wood framing connectors optimized for efficient operation and long-lasting reliability. Ideal for a wide range of uses requiring strength and consiste
Showing all 13 resultsSorted by popularity
-
Simpson Strong-Tie LU28 LU Galvanized Face-Mount Joist Hanger for 2×8
$0.94Features:
- LU-series hangers are tested, load rated and code compliant
- The LU series installs using several fastener selections with tested allowable loads
- Precision-formed engineered for installation ease and design value
- Seat width: 1-9/16 in.
- Nominal joist size: 2×8, 2×10
-
THA418 17-1/2 in. Galvanized Adjustable Hanger for 4x Floor Truss
$5.79Features:
- THA418 offers extra-long straps for height adjustability and top-flange installation
- Zinc Galvanized, G90 Finish
- Top-flange or face-mount installation
-
Simpson Strong-Tie LRU26Z LRUZ ZMAX Galvanized Slopeable Light Rafter U Hanger for 2×6
$5.29Features
- Adjustable slope
- Open U-shape design
- Optimized fastener placement
- Versatile fastening options
- LRU26Z is field installable
-
Simpson Strong-Tie LUS26 LUS Galvanized Face-Mount Joist Hanger for 2×6
$1.19Features
- LUS26 cannot be modified
- Works for a wide range of applications
- LUS-series hangers are tested, load rated and code compliant
-
Simpson Strong-Tie SSP 18-Gauge Galvanized Single Stud Plate
$1.22Features:
- SSP can be used to make a connection to either the top or bottom plate
- Embossment in the angle reinforces the plate
- Sill plate installation: fill all round holes
- Width: 1-3/8 in.
- Height: 6-11/16 in.
-
Simpson Strong-Tie LUS210Z LUS ZMAX Galvanized Face-Mount Joist Hanger for 2×10
$2.41Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- LUS210Z offers speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: 2×10, 2×12, 2×14
-
Simpson Strong-Tie HTS24 HTS 24 in.14-Gauge Galvanized Heavy Twist Strap
$3.81Features:
- Available with the bend reversed
- Straps do not need to be wrapped over the truss to achieve the allowable load
- Versatile with many lengths offered to fit the specific application
- HTS24 Length: 24 in.
- Made from 14-gauge steel
-
Simpson Strong-Tie STHD10 STHD 24-5/8 in. 12-Gauge Galvanized Strap-Tie Holdown
$20.79Features:
- The nailing pattern on STHD10 allows for nailing to the edges of double 2x’s
- Strap nail slots are countersunk to provide a lower nail head profile
- The slots below the embedment line enable increased front-to-back concrete bond and help to reduce spalling
- Standard strap length: 24-5/8 in.
- Made from 12-gauge steel
-
Simpson Strong-Tie BC4Z-R BC ZMAX Galvanized Post Cap for 4x
$12.27Features
- BC4Z-R offers increased lateral resistance
- High load capacity
- Light-duty construction
- Corrosion resistant
-
Simpson Strong-Tie HDQ8-SDS3 HDQ 14-in. Galvanized Holdown w/ Strong-Drive SDS Screws
$77.26Features:
- SDS screws are supplied with the holdowns to ensure proper fasteners are used
- No stud bolts to countersink at openings
- HDQ8-SDS3 Height: 14 in.
- Made from 7-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
Simpson Strong-Tie LGT2 LGT 2-Ply Girder Tiedown
$13.49Features:
- LGT2 is suitable for retrofit applications
- The embossments add stiffness in crucial areas for improved performance
- Simple to install and can be installed on the inside or outside of the wall
- Load rated to resist high-wind forces
- 2-ply
-
Simpson Strong-Tie HTS16 HTS 16 in. 14-Gauge Galvanized Heavy Twist Strap
$2.59Features:
- Available with the bend reversed; specify –REV- after the model number, such as HTS16-REV
- Versatile with many lengths offered to fit the specific application
- Straps do not need to be wrapped over the truss to achieve the allowable load
- Length: 16 in.
- Made from 14-gauge steel
-
Simpson Strong-Tie HTS20 HTS 20 in. 14-Gauge Galvanized Heavy Twist Strap
$3.02Features:
- Available with the bend reversed; specify –REV- after the model number, such as HTS20-REV
- Versatile with many lengths offered to fit the specific application
- Straps do not need to be wrapped over the truss to achieve the allowable load
- Length: 20 in.
- Made from 14-gauge steel
