structural anchoring

structural anchoring designed for reliable performance in demanding applications. Ideal for a wide range of uses requiring strength and consistency.

  • AT-XP Acrylic AT-XP10 10ozSimpson Strong-Tie CDT10S Manual Dispensing Tool for 10 oz. Single-Cartridge Adhesives product image

    Simpson Strong-Tie AT-XP10 AT-XP 9.4 oz. High-Strength Acrylic Anchoring Adhesive Cartridge w/ Nozzle

    This item has been DISCONTINUED.

    • SEE AT3G10 FOR UPDATED MODEL
    Request QuoteDone SOLD OUT
  • SET3G22-NSimpson Strong-Tie SET3G22-N 22-oz. High-Strength Epoxy Adhesive w/ Nozzle and Extension product image

    Simpson Strong-Tie SET3G22-N 22-oz. High-Strength Epoxy Adhesive w/ Nozzle and Extension

    $52.79

    Features

    • SET3G22-N is ICC-ES ESR-4057 approved for post-installed anchoring and rebar splice design
    • Includes mixing nozzle and extension for simplified installation
    • Low-odor formula, approved for potable water applications
    • Compatible with wire brush cleaning or vacuum-drill systems without extra hole cleaning
    Add To CartDone
  • DIAB50 Simpson drop-in anchor

    Simpson Strong-Tie DIAB50 DIAB Drop-In Internally Threaded Anchor for 1/2-in. Rod

    $0.43

    Features:

    • Faster installation than previous drop-in anchor design sets with 40% fewer hammer hits
    • Positive-set marking system indicates when anchor is properly set
    • Zinc-plated carbon steel
    • Length: 2 in.
    • Drill bit diameter: 5/8 in.
    Simpson Strong-tie DIAB50 Product Page
    Minimum order quantity: 50
    Order in multiples of: 50
    Add To CartDone
  • 08321SD-PWR08321SD-PWR

    DeWalt 08321SD-PWR Pure110+ 20.5 Oz [610Ml] 1-1

    $36.69

    Features

    • Designed for use with threaded rod and reinforcing bar hardware elements
    • Evaluated and recognized for freeze/thaw performance
    • Cartridge design allows for multiple uses using extra mixing nozzles
    • Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
    • Evaluated and recognized for long term and short term loading (see performance tables)
    Add To CartDone
  • THD50500HMGTHD50500HMG

    Simpson Strong-Tie THD50500HMG Titen HD 1/2 in. x 5 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $5.31

    Features:

    • THD50500HMG is qualified for static and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
    • Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
    • Hex-washer head requires no separate washer and provides a clean installed appearance
    Add To CartDone
  • Max CP-C838W7-SF 1-1/2x0.145in PowerLite High Pressure Smooth Shank Concrete Pin product imageMax CP-C838W7-SF 1-1/2x0.145in PowerLite High Pressure Smooth Shank Concrete Pin product image

    Max CP-C838W7-SF 1-1/2×0.145in PowerLite High Pressure Smooth Shank Concrete Pin

    Original price was: $102.77.Current price is: $75.00.
    • CLOSEOUT SALE WHILE STOCK LASTS
    • 1-1/2×0.145in Smooth Shank Concrete Pin
    • Max Powerlite Fasteners
    • Plywood To Concrete
    • Fiber Cement Siding To Concrete
    • Mechanically Galvanized Carbon Steel
    Add To CartDone
  • PFM1411800

    [Pack of 50] DeWalt PFM1411380 1/2″ x 3″ Screw-Bolt+ Concrete Screw Anchor, Hex Washer Head, Zinc

    $65.99

    Features

    • PFM1411380 is designed for standard ANSI tolerance drill bits
    • Patented thread design offers low installation torque
    • Tough threads for tapping high strength concrete
    • Ratchet teeth on underside of hex washer head lock against the fixture
    • Can be installed closer to the edge than traditional expansion anchors
    Add To CartDone
  • PFM1411800

    [Pack of 100] DeWalt PFM1411020 1/4″ x 1-3/4″ Screw-Bolt+ Concrete Screw Anchor, Hex Washer Head, Zinc

