LIMITED TIME OFFERS

BLACK FRIDAY DEALS

CLICK HERE TO SHOP SAVINGS

HUGE SAVINGS

BLACK FRIDAY DEALS

CLICK HERE

Mechanical Anchors

Mechanical Anchors optimized for efficient operation and long-lasting reliability. Ideal for a wide range of uses requiring strength and consistency.

  • 02820-PWR

    [Pack of 100] Dewalt 02820-PWR 1/4″ X 1-1/2″ Zamac Nailin Hammer Drive Anchor, Mushroom Head

    $12.99

    Features

    • General purpose anchoring
    • 02820-PWR installs in a variety of base materials
    • Roof Flashing
    • Mechanical Attachments
    Add To CartDone
  • DIAB50 Simpson drop-in anchor

    Simpson Strong-Tie DIAB50 DIAB Drop-In Internally Threaded Anchor for 1/2-in. Rod

    $0.43

    Features:

    • Faster installation than previous drop-in anchor design sets with 40% fewer hammer hits
    • Positive-set marking system indicates when anchor is properly set
    • Zinc-plated carbon steel
    • Length: 2 in.
    • Drill bit diameter: 5/8 in.
    Simpson Strong-tie DIAB50 Product Page
    Minimum order quantity: 50
    Order in multiples of: 50
    Add To CartDone
  • THD50500HMGTHD50500HMG

    Simpson Strong-Tie THD50500HMG Titen HD 1/2 in. x 5 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $5.31

    Features:

    • THD50500HMG is qualified for static and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
    • Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
    • Hex-washer head requires no separate washer and provides a clean installed appearance
    Add To CartDone
  • THD50612HTHD50612H

    [20 Pack] Simpson Strong-Tie THD50612H Titen HD 1/2 in. x 6-1/2 in. Heavy-Duty Screw Anchor

    $65.99

    Features

    • THD50612H provides reliable anchoring
    • Optimized thread design
    • Hardened tip
    • Hex washer head
    • Fully removable
    Add To CartDone
  • PFM1411800

    [Pack of 50] DeWalt PFM1411380 1/2″ x 3″ Screw-Bolt+ Concrete Screw Anchor, Hex Washer Head, Zinc

    $65.99

    Features

    • PFM1411380 is designed for standard ANSI tolerance drill bits
    • Patented thread design offers low installation torque
    • Tough threads for tapping high strength concrete
    • Ratchet teeth on underside of hex washer head lock against the fixture
    • Can be installed closer to the edge than traditional expansion anchors
    Add To CartDone
  • PFM1411800

    [Pack of 100] DeWalt PFM1411060 1/4″ x 2-1/4″ Screw-Bolt+ Concrete Screw Anchor, Hex Washer Head, Zinc

    $39.99

    Features

    • PFM1411060 is designed for standard ANSI tolerance drill bits
    • Patented thread design offers low installation torque
    • Tough threads for tapping high strength concrete
    • Ratchet teeth on underside of hex washer head lock against the fixture
    • Can be installed closer to the edge than traditional expansion anchors
    Add To CartDone
  • 7446SD1-PWR concrete wedge anchor

    [Pack of 50] DeWalt 7415SD1-PWR 3/8 X 3-3/4 Power-Stud Plus SD1 Wedge Expansion Anchor

    $23.35

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • THD50600WH[15 Pack] Simpson Strong-Tie THD50600WH Titen HD 1/2 in. x 6 in. Washer-Head Heavy-Duty Screw Anchor product image

    [15 Pack] Simpson Strong-Tie THD50600WH Titen HD 1/2 in. x 6 in. Washer-Head Heavy-Duty Screw Anchor

    $43.92

    Features

    • THD50600WH is tested in accordance with ACI 355.2 and AC193
    • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
    • Washer head allows screw anchor applications incompatible with a hex head
    Add To CartDone
  • THDB62100WH[10 Pack] Simpson Strong-Tie THDB62100WH Titen HD 5/8 in. x 10 in. Washer-Head Heavy-Duty Screw Anchor product image

