong-Tie THD75100H Titen HD 3/4 in. x 10 in. Heavy-Duty Screw Anchor product image](https://www.heydensupply.com/wp-content/uploads/2022/12/5-Pack-Simpson-Strong-Tie-THD75100H-Titen-HD-34-in.-x-10-in.-Heavy-Duty-Screw-Anchor-8-600x600.jpg "[5-Pack]-Simpson-Strong-Tie-THD75100H-Titen-HD-34-in.-x-10-in.-Heavy-Duty-Screw-Anchor-(8)")
$68.15
Features
- THD75100H is tested in accordance with ACI 355.2, AC193 and AC106
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
$26.46
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$9.51
Features:
- One-piece, wrap-around clip ensures uniform holding capacity
- Threaded end is chamfered for ease of starting nut
- Diameter: 5/8 in.
- Length: 10 in.
- Made from mechanically galvanized carbon steel
-
$22.49
Features:
- Extreme durability and longer life in concrete
- Ideal for general demolition work, thin-set removal, cleaning concrete, and removing scale and rust
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Bracing ribs deliver superior stability and rigidity
- Self-Sharpening for increased productivity and longer life
- Maximum performance in cordless and corded SDS-Plus and SDS-Max rotary hammers
-
$15.59
Features:
- Extreme durability and longer life in concrete
- Ideal for general demolition work, adjustment work, restoring joints and clearing reinforcements
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Unique Dual-Tooth jam-free design creates multi-directional fractures for faster rate of material removal
- Self-Sharpening for increased productivity and longer life
- Maximum performance in cordless and corded SDS-Plus and SDS-Max rotary hammers
-
$12.69
Features:
- Extreme durability and longer life in general demolition and clearing reinforcements
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Twist Point design resists jamming for faster chipping and material evacuation
- Self-Sharpening for increased productivity and longer life
- Maximum performance in cordless and corded SDS-Plus and SDS-Max rotary hammers