    $29.95

    Features

    • PFM1411020 is designed for standard ANSI tolerance drill bits
    • Patented thread design offers low installation torque
    • Tough threads for tapping high strength concrete
    • Ratchet teeth on underside of hex washer head lock against the fixture
    • Can be installed closer to the edge than traditional expansion anchors
    Add To CartDone
  • Simpson Strong-Tie ET-HP22-N ET-HP 22-oz. Epoxy Adhesive Cartridge with Nozzle product imageSimpson Strong-Tie ET-HP22-N ET-HP 22-oz. Epoxy Adhesive Cartridge with Nozzle product image

    Simpson Strong-Tie ET-HP22-N ET-HP 22-oz. Epoxy Adhesive Cartridge with Nozzle

    • This item has been DISCONTINUED.- SEE ET3G22-N FOR UPDATED MODEL
    Request QuoteDone SOLD OUT
  • THD37400CS6SSTHD37400CS6SS

    [25 Pack] Simpson Strong-Tie THD37400CS6SS Titen HD 3/8 in. x 4 in. Type 316 SS Countersunk Head Heavy-Duty Screw Anchor

    $158.45

    Features

    • THD37400CS6SS is tested in accordance with ACI 355.2, AC193 and AC106
    • Countersunk head allows screw anchor applications incompatible with a hex head
    • Available in 1/4″ and 3/8″ diameters
    Add To CartDone
  • 7446SD1-PWR concrete wedge anchor

    [Pack of 50] DeWalt 7415SD1-PWR 3/8 X 3-3/4 Power-Stud Plus SD1 Wedge Expansion Anchor

    $29.99

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • PFM1411800

    [Pack of 100] DeWalt PFM1411060 1/4″ x 2-1/4″ Screw-Bolt+ Concrete Screw Anchor, Hex Washer Head, Zinc

    $39.99

    Features

    • PFM1411060 is designed for standard ANSI tolerance drill bits
    • Patented thread design offers low installation torque
    • Tough threads for tapping high strength concrete
    • Ratchet teeth on underside of hex washer head lock against the fixture
    • Can be installed closer to the edge than traditional expansion anchors
    Add To CartDone
  • THD75500HTHD75500H

    [5 Pack] Simpson Strong-Tie THD75500H Titen HD 3/4 in. x 5 in. Heavy-Duty Screw Anchor

    $38.93

    Features

    • THD75500H is tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THDB25234H[50 Pack] Simpson Strong-Tie THDB25234H Titen HD 1/4 in. x 2-3/4 in. Heavy-Duty Screw Anchor product image

    [50 Pack] Simpson Strong-Tie THDB25234H Titen HD 1/4 in. x 2-3/4 in. Heavy-Duty Screw Anchor

    $39.00

    Features

    • Efficient load transfer
    • Clean finish
    • THDB25234H is code compliant with (ACI355.2, AC193, and AC106)
    Add To CartDone
  • masa layer-scaled - Simpson Strong-Tie MASA MASA 16-Gauge Galvanized Mudsill Anchorhmas layer-scaled - Simpson Strong-Tie MASA MASA 16-Gauge Galvanized Mudsill Anchor

    Simpson Strong-Tie MASA MASA 16-Gauge Galvanized Mudsill Anchor

    $1.85

    Features:

    • Attaches easily to the concrete form for quick installation
    • Lays flat on the form board so there is no anchor bolt to finish around
    • No labor costs involved in drilling plates and aligning holes
    • Flat design eliminates chances of modification in prefabricated walls
    • Eliminates the need to notch studs due the anchor bolts being placed where it will interfere

     

    Simpson Strong-tie MASA Product Page
    Add To CartDone
  • PFM1411800

    [Pack of 100] DeWalt PFM1411100 1/4″ x 3″ Screw-Bolt+ Concrete Screw Anchor, Hex Washer Head, Zinc

    $39.90

    Features

    • PFM1411100 is designed for standard ANSI tolerance drill bits
    • Patented thread design offers low installation torque
    • Tough threads for tapping high strength concrete
    • Ratchet teeth on underside of hex washer head lock against the fixture
    • Can be installed closer to the edge than traditional expansion anchors
    Add To CartDone
  • THD50400H[20 Pack] Simpson Strong-Tie THD50400H Titen HD 1/2 in. x 4 in. Heavy-Duty Screw Anchor product image

    [20 Pack] Simpson Strong-Tie THD50400H Titen HD 1/2 in. x 4 in. Heavy-Duty Screw Anchor

