Showing 161–189 of 189 results
-
Free Shipping
$295.00
Features
- The Makita XWT18Z BL™ Brushless Motor delivers 520 ft.lbs. of Fastening Torque and 740 ft.lbs. of Nut-Busting Torque
- Compact and ergonomic design at only 6-11/16″ long
- 4-speed power selection switch (0-500 / 0-1,200 / 0-1,900 / 0-2,200 RPM & 0-1,000 / 0-1,700 / 0-2,400 / 0-2,700 IPM) for precise fastening control in a wide range of applications
- 3 forward and 3 reverse Auto-Stop modes for increased efficiency
- Full speed mode function reduces trigger pull to reach full speed
-
Free Shipping
$371.25
Features
- BL™ Brushless Motor delivers 780 ft.lbs. of Fastening Torque and 1,250 ft.lbs. of Nut-Busting Torque
- 3-speed power selection switch (0-900/ 0-1,000/ 0-1,800 RPM & 0-1,800/ 0-2,000/ 0-2,200 IPM) provides precise fastening control for a wide range of applications
- 3/4″ anvil with friction ring and thru hole retention system for maximum productivity
- Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
-
Free Shipping
$761.25
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power performance required for heavy-load application
- Auto-start Wireless System (AWS®) utilizes Bluetooth® technology for wireless power-on/off communication between tool and dust extractor (AWS® Transmitter sold separately)
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
- Anti-Vibration Technology (AVT®) is an internal counterbalance system along with vibration-absorbing handles that work together to reduce vibration
- Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of bit is suddenly forced to stop
-
Free Shipping
$1,736.25
Features
- Quickly locates objects in multiple types of base materials to allow for immediate cutting, drilling, or coring for through penetrations
- Capable of detecting a variety embedded objects such as; metals (steel, aluminum, copper), wood, plastic and shielded electrical wire up to 7″ deep
- Selectable base material modes allow for increased versatility in dry concrete, wet concrete, wall partitions (wood or drywall) and hollow block
- Simplified user interface displays center, edge position, relative width and depth of embedded objects
- Multi-detection mode allows for scanning in up to three parallel surface positions; ideal for detecting objects running diagonally or detection affirmation
-
Free Shipping
$261.25
Features
- Makita-built brushless motor delivers up to 565 CFM and 143 MPH
- Move heavy debris with turbo boost mode
- XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
- Up to 44% more blowing force than a 24.5cc gas blower
- Turbo boost mode delivers 565 CFM for heavy debris
-
Free Shipping
$425.00
Features
- Makita-built motor delivers 13,000 VPM to help increase strength of concrete
- Dual-directional switch to conveniently hold the tool in either horizontal or vertical positions
- Up to 25 minute run time under load
- Compact and ergonomic design at only 58-1/2″ long
- Weighs only 7.7 lbs. with battery (battery not included) for reduced operator fatigue
-
Free Shipping
$211.25
Features
- X-LOCK quick change system allows for tool-free wheel changes with simple snap-on mounting and pull release lever for change-out
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life; delivers 8,500 RPM
- Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the wheel is suddenly forced to stop
- Electric Brake stops the grinding or cut-off wheel in 2 seconds or less for maximum productivity
- Automatic Speed Change™ technology adjusts speed and torque during operation for optimum performance
-
Free Shipping
$2,323.75
Features
- Performs up to 233 cuts of #5 rebar with one 18V LXT® 5.0Ah Battery
- Cutting capacity range of 1/8″- 5/8″
- Spark free cutting of rebar and steel rod
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- Fast and effortless cutting speed of #5 rebar in 2.8 seconds
-
Free Shipping
$2,498.75
Features
- Up to 125 cuts of #6 (3/4″) rebar on a single charge using 5.0Ah LXT® Battery
- Cutting capacity range of 1/8″- 3/4″; cuts up to 60 grade #6 rebar
- 4-way rotatable cutting blade makes up to 4,000 cuts of #3 (3/8″) rebar before needing to be replaced
- Cutting head rotates 360° for different cutting positions
- Adjustable stopper holds the rebar at 90° to the cutting blade and assists in smooth cutting
-
Free Shipping
$265.00
Features
- Sound pressure rating of 61 dB(A); measured per ANSI B 175.2 standard
- Makita-built motor produces a maximum air velocity of 120 MPH
- 6-stage air velocity/volume selection dial with variable speed control trigger