    [10 Pack] Simpson Strong-Tie THDB62100WH Titen HD 5/8 in. x 10 in. Washer-Head Heavy-Duty Screw Anchor

    $87.26

    Features

    • THDB62100WH is tested in accordance with ACI 355.2 and AC193
    • For added convenience, a 1/2″ socket adapter and (2) T-drive bits are included in each box
    • Washer head allows screw anchor applications incompatible with a hex head
    Add To CartDone
  • Simpson Strong-Tie STB2-75812 Strong-Bolt 2 3/4 in. x 8-1/2 in. Wedge Anchor product imageSTB2-75812

    Simpson Strong-Tie STB2-75812 Strong-Bolt 2 3/4 in. x 8-1/2 in. Wedge Anchor

    $5.53

    Features:

    • STB2-75812 offers a chamfered top designed to prevent mushrooming during installation
    • Qualified for static and seismic loading conditions (seismic design categories A through F)
    • Suitable for horizontal, vertical and overhead applications
    • Qualified for minimum concrete thickness of 3-1/4 in., and lightweight concrete-over-steel deck thickness of 2-1/2 in. and 3-1/4 in.
    • Tested per ACI355.2 and AC193
    Add To CartDone
  • PFM1411800

    [Pack of 100] DeWalt PFM1411100 1/4″ x 3″ Screw-Bolt+ Concrete Screw Anchor, Hex Washer Head, Zinc

    $39.90

    Features

    • PFM1411100 is designed for standard ANSI tolerance drill bits
    • Patented thread design offers low installation torque
    • Tough threads for tapping high strength concrete
    • Ratchet teeth on underside of hex washer head lock against the fixture
    • Can be installed closer to the edge than traditional expansion anchors
    Add To CartDone
  • 02820-PWR

    [Pack of 100] Dewalt 02814-PWR 1/4″ X 1-1/4″ Zamac Nailin Hammer Drive Anchor, Mushroom Head

    $10.99

    Features

    • General purpose anchoring
    • 02814-PWR installs in a variety of base materials
    • Roof Flashing
    • Mechanical Attachments
    Add To CartDone
  • THD50234RHTHD50234RH

    [50 Pack] Simpson Strong-Tie THD50234RH Titen HD 3/8 in. x 2-3/4 in. Threaded Rod Hanger for 1/2-in. Rod

    $93.08

    Features

    • Installs with standard-sized sockets
    • THD50234RH is code listed for cracked and uncracked concrete applications under the 2015, 2012 and 2009 IBC/IRC, per ICC-ES ESR-2713
    • FM listed
    Add To CartDone
  • THDB62600WHTHDB62600WH

    [10 Pack] Simpson Strong-Tie THDB62600WH Titen HD 5/8 in. x 6 in. Washer-Head Heavy-Duty Screw Anchor

    $49.43

    Features

    • THDB62600WH is tested in accordance with ACI 355.2 and AC193
    • Qualified for static, wind and seismic loading conditions
    • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
    • Washer head allows screw anchor applications incompatible with a hex head
    Add To CartDone
  • THDB62800HMGTHDB62800HMG

    [10 Pack] Simpson Strong-Tie THDB62800HMG Titen HD 5/8 in. x 8 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $118.46

    Features

    • THDB62800HMG is tested in accordance with ACI 355.2, AC193 and AC106
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THD50600HMGF1THD50600HMGF1

    Simpson Strong-Tie THD50600HMGF1 Titen HD 1/2 in. x 6 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $4.95

    Features

    • THD50600HMGF1 is tested in accordance with ACI 355.2, AC193 and AC106
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THDB62800H4SSTHDB62800H4SS

    [10 Pack] Simpson Strong-Tie THDB62800H4SS Titen HD 5/8 in. x 8 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor

    $151.23

    Features

    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • THDB62800H4SS is tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • THD37212CSTHD37212CS

    [50 Pack] Simpson Strong-Tie THD37212CS Titen HD 3/8 in. x 2-1/2 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor

    $62.17

    Features

    • THD37212CS is tested in accordance with ACI 355.2, AC193 and AC106
    • Standard fractional sizes, hole size same as anchor size
    • 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
    Add To CartDone
  • 6% OFF THDB37158RHTHDB37158RH

    [50 Pack] Simpson Strong-Tie THDB37158RH Titen HD 1/4 in. x 1-5/8 in. Threaded Rod Hanger for 3/8-in. Rod

    Original price was: $64.92.Current price is: $61.02.