    $44.99

    Features

    • THD50400H has been tested for seismic-rated applications
    • Strong grip
    • Durable build
    • Effortless installation
    Add To CartDone
  • THDB62600WHTHDB62600WH

    [10 Pack] Simpson Strong-Tie THDB62600WH Titen HD 5/8 in. x 6 in. Washer-Head Heavy-Duty Screw Anchor

    $49.43

    Features

    • THDB62600WH is tested in accordance with ACI 355.2 and AC193
    • Qualified for static, wind and seismic loading conditions
    • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
    • Washer head allows screw anchor applications incompatible with a hex head
    Add To CartDone
  • THDB62800WHTHDB62800WH

    [10 Pack] Simpson Strong-Tie THDB62800WH Titen HD 5/8 in. x 8 in. Washer-Head Heavy-Duty Screw Anchor

    $83.08

    Features

    • THDB62800WH is tested in accordance with ACI 355.2, AC193 and AC106
    • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
    • Countersunk head allows screw anchor applications incompatible with a hex head
    Add To CartDone
  • THD37400H4SSTHD37400H4SS

    [50 Pack] Simpson Strong-Tie THD37400H4SS Titen HD 3/8 in. x 4 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor

    $244.62

    Features

    • THD37400H4SS is ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • Installs with an impact wrench or by hand tool
    • Tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • ET3G10ET3G10

    Simpson Strong-Tie ET3G10 8.5-oz. Epoxy Adhesive Cartridge w/ Nozzle and Extension

    $22.39

    Features

    • ET3G10 is suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
    • Ideal for general doweling and threaded rod applications
    • Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)

    Anchor Technical Notes

    Add To CartDone
  • THDB62600HMGTHDB62600HMG

    [10 Pack] Simpson Strong-Tie THDB62600HMG Titen HD 5/8 in. x 6 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $74.46

    Features

    • THDB62600HMG is tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • 7446SD1-PWR concrete wedge anchor

    [Pack of 50] DeWalt 7422SD1-PWR 1/2 X 3-3/4 Power-Stud Plus SD1 Wedge Expansion Anchor

    $34.49

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • THDB62800H4SSTHDB62800H4SS

    [10 Pack] Simpson Strong-Tie THDB62800H4SS Titen HD 5/8 in. x 8 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor

    $151.23

    Features

    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • THDB62800H4SS is tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • THD50500H4SSTHD50500H4SS

    [20 Pack] Simpson Strong-Tie THD50500H4SS Titen HD 1/2 in. x 5 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor

    $160.00

    Features

    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • THD50500H4SS is tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • THDC25238H6SSTHDC25238H6SS

    [50 Pack] Simpson Strong-Tie THDC25238H6SS Titen HD 1/4 in. x 2-3/8 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor

    $183.25

    Features

    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • THDC25238H6SS is tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • THD37300CS[50 Pack] Simpson Strong-Tie THD37300CS Titen HD 3/8 in. x 3 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor product image

    [50 Pack] Simpson Strong-Tie THD37300CS Titen HD 3/8 in. x 3 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor

    $72.26

    Features

    • THD37300CS is tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Countersunk head allows screw anchor applications incompatible with a hex head
    Add To CartDone
  • THDB62612HMGF1Simpson Strong-Tie THDB62612HMGF1 Titen HD 5/8 in. x 6-1/2 in. Mechanically Galvanized Heavy-Duty Screw Anchor product image

    Simpson Strong-Tie THDB62612HMGF1 Titen HD 5/8 in. x 6-1/2 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $11.54

    Features

    • THDB62612HMGF1 is code-listed for exterior use
    • Fully removable
    • Hex washer head
    • Optimized thread design
    Add To CartDone
  • THD75700H[10 Pack] Simpson Strong-Tie THDB62100H Titen HD 5/8 in. x 10 in. Heavy-Duty Screw Anchor product image

    [10 Pack] Simpson Strong-Tie THDB62100H Titen HD 5/8 in. x 10 in. Heavy-Duty Screw Anchor

    $79.38

    Features

    • High-Strength Performance
    • Seismic & Wind Approved
    • Heat-Treated Durability
    • THDB62100H eliminates the need for a separate washer, unless directed otherwise by code
    Add To CartDone
  • THDB62500HMGTHDB62500HMG

    [10 Pack] Simpson Strong-Tie THDB62500HMG Titen HD 5/8 in. x 5 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $72.15

