Showing 81–120 of 122 resultsSorted by popularity
-
$681.99
Features
- Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
- Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
- Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode (battery not included)
- Compact and ergonomic design at only 77″ long
- Weighs only 10.6 lbs. with battery for reduced operator fatigue (battery not included)
-
$802.99
Features
- Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
- Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
- Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode (battery not included)
- Compact and ergonomic design at only 99″ long
- Weighs only 17.2 lbs. with battery for reduced operator fatigue (battery not included)
-
$6.99
Features
- Marking paint covers more linear feet per can than other brands
- Use on grass, gravel, dirt, concrete, asphalt and more
- Precision tip results in virtually no overspray
- Resists early fading and chalking; lasts up to 30 days
-
$6.99
Features
- Long Lasting
- Water Based
- Fade Resistant
- Durable
-
4% OFF
$1,192.99 Original price was: $1,192.99.$1,145.27Current price is: $1,145.27.
Features
- Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
- Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode
- Compact and ergonomic design at only 99″ long
- Weighs only 17.2 lbs. with battery for reduced operator fatigue
-
$798.99
Features
- Makita-built motor delivers 12,500 VPM to help increase strength of concrete
- Dual directional switch to conveniently hold the tool in either horizontal or vertical positions
- Compact and ergonomic design at only 105-1/2″ long
- Protective cover helps prevent battery contamination
- 18V LXT® Lithium-Ion 5.0 Ah battery BL1850B reaches a full charge in 45 minutes or less
-
$22.90
Features
- 50% taller (13mm) segments are designed for longer life and faster cutting
- Up to 4x longer life than competitive blades
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- Carefully tensioned for less vibration and a superior user experience
- Dry or wet cutting for added versatility
- Made with high quality diamonds
- For smoother and finer cuts in masonry products
-
$106.15
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
$92.33
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
$142.89
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 31″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
$74.48
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
$134.20
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 31″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
$70.33
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
$63.96
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
$120.27
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
-
$49.20
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
$45.37
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
$56.42
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$41.43
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$95.10
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 31″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$43.67
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$35.81
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$90.31
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 31″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$43.35
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$34.53
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$40.91
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$30.50
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$35.70
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$28.26
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$35.47
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$26.46
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$31.45
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$26.46
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 10″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$10.52
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 10″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$8.61
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 10″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
23% OFF
$25.99 Original price was: $25.99.$19.99Current price is: $19.99.
Features
- Diamond segment SPEED-Edge slot design reduces vibration, providing high cutting speeds that deliver up to 30% faster cuts than standard segmented diamond discs
- 60% taller segments containing superior quality diamonds along with an ultra-durable bond to the disc body for up to 4x longer life
- Hardened disc body absorbs vibration and increases impact resistance to deliver superior quality cuts in hardened materials
-
23% OFF
$31.99 Original price was: $31.99.$24.79Current price is: $24.79.
Features
- Diamond segmented SPEED-Edge slot design reduces vibration, providing high cutting speeds that deliver up to 30% faster cuts than standard segmented diamond discs.
- 60%taller segments containing superior quality diamonds along with an ultra-durable bond to the disc body for up to 4x longer life
- Hardened disc body absorbs vibration and increases impact resistance to deliver superior quality cuts in hardned materials
-
35% OFF
$39.99 Original price was: $39.99.$25.99Current price is: $25.99.
Features
- Superior quality diamon edge rim design for up 60% smoother cuts, resulting in chip-free cuts without burn marks
- Hardened disc body absorbs vibration and increases impact resistance to deliver quality cuts in hardened materials
- Ultra -thin constant contact continuous turbo rim design provides precise cuts at high rates of speed
-
23% OFF
$60.39 Original price was: $60.39.$46.69Current price is: $46.69.
Features
- L- Shaped diamon Segments for a clean, smooth finish with fast grinding action and long wheel life
- Exra-wide slots deliver efficient dust extraction
- Optimized L -shaped diamonds segments and diamond distribution lead to constant diamond exposure for maximum performance in concrete grinding applications
-
$6.99
Features:
- Sharp coarse grit silicon carbide grain for asphalt, green concrete, asphalt over concrete, abrasive blocks, mortar and other abrasive materials
- Constructed with two full layers of reinforcing for lower-power machines, and light to medium applications where speed of cut is a primary selection criterion
- Patented Universal Arbor will allow a single blade to be run on saws with either 1 in. or 20mm arbors
- A good mix of value and consistent performance when initial price is another primary purchasing consideration
Minimum order quantity: 10
Order in multiples of: 10