    Features

    • Designed to install using a rotary hammer or hammer drill with standard ANSI drill bits — no special tools required
    • THDB37158RH is code listed for cracked and uncracked concrete applications under the 2015, 2012 and 2009 IBC/IRC, per ICC-ES ESR-2713
    • FM listed
    Add To CartDone
  • THDB62612HMGF1Simpson Strong-Tie THDB62612HMGF1 Titen HD 5/8 in. x 6-1/2 in. Mechanically Galvanized Heavy-Duty Screw Anchor product image

    Simpson Strong-Tie THDB62612HMGF1 Titen HD 5/8 in. x 6-1/2 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $11.54

    Features

    • THDB62612HMGF1 is code-listed for exterior use
    • Fully removable
    • Hex washer head
    • Optimized thread design
    Add To CartDone
  • THD50400H4SSTHD50400H4SS

    [20 Pack] Simpson Strong-Tie THD50400H4SS Titen HD 1/2 in. x 4 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor

    $140.62

    Features

    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • THD50400H4SS is tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • THDB62800H[10 Pack] Simpson Strong-Tie THDB62800H Titen HD 5/8 in. x 8 in. Heavy-Duty Screw Anchor product image

    [10 Pack] Simpson Strong-Tie THDB62800H Titen HD 5/8 in. x 8 in. Heavy-Duty Screw Anchor

    $63.19

    Features

    • THDB62800H has been tested for seismic-rated applications
    • Corrosion-resistant
    • Durable
    • Removable
    Add To CartDone
  • THD37400CSTHD37400CS

    [50 Pack] Simpson Strong-Tie THD37400CS Titen HD 3/8 in. x 4 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor

    $61.84

    Features

    • THD37400CS offers superior performance
    • Removable design
    • Reduced cam-out
    • Countersunk head profile
    Add To CartDone
  • THD37300CS[50 Pack] Simpson Strong-Tie THD37300CS Titen HD 3/8 in. x 3 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor product image

    [50 Pack] Simpson Strong-Tie THD37300CS Titen HD 3/8 in. x 3 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor

    $72.26

    Features

    • THD37300CS is tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Countersunk head allows screw anchor applications incompatible with a hex head
    Add To CartDone
  • THD50600HMGTHD50600HMG

    [20 Pack] Simpson Strong-Tie THD50600HMG Titen HD 1/2 in. x 6 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $97.23

    Features

    • High-strength performance
    • Corrosion resistance
    • Heat-treated durability
    • THD50600HMG is tested and code compliant for exterior applications
    Add To CartDone
  • THDB62500HMGTHDB62500HMG

    [10 Pack] Simpson Strong-Tie THDB62500HMG Titen HD 5/8 in. x 5 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $72.15

    Features

    • High-strength performance
    • Undercut thread design
    • Fully removable
    • THDB62500HMG is mechanically galvanized for corrosion resistance (ASTM B695 Class 65)
    Add To CartDone
  • 7446SD1-PWR concrete wedge anchor

    [Pack of 25] DeWalt 7427SD1-PWR 1/2 in x 8-1/2 in Power-Stud+ SD1 Wedge Expansion Anchor

    $33.75

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • 7446SD1-PWR concrete wedge anchor

    [Pack of 50] DeWalt 7424SD1-PWR 1/2 in x 5-1/2 in Power-Stud Plus SD1 Wedge Expansion Anchor, Carbon Steel

