Showing 1–40 of 67 resultsSorted by popularity
-
$36.69
Features
- Designed for use with threaded rod and reinforcing bar hardware elements
- Evaluated and recognized for freeze/thaw performance
- Cartridge design allows for multiple uses using extra mixing nozzles
- Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
- Evaluated and recognized for long term and short term loading (see performance tables)
-
$15.18
Features
- THDB25178HC20 is tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Reuse of the anchor will not achieve listed loads and is not recommended
-
$65.99
Features
- PFM1411380 is designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to the edge than traditional expansion anchors
-
- This item has been DISCONTINUED.- SEE ET3G22-N FOR UPDATED MODEL
-
$28.39
Features
- ET3G22-Nis suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
- Ideal for general doweling and threaded rod applications
- Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)
Anchor Technical Notes
-
$158.45
Features
- THD37400CS6SS is tested in accordance with ACI 355.2, AC193 and AC106
- Countersunk head allows screw anchor applications incompatible with a hex head
- Available in 1/4″ and 3/8″ diameters
-
$39.99
Features
- PFM1411060 is designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to the edge than traditional expansion anchors
-
![[10 Pack] Simpson Strong-Tie THDB62100WH Titen HD 5/8 in. x 10 in. Washer-Head Heavy-Duty Screw Anchor product image](https://www.heydensupply.com/wp-content/uploads/2023/01/10-Pack-Simpson-Strong-Tie-THDB62100WH-Titen-HD-58-in.-x-10-in.-Washer-Head-Heavy-Duty-Screw-Anchor-8-600x600.jpg "[10-Pack]-Simpson-Strong-Tie-THDB62100WH-Titen-HD-58-in.-x-10-in.-Washer-Head-Heavy-Duty-Screw-Anchor-(8)")
$87.26
Features
- THDB62100WH is tested in accordance with ACI 355.2 and AC193
- For added convenience, a 1/2″ socket adapter and (2) T-drive bits are included in each box
- Washer head allows screw anchor applications incompatible with a hex head
-
$144.49
Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THD37300CS6SS is tested in accordance with ACI355.2, AC193 and AC106
-
$39.90
Features
- PFM1411100 is designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to the edge than traditional expansion anchors
-
$10.99
Features
- DFM12720 is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
$4.95
Features
- THD50600HMGF1 is tested in accordance with ACI 355.2, AC193 and AC106
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
$244.62
Features
- THD37400H4SS is ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
$18.99
Features
- DFM12728 is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
$219.09
Features
- 3GWS5010P features an integral Cap
- Flanges
- Open-Mesh Collar
- Color-Coded, Formula-Specific Mesh
3GWS5010P Tech sheet
-
$160.00
Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THD50500H4SS is tested in accordance with ACI355.2, AC193 and AC106
-
$62.17
Features
- THD37212CS is tested in accordance with ACI 355.2, AC193 and AC106
- Standard fractional sizes, hole size same as anchor size
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
-
$183.25
Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THDC25238H6SS is tested in accordance with ACI355.2, AC193 and AC106
-
![[50 Pack] Simpson Strong-Tie THD37300CS Titen HD 3/8 in. x 3 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor product image](https://www.heydensupply.com/wp-content/uploads/2023/01/50-Pack-Simpson-Strong-Tie-THD37300CS-Titen-HD-38-in.-x-3-in.-Zinc-Plated-Countersunk-Head-Heavy-Duty-Screw-Anchor-7-600x600.jpg "[50-Pack]-Simpson-Strong-Tie-THD37300CS-Titen-HD-38-in.-x-3-in.-Zinc-Plated-Countersunk-Head-Heavy-Duty-Screw-Anchor-(7)")
$72.26
Features
- THD37300CS is tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Countersunk head allows screw anchor applications incompatible with a hex head
-
![[10 Pack] Simpson Strong-Tie THDB62100H Titen HD 5/8 in. x 10 in. Heavy-Duty Screw Anchor product image](https://www.heydensupply.com/wp-content/uploads/2023/01/10-Pack-Simpson-Strong-Tie-THDB62100H-Titen-HD-58-in.-x-10-in.-Heavy-Duty-Screw-Anchor-8-600x600.jpg "[10-Pack]-Simpson-Strong-Tie-THDB62100H-Titen-HD-58-in.-x-10-in.-Heavy-Duty-Screw-Anchor-(8)")
$79.38
Features
- High-Strength Performance
- Seismic & Wind Approved
- Heat-Treated Durability
- THDB62100H eliminates the need for a separate washer, unless directed otherwise by code
-
$87.26
Features
- THD50800WH is tested in accordance with ACI 355.2 and AC193