    Features

    • High-strength performance
    • Undercut thread design
    • Fully removable
    • THDB62500HMG is mechanically galvanized for corrosion resistance (ASTM B695 Class 65)
    Add To CartDone
  • 7446SD1-PWR concrete wedge anchor

    [Pack of 50] DeWalt 7412SD1-PWR 3/8 X 2-3/4 Power-Stud Plus SD1 Wedge Expansion Anchor

    $17.79

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • [Pack of 12] Simpson Strong-Tie SET3G10 8.5-oz. High-Strength Epoxy Adhesive w/ 1 Nozzle and Extension product imageSET3G10

    [Pack of 12] Simpson Strong-Tie SET3G10 8.5-oz. High-Strength Epoxy Adhesive w/ 1 Nozzle and Extension

    $316.84

    Features

    • SET3G10 REPLACES SET-XP10
    • Improved sustained load performance at elevated temperature.

    Strong-Tie Anchorage Adhesives

    Add To CartDone
  • ET3G10[Pack of 12] Simpson Strong-Tie ET3G10 8.5-oz. Epoxy Adhesive Cartridge w/ Nozzle and Extension product image

    [Pack of 12] Simpson Strong-Tie ET3G10 8.5-oz. Epoxy Adhesive Cartridge w/ Nozzle and Extension

    $249.09

    Features

    • ET3G10 is suitable for use in cracked and uncracked concrete and masonry
    • Ideal for general doweling and threaded rod applications
    • Dot-Approved

    Anchor Technical Notes

    Add To CartDone
  • DFD270SKDFD270SK

    Dewalt DFD270SK Fully-Automatic .27 Caliber Powder-Actuated Tool [Single Shot Kit]

    $1,033.99

    Features

    • Drives into concrete and steel substrates for application versatility
    • Adjustable power settings for application versatility
    • Automatic piston return and load advancement for fast application speed
    • Tool-free disassembly for easy, onsite cleaning and serviceability
    Add To CartDone
  • THD50800WHTHD50800WH

    [15 Pack] Simpson Strong-Tie THD50800WH Titen HD 1/2 in. x 8 in. Washer-Head Heavy-Duty Screw Anchor

    $87.26

    Features

    • THD50800WH is tested in accordance with ACI 355.2 and AC193
    • Qualified for static, wind and seismic loading conditions
    • Washer head allows screw anchor applications incompatible with a hex head
    Add To CartDone
  • THDC25238CS6SSTHDC25238CS6SS

    [25 Pack] SImpson Strong-Tie THDC25238CS6SS Titen HD 1/4 in. x 2-3/8 in. Type 316 SS Countersunk Head Heavy-Duty Screw Anchor

    $102.31

    Features

    • THDC25238CS6SS is tested in accordance with ACI 355.2, AC193 and AC106
    • 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
    • Countersunk head allows screw anchor applications incompatible with a hex head
    Add To CartDone
  • THDB25312CSTHDB25312CS

    [50 Pack] Simpson Strong-Tie THDB25312CS Titen HD 1/4 in. x 3-1/2 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor

    $53.42

    Features

    • THDB25312CS is tested in accordance with ACI 355.2, AC193 and AC106
    • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
    • 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
    Add To CartDone
  • THDB25178CSTHDB25178CS

    [100 Pack] Simpson Strong-Tie THDB25178CS Titen HD 1/4 in. x 1-7/8 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor

    $85.18

    Features

    • THDB25178CS is tested in accordance with ACI 355.2, AC193 and AC106
    • 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
    • Countersunk head allows screw anchor applications incompatible with a hex head
    Add To CartDone
  • THD37300HMGTHDB62500H

    [10 Pack] Simpson Strong-Tie THDB62500H Titen HD 5/8 in. x 5 in. Heavy-Duty Screw Anchor

    $41.85

    Features

    • High Performance
    • Efficient load transfer
    • Fast installation
    • THDB62500H is heat treated at the tip to ensure optimal hardness
    Add To CartDone
  • THDC25400H6SS[50 Pack] Simpson Strong-Tie THDC25400H6SS Titen HD 1/4 in. x 4 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor product image

    [50 Pack] Simpson Strong-Tie THDC25400H6SS Titen HD 1/4 in. x 4 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor

    $202.26

    Features

    • THDC25400H6SS is ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • Tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone