residential construction engineered to deliver consistent, high-quality results. Ideal for a wide range of uses requiring strength and consistency.
Showing all 19 resultsSorted by popularity
-
Simpson Strong-Tie LUS28Z LUS ZMAX Galvanized Face-Mount Joist Hanger for 2×8
$1.89Features:
- LUS28Z offers patented double-shear nailing design provides greater strength with fewer nails
- Speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: 2×8 and 2×10
-
Simpson Strong-Tie H2.5AZ H2.5A 18-Gauge ZMAX Galvanized Hurricane Tie
$0.65Features:
- Embossments in bend line strengthen connection
- H2.5AZ top flange features an arrow line indicator to aid correct installation
- Made from 18-gauge steel
- ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
-
6″ x 6″ W2.9 6 Gauge 8′ x 20′ Wire Mesh Sheet
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- Spacing: 6 x 6
- W/D Designation: W2.9/W2.9
- Gauge: 6/6
- Weight: 42LBS
Select Options This product has multiple variants. The options may be chosen on the product page -
-
Simpson Strong-Tie H2.5A H2.5A 18-Gauge Galvanized Hurricane Tie
$0.52Features:
- Embossments in bend line strengthen connection
- The top flange features an arrow line indicator to aid correct installation
- Made from 18-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
Simpsons Strong-Tie H10A 18-Gauge Galvanized Hurricane Tie
$2.74Features
- Enhanced Stiffness
- Easy Installation
- H10A is made from 18-gauge steel for reliable strength
-
Simpson Strong-Tie LUS24Z LUS ZMAX Galvanized Face-Mount Joist Hanger for 2×4
$1.08Features
- LUS24Z cannot be modified
- Works for a wide range of applications
- Features speed prongs used to temporarily position and secure the connector for easier and faster installation
- LUS-series hangers are tested, load rated and code compliant
-
Simpson Strong-Tie LUS26 LUS Galvanized Face-Mount Joist Hanger for 2×6
$1.19Features
- LUS26 cannot be modified
- Works for a wide range of applications
- LUS-series hangers are tested, load rated and code compliant
-
Simpson Strong-Tie SSP 18-Gauge Galvanized Single Stud Plate
$1.22Features:
- SSP can be used to make a connection to either the top or bottom plate
- Embossment in the angle reinforces the plate
- Sill plate installation: fill all round holes
- Width: 1-3/8 in.
- Height: 6-11/16 in.
-
Simpson Strong-Tie LUS210Z LUS ZMAX Galvanized Face-Mount Joist Hanger for 2×10
$2.41Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- LUS210Z offers speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: 2×10, 2×12, 2×14
-
Simpson Strong-Tie LUC210Z LUC ZMAX Galvanized Face-Mount Concealed-Flange Joist Hanger for 2×10
$3.03Features:
- LUC210Z hanger is tested, load rated and code compliant
- The LUC series installs using several fastener selections with tested allowable loads
- Suitable for nominal 2×10 and 2×12 lumber
- Made from 18-gauge steel
- ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
-
2′ x 10′ Lumber 16ft
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- 16′
- 80 pieces per bundle
-
Simpson Strong-Tie MASB 16-Gauge Galvanized Masonry Mudsill Anchor
$2.39Features:
- Anchors mudsill to concrete block, poured walls or slab foundations
- Fill CMU cell with concrete grout first, then place MASB into the grouted cell and adjust into position
- Attach mudsill to anchor only after the concrete grout cures
- Nominal sill size: 2×4, 2×6
- Made from 16-gauge steel
-
Simpson Strong-Tie HTT5 11-Gauge Galvanized Heavy Tension Tie, 16 in.
$32.01Features:
- HTT5 is ideal for retrofit or new construction projects
- Can be installed with cast-in-place or post-installed anchor bolts
- Four-ply formed steel provides increased tension capacity
- Anchor bolt washers not required
- 2-1/2 in. width x 16 in. length
-
#5 PINKBAR Fiberglas Rebar 20ft lengths
Features:
- Less Weight. Less Install Time. Fewer Truckloads.
- Less Overall Cost
- 2x stronger in tensile strength compared to the same size diameter of grade 60 steel
- More Durability
- Up to 7x LIGHTER than steel
Select Options This product has multiple variants. The options may be chosen on the product page -
#4 PINKBAR Fiberglas Rebar 20ft lengths
Features:
- Less Weight. Less Install Time. Fewer Truckloads.
- Less Overall Cost
- 2x stronger in tensile strength compared to the same size diameter of grade 60 steel
- More Durability
- Up to 7x LIGHTER than steel
Select Options This product has multiple variants. The options may be chosen on the product page -
#3 PINKBAR Fiberglas Rebar 20ft lengths
Features:
- Less Weight. Less Install Time. Fewer Truckloads.
- Less Overall Cost
- 2x stronger in tensile strength compared to the same size diameter of grade 60 steel
- More Durability
- Up to 7x LIGHTER than steel
Select Options This product has multiple variants. The options may be chosen on the product page -
XVJ03Z 18V LXT Lithium‑Ion Cordless Jig Saw, Tool Only
$225.99Features:
- Delivers 0-2600 1 inch strokes per minute with 3 orbital and one straight cut setting.
- Has lower vibration and less noise.
- Weighs only 6.4lbs with battery (not included).
- Tool-less blade change.
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol
-
3/4″ 4’x8′ Plywood Sheet
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- 4ft x 8ft sheets
- 3/4″ thickness