- Qualified for static, wind and seismic loading conditions
- Washer head allows screw anchor applications incompatible with a hex head
-
![[20 Pack] Simpson Strong-Tie THD50600H6SS Titen HD 1/2 in. x 6 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor product image](https://www.heydensupply.com/wp-content/uploads/2023/01/20-Pack-Simpson-Strong-Tie-THD50600H6SS-Titen-HD-12-in.-x-6-in.-Type-316-Stainless-Steel-Heavy-Duty-Screw-Anchor-11-600x600.jpg "[20 Pack] Simpson Strong-Tie THD50600H6SS Titen HD 12 in. x 6 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor (11)")
$231.08
Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THD50600H6SS is tested in accordance with ACI355.2, AC193 and AC106
-
$346.15
Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THD37500H is tested in accordance with ACI355.2, AC193 and AC106
-
$85.18
Features
- THDB25178CS is tested in accordance with ACI 355.2, AC193 and AC106
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
- Countersunk head allows screw anchor applications incompatible with a hex head
-
$6.07
Features:
- Qualified for static and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
- Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
- Hex-washer head requires no separate washer and provides a clean installed appearance
-
$928.99 Original price was: $928.99.$836.09Current price is: $836.09.
Features
- DGN845B includes a standard contact trip. Also compatible with the magnetic and Stick-E interchangeable contact trips (sold separately).
- Shared Pin Collation – Tool design allows for fasteners to be used in the Trak-It C6 as well as the DCN890 and DCN891.
- Improved Fuel Cell – Fastens up to 443 Linear Feet of Drywall track
- Innovative power tools designed to deliver certainty for the world’s toughest pros
- Track and manage this TOOL CONNECT CHIP-READY product (chip sold separately) in the TOOL CONNECT system
-
$15.49
[Pack of 100] DeWalt 50100-PWR .300 Head Drive Pin 3 In W-7/8 In Washer Drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in…
-
$13.39
[Pack of 100] DeWalt 50098-PWR 300 Head Drive Pin 2 1/2 W-7/8 Washer Drive pins with a .300″ head by Powers Fasteners have a specially designed point that allows it to properly penetrate into typical base materials for the purpose of permanently fastening a fixture to concrete, concrete block and structural steel. A plastic flute…
-
$13.79
[Pack of 100] DeWalt .300 Head Drive Pin 2In w-7/8In Washer 50096-PWR drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in various lengths….
-
$6.79
[Pack of 100] DeWalt .300 Head Drive Pin 1 1/2 In 50034-PWR drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in various lengths….
-
$12.75
Features
- Drive pins with a 0.300″ diameter head
- Plastic flute is mounted on the pin shank
- Fastening a fixture to concrete, concrete over steel deck, concrete masonry walls
- The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.
-
$11.50
h3>[Pack of 100] DeWalt 50026-PWR .300 Head Drive Pin 1In. Drive pins with a .300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured with a 0.143″ diameter shank in various lengths. Knurled shank designs are available to increase performance in…
-
$12.50
[Pack of 100] DeWalt 50022-PWR Powers Fasteners 3/4″ Standard Drive Pins .300 Head Drive pins with a .300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured with a 0.143″ diameter shank in various lengths. Knurled shank designs are available to…
-
$12.50
[Pack of 100] DeWalt 50012-PWR Powers Fasteners 50012-PWR 1/2″ Standard Drive Pins .300 Head Drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in…
-
$17.29
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
$47.96
Features
- 03797-PWR offer a Pre-expanded anchor design which allows for easy installation
- Mushroom and flat head Spike anchors are tamper-proof
- Forming Spike, which is removable, can be used for temporary installations
- Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
-
$59.99
Features
- 03794-PWR offers a pre-expanded anchor design, which allows for easy installation
- Mushroom and flat head Spike anchors are tamper-proof
- Forming Spike, which is removable, can be used for temporary installations
- Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
-
$19.15
Features
- DFM12724B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
-
$14.20
Features
- DFM12722B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
-
$19.95
Features
- DFM12728B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