- Delivers up to 28 minutes of run time at 15,800 RPM using two 18V LXT® 5.0Ah batteries (batteries not included)
- Zero emissions and reduced maintenance; no need for gas or oil
-
Free Shipping
$287.50
Features
- Makita-built motor delivers 1,100 lbs. of dispensing force to dispense the highest viscosity adhesives and sealants
- 5 speed dial optimizes flow rate from 0-66 IPM
- Variable speed trigger allows user to match speed to the application
- 360° rotatable cartridge holder fits 10 oz. and 300 ml cartridges
- Drip-reduction feature automatically relieves pressure on the material when trigger is released to prevent unintentional dispensing
-
Free Shipping
$331.25
Features
- Makita-built motor delivers 1,100 lbs. of dispensing force to dispense the highest viscosity adhesives and sealants
- 5-speed dial optimizes flow rate from 0-66 IPM
- Variable speed trigger allows user to match speed to the application
- 360° rotatable cartridge holder fits 20 oz. cartridges, sausage packs and bulk caulk and adhesives
- Includes 3 pistons for use with cartridges, sausage packs and bulk materials
-
Free Shipping
$287.50
Features
- Makita-built motor delivers 1,100 lbs. of dispensing force to dispense the highest viscosity adhesives and sealants
- 5 setting speed dial optimizes flow rate from 0-66 IPM
- Variable speed trigger allows user to match the speed to the application
- 360° rotatable cartridge holder fits 28-29 oz. cartridges
- Drip-reduction feature automatically relieves pressure on the material when trigger is released to prevent unintentional dispensing
-
Free Shipping
$350.00
Features
- Drives a range of 18 gauge brad nails from 5/8″ to 2″; magazine capacity up to 100 nails
- Drives up to 1,660 finish nails using a 5.0Ah 18V LXT® Battery (battery not included)*
- 2-mode selector switch for control of nailing operation
- “Tool-less” depth adjustment for precise flush and countersink finish
- Anti-dry fire mechanism engineered to prevent driving blanks and damage to work surface
-
Standard Shipping
$206.25
Features
- Brushless motor delivers 0-2,500 RPM with increased torque to handle high demand fastening applications
- Push Drive™ Technology – in lock-on mode the motor starts only when the fastener is engaged for a quieter work environment and to save battery power
- Depth adjustable nose piece delivers consistent screw fastening performance
- The BL Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
-
Free Shipping
$208.75
Features
- Quick-Shift Mode™ uses the brushless motor’s electronic controls to find the best balance of speed and torque for each application for more efficient fastening
- Brushless motor delivers 3,600 Max RPM and 1,600 in.lbs. of Max Torque
- 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,600 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-3,800 IPM) provides precise fastening control for a wide range of applications
- Additional one-touch 4-speed power selector button under the chuck for added convenience
- Assist Mode (A-mode) feature helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins
-
Standard Shipping
$638.75
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power performance required for heavy-load application
- Constant speed control automatically applies additional power under load for optimum performance
- Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears during a bind-up situation
- XGT® technology delivers up to 135 of 3/8″ holes per charge using full charged 40V XGT® 4.0Ah battery*
- Quick change chuck allows for interchangeability from SDS-PLUS to 1/2″ keyless chuck for utilization of straight shank bits
-
Free Shipping
$747.50
Features
- X2 LXT® technology delivers up to 140 1/2″ x 2-3/8″ holes per charge using two 18V LXT® 5.0Ah batteries
- Powerful BL™ Brushless motor delivers 0-980 RPM, 0-5,000 BPM and 2.3 ft.lbs. of impact energy to handle the most demanding applications
- Dust extraction capability with optional OSHA Table 1 compliant On-Board Dust Extractor Attachment
- Anti-Vibration Technology (AVT®) is an active internal counterbalance system which is engineered to reduce vibration for increased comfort
- Vibration-absorbing back handle and side handle further reduce vibration and increase comfort on the job
-
Free Shipping
$381.25
Features
- Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- Compact and ergonomic design at only 12-7/8″ long
- Weighs only 7.2 lbs. with battery (battery not included) for reduced operator fatigue
- Variable speed trigger enables user to match the speed to application for greater versatility
-
Free Shipping
$200.00
Features
- Makita-built variable speed motor delivers 0-1,200 RPM and 0-4,000 BPM
- 3-mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only” for multiple applications
- Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
- Faster drilling with synchronized RPM and BPM
- Job site tested shock absorbent handle protects the battery housing for extra durability
-
Free Shipping
$557.50
Features
- Selectable horizontal/vertical cross reference lines required for level, align and plumb applications
- Up to 10 hours of continuous run time using included Makita 12V max CXT® 2.0Ah rechargeable battery; up to 20 hours of continuous run time using a 12V max CXT® 4.0Ah battery
- Green line visibility range up to 115’ depending on ambient light and detectable up to 262′ with Makita Laser Detector LE00855702 (sold separately)
- Bright 525 nm class II green laser for best-in-class visibility with +/-1/8” at 33’ for best-in-class accuracy
- Laser line fan angle spans past the 180° horizontal line and 160° vertical line positions for full reference line coverage
-
Standard Shipping
$172.50
Features
- Equipped with Bluetooth® to wirelessly connect your mobile device
- Lantern delivers up to 310 lumens in a 360° pattern
- High-luminance L.E.D. flashlight provides 200 lumens
- Push-button operated digital tuner with 9 programmable stations for FM radio
- Radio runs up to 28 hours; Lantern runs 16 hours; Lantern and Radio run 10 hours with an 40V max XGT® 2.5Ah battery (battery not included)
-
Standard Shipping
$156.25
Features
- 4-mode operation: delivering 600 lumens on Spot, 1,000 lumens on Flood, 1,250 lumens on Spot/Flood, and Strobe mode
- Illuminates up to 640 yards in Spot and Spot/Flood mode
- Up to 10 hours of continuous illumination in Spot mode with 4.0Ah 40V max XGT® battery (battery not included)
- 90º pivoting head for user convenience
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
-
Standard Shipping
$105.25
Features
- High-luminance 18 L.E.D. flashlight provides 500 lumens on high
- 3-mode operation: delivers 500 lumens on High, 250 lumens on Medium, and 100 lumens on Low
- Flashlight head folds up and down with 7 positive stops and rotates left to right for multiple lighting angles
- Up to 82 hours of illumination with 4.0Ah 40V max XGT® Battery (battery sold separately)
- Up to 51 hours of illumination with 2.5Ah 40V max XGT® Battery (battery sold separately)
-
Standard Shipping
$63.12
Features
- High-luminance 4 L.E.D. flashlight provides 160 lumens
- 170° pivoting head with 12 positive stops
- Up to 55 hours of illumination with 4.0Ah 40V max XGT® Battery (battery sold separately)
- Up to 34 hours of illumination with 2.5Ah 40V max XGT® Battery (battery sold separately)
- Metal hang hook is convenient and job site durable
-
Free Shipping
$381.25
Features
- 3-mode operation: delivers 10,000 lumens on High, 4,000 lumens on medium, and 2,000 lumens on Low
- Up to 2.4 hours of continuous illumination with two 4.0Ah 40V max XGT® batteries on high (batteries and charger not included)
- Up to 14 hours of continuous illumination with two 4.0Ah 40V max XGT® batteries on low (batteries and charger not included)
- Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions
- L.E.D. lights effectively illuminate work area without the high heat of halogens
-
Free Shipping
$237.50
Features
- 3-mode operation: delivers 3,600 lumens on High, 1,800 lumens on Medium, and 900 lumens on Low
- Up to 3.5 hours of continuous illumination with a 4.0Ah 40V max XGT® battery on high (battery and charger not included)
- Up to 15 hours of continuous illumination with a 4.0Ah 40V max XGT® battery on low (battery and charger not included)
- Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions
- L.E.D. lights effectively illuminate work area without the high heat of halogens
-
Standard Shipping
$186.25
Features
- 2-mode operation: delivers 1,100 lumens on High and 450 lumens on Low
- Up to 22 hours of continuous illumination on low with a 4.0Ah 40V max XGT® (battery and charger not included)
- Up to 10 hours of continuous illumination on high with a 4.0Ah 40V max XGT® (battery and charger not included)
- Compatible with Makita® 40V max XGT® and 18V LXT® batteries (batteries not included)
- Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions
-
Standard Shipping
$44.89
ADD TO CART & CHECK OUT. Once we receive your request, we will contact you with pricing for shipping and to collect payment info for this product.