    $42.35

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • 7446SD1-PWR concrete wedge anchor

    [Pack of 100] DeWalt 7404SD1-PWR 1/4 X 3-1/4 Power-Stud Plus SD1 Wedge Expansion Anchor

    $24.49

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • THD50400H[20 Pack] Simpson Strong-Tie THD50400H Titen HD 1/2 in. x 4 in. Heavy-Duty Screw Anchor product image

    [20 Pack] Simpson Strong-Tie THD50400H Titen HD 1/2 in. x 4 in. Heavy-Duty Screw Anchor

    $44.99

    Features

    • THD50400H has been tested for seismic-rated applications
    • Strong grip
    • Durable build
    • Effortless installation
    Add To CartDone
  • THD37300CS6SSTHD37300CS6SS

    [25 Pack] Simpson Strong-Tie THD37300CS6SS Titen HD 3/8 in. x 3 in. Type 316 SS Countersunk Head Heavy-Duty Screw Anchor

    $144.49

    Features

    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • THD37300CS6SS is tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • THD37600HMGTHD37600HMG

    [50 Pack] Simpson Strong-Tie THD37600HMG Titen HD 3/8 in. x 6 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $188.46

    Features

    • THD37600HMG is tested in accordance with ACI 355.2, AC193 and AC106
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THDB62800H6SSTHDB62800H6SS

    [10 Pack] Simpson Strong-Tie THDB62800H6SS Titen HD 5/8 in. x 8 in. Type 316 Stainless Steel Heavy-Duty Screw Anchor

    $177.69

    Features

    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • THDB62800H6SS is tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • THDB25178CSTHDB25178CS

    [100 Pack] Simpson Strong-Tie THDB25178CS Titen HD 1/4 in. x 1-7/8 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor

    $85.18

    Features

    • THDB25178CS is tested in accordance with ACI 355.2, AC193 and AC106
    • 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
    • Countersunk head allows screw anchor applications incompatible with a hex head
    Add To CartDone
  • THDB25300HTHDB25300H

    [50 Pack] Simpson Strong-Tie THDB25300H Titen HD 1/4 in. x 3 in. Heavy-Duty Screw Anchor

    $34.79

    Features

    • THDB25300H is created with an efficient thread design
    • Seismic-rated
    • Fast installation
    • Durable & strong
    Add To CartDone
  • STB2-37334STB2-37334

    [50 Pack] Simpson Strong-Tie STB2-37334 Strong-Bolt 2 — 3/8 in. x 3-3/4 in. Wedge Anchor

    $28.49

    Features

    • STB2-37334 has a chamfered top designed to prevent mushrooming during installation
    • Qualified for static and seismic loading conditions (seismic design categories A through F)
    • Suitable for horizontal, vertical and overhead applications
    • Qualified for minimum concrete thickness of 3 1/4″, and lightweight concrete-over-steel deck thickness of 2 1/2″ and 3 1/4″
    • Standard (ANSI) fractional sizes: fits standard fixtures and installs with common drill bit and tool sizes
    Add To CartDone
  • 7422SD1-PWR7422SD1-PWR

    [Pack of 50] DeWalt 7422SD1-PWR 1/2 in. X 3-3/4 in. Power-Stud Carbon Steel Wedge Expansion Anchor

    $45.58

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • 7413SD1-PWR7413SD1-PWR

    [Pack of 50] DeWalt 7413SD1-PWR 3/8 In. x 3 In. Power Stud Carbon Steel Wedge Expansion Anchor

    $17.29

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • 7446SD1-PWR concrete wedge anchor

    [Pack of 50] DeWalt 7420SD1-PWR 1/2 X 2-3/4 Power-Stud Plus SD1 Wedge Expansion Anchor

    $36.99

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • 7446SD1-PWR concrete wedge anchor

    [Pack of 50] DeWalt 7416SD1-PWR 3/8 X 5 Power-Stud Plus SD1 Wedge Expansion Anchor

    $26.65

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone