Showing 1–40 of 285 resultsSorted by popularity
-
Features:
- Double Tying Speed increases productivity
- Cost Saving – Mechanism dispenses precise amount of wire
- Shorter Tie Height
- Large Jaw – up to #7 x #7 rebar
- Long Battery Life up to 4,000 ties
- Easy Push Gear Release
- Fast Load Wire
-
$299.99
Features
- Brushless motor delivers up to 75% more runtime vs. 18v NiCad brushed motors
- XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs
- 1/2-in ratcheting nitro-carburized metal chuck with carbide inserts
- 3-Mode LED up to 20X brighter than previous model
- LED spotlight mode features 20 minute shutoff function allowing for extended work time
- 3-speed all-metal high performance transmission
- 0-450/0-1300/0-2000 RPM in drill mode
- 0-500/0-1500/0-2250 RPM in hammer drill mode
-
$3,312.97
Features:
- Ties up to #9 x #10 rebar
- Double The Speed – Dual Wire Feeding Mechanism
- Dispenses precise amount of wire needed to form a tie
- Shorter Tie Height
- One charge yields up to 4,000 ties
- Easy Load Tie Wire with Quick Load magazine
-
$99.99
Features
- Complete a wide variety of applications with up to 1,500 in-lbs of torque
- Bright LED with 20 second trigger delay for working in dark or confined spaces
- Variable speed trigger allows for control and precision on delicate work surfaces
- Easily change bits with quick release hex chuck
-
$247.67
Max USA Battery Charger The JC925 (JC925A) is a charger for select rebar tying tool and rebar cutter/bender batteries from Max USA. This charger delivers a full charge in 65 minutes achieving 80% in just 50 minutes regardless of AH rating. Charges OEM lithium ion (Li-on) batteries for the following Max tools: RB218 RB398 RB518…
-
Features
- 13 Amp motor
- 9000 rpm no-load speed for applications with 6 in. grinder wheels
- Brake engages when trigger is released with stopping speeds of 1.5 seconds when using a standard grinding wheel (4-1/2 in. x 1/4 in. bonded abrasive wheel, non-hubbed)
- Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut the grinder off
- E-CLUTCH® activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor
- Up to 30% more power vs the DCG414 Grinder
-
$699.99
Features
- Dewalt DCS578X2 features Up to 47% more power vs the DCS575**
- Uses a 7-1/4 in. circular saw blade and features a maximum cut depth of 2-9/16 in. at a 90° bevel.
- Maximum bevel capacity of 57° with bevel stops at 22.5° and 45°
- Electric brake stops the blade after the trigger is released
- Integrated LED for increased visibility and cut accuracy
- Integrated rafter hook for quick and easy storage
-
Features
- The Dewalt DCS692X2 prevents accidental activation with a 2-stage trigger switch
- Connect to other compatible tools and operate cord-free with WIRELESS TOOL CONTROL
- Real-time power and runtime feedback to help you manage your output with an integrated heavy-load indicator light
- 3-1/4 in. cut depth for single pass in pavestones, rebar cutting, and concrete scoring
-
$3,028.90
Features:
- Replaces RB441T
- Fastest Tying Speed
- Cost Saving – Uses Less Wire!
- Short Tie Height
- Easy Wire Loading
- Easy Handling
- Built To Last
-
4% OFF
$317.99 Original price was: $317.99.$305.27Current price is: $305.27.
Features
- 77% more power when paired with FLEXVOLT batteries
- delivers 5,500 RPM for faster cutting
- Maximum depth of cut of 2-9/16 in. at a 90°
- Maximum depth of cut of 2 in. at a 45°
- Electric brake
-
$240.99
Features
- Makita MP001GZ01 powerful Cordless High-Pressure Inflator delivers up to 160 PSI
- High visibility pressure gauge display with back light
- Auto-stop function automatically stops inflation
- Three speed settings (High/Medium/Low)
- 25-1/2in hose length
-
$617.99
Features
- 3.0 joules of impact energy provides corded power without the cord.
- Optimized ergonomic design provides excellent control in all orientations
- Durable three mode German engineered mechanism
- Wide optimal drilling range between 1/4 in. and 3/4 in.
- Factory-set clutch reduces sudden, high-torque reactions if bit jams.
- Optimized ergonomic design provides an exceptional drilling and chipping experience in overhead, horizontal and downward orientations.
- Constant speed under load for fast speed of application
-
$699.99
Features:
- 2 nails per second (16D / 8D / 6D)
- 900 nails per charge (w/ 36V 2.5Ah MultiVolt battery)
- Pneumatic-like feel with no gas, no hose, no compressor and zero ramp-up time
- Compatible with Duplex fasteners: 50214-6D: 2-1/4 x .131, 50234-8D: 2-3/4 x .131, 50312-16D: 3-1/2 x .131
-
14% OFF
Features
- Makita XWT15Z features 240 ft.lbs. of Fastening Torque and 430 ft.lbs. of Nut-Busting Torque
- 3 forward and 3 reverse Auto-Stop modes
- 4-speed power selection
- Weighs only 4.0 lbs. with battery
- Tool Only
-
Features
- DeWalt DCK4050M2 Combo Kit
- DCD805: 40% more power versus the DCD796B using DCB205 battery or DCBP034 DEWALT POWERSTACK battery (sold separately)
- DCF850: Brushless motor that delivers up to 1,825 in-lb of torque and 3,250 rpm for driving large-diameter screws
- DCS356: The DUAL-GRIP variable-speed trigger and 3-speed selector provide ultimate speed and application control, and the bright LED illuminates dark workspaces.
- DCS382: FAST CUTS: Rapidly saw through various materials with 1-1/8 in. stroke length
-
$329.99
Features
- Mix up to 19 premixed drywall buckets (4.5 gal) on a single charge using DCB606 Flexvolt battery (6Ah).
- Mix up to 17 buckets of tile mortar (5 gal) on a single charge using DCB606 Flexvolt battery (6Ah)
- Mix up to 9 buckets of concrete (4.5 gal) on a single charge using DCB606 Flexvolt battery (6Ah)
- Integrated E-Clutch® System helps to improve user control.
- 3-Position side handle allows for optimum position while mixing.
-
Features
- DISCONTINUED, REPLACED with DCE512B
- Wide-range, variable speed control
- Multiple hanging options, free-standing, hang hooks, tripod-mount and wall-mount
-
24% OFF
$160.99 Original price was: $160.99.$121.97Current price is: $121.97.
Features
- IP 54 Rated
- Powerful Upgraded Motor to Provide Up To 650 CFM
- Multiple hanging options – freestanding, hang hooks, and wall mount
- Wide-Range, Variable Speed Control
- Up to 4.5 Hours runtime on MAX airspeed (using a DEWALT 5.0Ah Battery)
-
Features
- DISCONTINUED – SEE DCS692X2 FOR UPDATED MODEL
- Cuts up to 25.5 ft. of 1 in. scoring in cure concrete per charge
- 3-1/4 in. depth of cut for single pass in pavestones, rebar cutting, and concrete scoring
- Heavy-load indicator light provides power and runtime feedback during demanding applications
- 5-position rotatable guard for approach angle selection, allowing for optimal visibility and accessibility when cutting in tight spaces
- Dual-sided water feed system offers an OSHA Table 1 Compliant solution for dust management when cutting concrete
-
4% OFF
$152.50 Original price was: $152.50.$146.40Current price is: $146.40.
Features
- Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
- Provides up to 65% more run time per charge compared to BL1830
- Reaches full charge in 45 minutes or less
- Compatible only with STAR Protection tools, indicated by the Star symbol™ and/or yellow battery receiver under the tool
-
$227.99
Features
- The Makita XBU07Z18V; 3-tools-in-1: blower, vacuum and mulcher for convenient clean-up
- 10:1 mulch ratio reduces up to 10 bags of leaves down to 1 bag with shredding blade
- Makita-built brushless motor delivers up to 148 CFM and 143 MPH of blowing force
- Brushless motor delivers up to 215 CFM and 13″ water lift of suction power
XBU07 Instruction manual
-
$741.99
Features
- Makita AC001GM1 Drives up to 700 finish nails using a fully charged 40V XGT® 4.0Ah battery
- Quiet Series designed with low noise emission at only 68 dB; ideal for indoor use
- Lightest weight cordless compressor in its class; up to 10 lbs. lighter*
- Up to 20% faster refill time from empty to full*
- Drives up to 1,400 finish nails using a fully charged 40V XGT® 8.0Ah battery (8.0Ah battery not included)
-
-
$159.99
Features
- JOB-SPECIFIC ADJUSTABILITY: Change length from 51 in. to 74 in. as you extend and rotate padded hooks 360° to fit most SUV/truck hoods
- PROTECTS SUV/TRUCK SURFACE: Anti-marring hooks designed to keep from scratching your vehicle’s paint
- VERSATILE COMPATIBILITY: Works with all 12V MAX/20V MAX/60V MAX batteries (excluding DCB615)
- FULL CONTROL of light with high, low, and single-arm modes
- EASY TRANSPORT and storage with foldable design
-
$699.99
Features
- Makita GSH01M1 features Makita-built brushless motor delivers 6,000 RPM
- Die-cast magnesium base, blade guard, and blade cover
- Large 2-5/8in cutting capacity at 90 deg
- AWS Capable for wireless power-on/off
- Electric brake
-
$3,681.93
- Tie up to #14 x #14 with 19ga wire
- Up to 4,100 ties per charge
- Uses 19 gauge TW1061T series wire
-
$158.99
Features
- Compact size ideal for precision trimming and edging
- 2-tools-in-1: 180º rotating head allows the trimmer to convert to edger
- Telescoping shaft (48-1/4” to 56-1/2”) for optimum cutting position
- Adjustable 5-position pivoting head for cutting angle adjustment when trimming in tight spaces
- Makita-built motor delivers 7,800 RPM for faster cutting
-
$448.99
Features
- The Dewalt DCF403D1 features a brushless motor delivers up to 2,100 lb of pulling force for fastening rivets, including those made of stainless steel
- 800 RIVETS PER CHARGE** to maximize productivity on the jobsite
- DESIGNED FOR EASE OF USE with tool-free nose change and on-board nose piece storage
- COMPATIBLE WITH MUTIPLE SIZE RIVETS including 3/32″, 1/8″, 5/32″, and 3/16″ rivets
- CAPABLE OF PULLING aluminum, steel, and stainless steel blind rivets
-
$600.99
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver powerful grinding and up to 60% faster cutting speed than predecessor models
- X-LOCK quick change system allows for tool-free wheel changes with simple snap-on mounting and pull release lever for change-out
- Electronic current limiter helps protect the motor from overload in high torque application
- Variable speed control dial allows for RPM adjustment (3,000-8,500) to match the speed to the application
- Auto-start Wireless System (AWS®) utilizes Bluetooth® technology for wireless power-on/off communication between tool and dust extractor (AWS® Transmitter sold separately)
-
Features
- 19.4 Joules of impact energy for fast drilling and chipping, even in the hardest concrete.
- Anti-Rotation E-CLUTCH System shuts down the tool in bind up situations.
- Constant speed electronics allows the tool to maintain speed under load
- The SHOCKS Active Vibration Control System reduces vibration felt by the user at the handles, compared to rotary hammers without this feature.
- The heavy weight design makes it ideally suited for horizontal and downward drilling for #9 – #14 rebar dowel applications and dry coring up to 6 in.
-
$1,008.99
Features
- 6.1 Joules of impact energy for fast drilling and chipping, even in the hardest concrete.
- Anti-Rotation E-CLUTCH ® System shuts down the tool in bind up situations.
- Constant speed electronics allows the tool to maintain speed under load.
- System reduces vibration felt by the user at the handles, compared to rotary hammers without thsis feature.
- The light weight design makes it ideally suited for horizontal drilling for #3 – #6 rebar dowel applications and dry coring up to 3 in.
-
$1,129.99
Features
- Dewalt DCH775X2 offers rapid drilling and chipping in hard concrete with 19.4 J of impact energy
- Maintain speed under heavy loads with constant speed electronics
- Efficient performance and runtime with brushless motor and German-engineered apparatus
- Pro-grade versatility: Tackle horizontal and downward drilling for #9 – #14 rebar dowel applications, dry coring up to 6 in., chipping in any lower wall and floor, bushing, and ground rod driving
- Reduced vibration for comfortable grip Active Vibration Control
-
$478.99
Features
- Drives up to 700 finish nails using a fully charged 40V XGT® 4.0Ah battery (battery not included)
- Quiet Series designed with low noise emission at only 68 dB; ideal for indoor use
- Lightest weight cordless compressor in its class; up to 10 lbs. lighter*
- Up to 20% faster refill time from empty to full*
- Drives up to 1,400 finish nails using a fully charged 40V XGT® 8.0Ah battery (battery not included)
-
4% OFF
$164.99 Original price was: $164.99.$158.39Current price is: $158.39.
Features
- DCC020IB features three power sources for on the go [20V MAX battery, 12V DC, or 110V AC]
- Convenient onboard accessory storage
- Heavy-duty rubber feet help reduce walking when in use
- Threaded chuck for secure connection to inflation valve
- High-pressure inflation mode with automatic shutoff
DCCO20IB Instruction Manual
-
$177.99
Features
- Lightweight and compact for ultimate portability
- Ergonomics optimized for one-handed use
- Brushless motor for enhanced performance and extended life
- LED to help illuminate dark workspaces
- Variable-speed trigger provides user with improved speed control
-
$192.99
Features
- Powerful motor delivers up to 740 CFM on high setting
- Three speed settings (High/Medium/Low) and Oscillation selector for optimal air velocity and control
- Designed for reduced wind noise level for quiet operation at only 52 dB
- Oscillates 45º right and left
- Up to 14 hours of continuous run time in Low speed with 18V LXT® 6.0Ah Battery BL1860B (battery not included)
-
$201.99
Features
- Powerful motor delivers up to 740 CFM on high setting
- Three speed settings (High/Medium/Low) and Oscillation selector for optimal air velocity and control
- Automatically oscillates 45º right and left
- Manually tilts 90º up and 45º down for convenient redirection of airflow
- 3-stage automatic timer with 1, 2, and 4 hour power-off selection
