masonry anchoring

masonry anchoring engineered to deliver consistent, high-quality results. Ideal for a wide range of uses requiring strength and consistency.

  • AT-XP Acrylic AT-XP10 10ozSimpson Strong-Tie CDT10S Manual Dispensing Tool for 10 oz. Single-Cartridge Adhesives product image

    Simpson Strong-Tie AT-XP10 AT-XP 9.4 oz. High-Strength Acrylic Anchoring Adhesive Cartridge w/ Nozzle

    This item has been DISCONTINUED.

    • SEE AT3G10 FOR UPDATED MODEL
    Request QuoteDone SOLD OUT
  • 02820-PWR

    [Pack of 100] Dewalt 02820-PWR 1/4″ X 1-1/2″ Zamac Nailin Hammer Drive Anchor, Mushroom Head

    $16.00

    Features

    • General purpose anchoring
    • 02820-PWR installs in a variety of base materials
    • Roof Flashing
    • Mechanical Attachments
    Add To CartDone
  • PFM1411800

    [Pack of 100] DeWalt PFM1411020 1/4″ x 1-3/4″ Screw-Bolt+ Concrete Screw Anchor, Hex Washer Head, Zinc

    $29.95

    Features

    • PFM1411020 is designed for standard ANSI tolerance drill bits
    • Patented thread design offers low installation torque
    • Tough threads for tapping high strength concrete
    • Ratchet teeth on underside of hex washer head lock against the fixture
    • Can be installed closer to the edge than traditional expansion anchors
    Add To CartDone
  • THD50612HTHD50612H

    [20 Pack] Simpson Strong-Tie THD50612H Titen HD 1/2 in. x 6-1/2 in. Heavy-Duty Screw Anchor

    $65.99

    Features

    • THD50612H provides reliable anchoring
    • Optimized thread design
    • Hardened tip
    • Hex washer head
    • Fully removable
    Add To CartDone
  • THD75500HTHD75500H

    [5 Pack] Simpson Strong-Tie THD75500H Titen HD 3/4 in. x 5 in. Heavy-Duty Screw Anchor

    $38.93

    Features

    • THD75500H is tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THD50600WH[15 Pack] Simpson Strong-Tie THD50600WH Titen HD 1/2 in. x 6 in. Washer-Head Heavy-Duty Screw Anchor product image

    [15 Pack] Simpson Strong-Tie THD50600WH Titen HD 1/2 in. x 6 in. Washer-Head Heavy-Duty Screw Anchor

    $43.92

    Features

    • THD50600WH is tested in accordance with ACI 355.2 and AC193
    • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
    • Washer head allows screw anchor applications incompatible with a hex head
    Add To CartDone
  • THDB25234H[50 Pack] Simpson Strong-Tie THDB25234H Titen HD 1/4 in. x 2-3/4 in. Heavy-Duty Screw Anchor product image

    [50 Pack] Simpson Strong-Tie THDB25234H Titen HD 1/4 in. x 2-3/4 in. Heavy-Duty Screw Anchor

    $39.00

    Features

    • Efficient load transfer
    • Clean finish
    • THDB25234H is code compliant with (ACI355.2, AC193, and AC106)
    Add To CartDone
  • Simpson Strong-Tie STB2-75812 Strong-Bolt 2 3/4 in. x 8-1/2 in. Wedge Anchor product imageSTB2-75812

    Simpson Strong-Tie STB2-75812 Strong-Bolt 2 3/4 in. x 8-1/2 in. Wedge Anchor

    $5.53

    Features:

    • STB2-75812 offers a chamfered top designed to prevent mushrooming during installation
    • Qualified for static and seismic loading conditions (seismic design categories A through F)
    • Suitable for horizontal, vertical and overhead applications
    • Qualified for minimum concrete thickness of 3-1/4 in., and lightweight concrete-over-steel deck thickness of 2-1/2 in. and 3-1/4 in.
    • Tested per ACI355.2 and AC193
    Add To CartDone
  • THDB62612HTHDB62612H

    [10 Pack] Simpson Strong-Tie THDB62612H Titen HD 5/8 in. x 6-1/2 in. Heavy-Duty Screw Anchor

    $37.23

    Features

    • THDB62612H is tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • 02820-PWR

    [Pack of 100] Dewalt 02814-PWR 1/4″ X 1-1/4″ Zamac Nailin Hammer Drive Anchor, Mushroom Head

    $10.99

    Features

    • General purpose anchoring
    • 02814-PWR installs in a variety of base materials
    • Roof Flashing
    • Mechanical Attachments
    Add To CartDone
  • THDC25200H6SS[50 Pack] Simpson Strong-Tie THDC25200H6SS Titen HD 1/4 in. x 2 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor product image

    [50 Pack] Simpson Strong-Tie THDC25200H6SS Titen HD 1/4 in. x 2 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor

    $179.09

    Features

    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • THDC25200H6SS is tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • THD37400CSTHD37400CS

    [50 Pack] Simpson Strong-Tie THD37400CS Titen HD 3/8 in. x 4 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor

    $81.55

    Features

    • THD37400CS offers superior performance
    • Removable design
    • Reduced cam-out
    • Countersunk head profile
    Add To CartDone
  • THDB62600HTHDB62600H

    [10 Pack] Simpson Strong-Tie THDB62600H Titen HD 5/8 in. x 6 in. Heavy-Duty Screw Anchor

    $69.10

    Features

    • THDB62600H is tested in accordance with ACI 355.2, AC193 and AC106
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THDB25178HTHDB25178H

    [100 Pack] Simpson Strong-Tie THDB25178H Titen HD 1/4 in. x 1-7/8 in. Heavy-Duty Screw Anchor

    $68.00

    Features

    • THDB25178H is tested in accordance with ACI 355.2, AC193 and AC106
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THDB62600WHTHDB62600WH

    [10 Pack] Simpson Strong-Tie THDB62600WH Titen HD 5/8 in. x 6 in. Washer-Head Heavy-Duty Screw Anchor

    $49.43

    Features

    • THDB62600WH is tested in accordance with ACI 355.2 and AC193
    • Qualified for static, wind and seismic loading conditions
    • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
    • Washer head allows screw anchor applications incompatible with a hex head
    Add To CartDone
  • THDB62800WHTHDB62800WH

    [10 Pack] Simpson Strong-Tie THDB62800WH Titen HD 5/8 in. x 8 in. Washer-Head Heavy-Duty Screw Anchor

    $83.08

    Features

    • THDB62800WH is tested in accordance with ACI 355.2, AC193 and AC106
    • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
    • Countersunk head allows screw anchor applications incompatible with a hex head
    Add To CartDone
  • THDB62800HMGTHDB62800HMG

    [10 Pack] Simpson Strong-Tie THDB62800HMG Titen HD 5/8 in. x 8 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $118.46

    Features

    • THDB62800HMG is tested in accordance with ACI 355.2, AC193 and AC106
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THDB62600HMGTHDB62600HMG

    [10 Pack] Simpson Strong-Tie THDB62600HMG Titen HD 5/8 in. x 6 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $74.46

    Features

    • THDB62600HMG is tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THDB62800H[10 Pack] Simpson Strong-Tie THDB62800H Titen HD 5/8 in. x 8 in. Heavy-Duty Screw Anchor product image

    [10 Pack] Simpson Strong-Tie THDB62800H Titen HD 5/8 in. x 8 in. Heavy-Duty Screw Anchor

    $78.59

    Features

    • THDB62800H has been tested for seismic-rated applications
    • Corrosion-resistant
    • Durable
    • Removable
    Add To CartDone
  • THDB62612HMGF1Simpson Strong-Tie THDB62612HMGF1 Titen HD 5/8 in. x 6-1/2 in. Mechanically Galvanized Heavy-Duty Screw Anchor product image

    Simpson Strong-Tie THDB62612HMGF1 Titen HD 5/8 in. x 6-1/2 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $11.54

    Features

    • THDB62612HMGF1 is code-listed for exterior use
    • Fully removable
    • Hex washer head
    • Optimized thread design
    Add To CartDone
  • THDB62400H4SSTHDB62400H4SS

    [10 Pack] Simpson Strong-Tie THDB62400H4SS Titen HD 5/8 in. x 4 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor

    $93.23

    Features

    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • THDB62400H4SS is tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • THD50600HMGTHD50600HMG

    [20 Pack] Simpson Strong-Tie THD50600HMG Titen HD 1/2 in. x 6 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $97.23

    Features

    • High-strength performance
    • Corrosion resistance
    • Heat-treated durability
    • THD50600HMG is tested and code compliant for exterior applications
    Add To CartDone
  • THDB62500HMGTHDB62500HMG

    [10 Pack] Simpson Strong-Tie THDB62500HMG Titen HD 5/8 in. x 5 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $72.15

    Features

    • High-strength performance
    • Undercut thread design
    • Fully removable
    • THDB62500HMG is mechanically galvanized for corrosion resistance (ASTM B695 Class 65)
    Add To CartDone
  • 7446SD1-PWR concrete wedge anchor

    [Pack of 100] DeWalt 7404SD1-PWR 1/4 X 3-1/4 Power-Stud Plus SD1 Wedge Expansion Anchor

    $24.49

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • 3GWS506P3GWS506P

    [Pack of 100] Simpson Strong-Tie 3GWS506P Opti-Mesh 6 in. Epoxy Adhesive Plastic Screen Tube for 1/2 in. Rod for SET-3G

    $373.69

    Features

    • 3GWS506P features an integral Cap
    • Flanges
    • Open-Mesh Collar
    • Color-Coded, Formula-Specific Mesh

    3GWS506P Tech Sheet

    Add To CartDone
  • THDB25412CS[50 Pack] Simpson Strong-Tie THDB25412CS Titen HD 1/4 in. x 4-1/2 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor product image

    [50 Pack] Simpson Strong-Tie THDB25412CS Titen HD 1/4 in. x 4-1/2 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor

    $56.28

    Features

    • THDB25412CS is tested in accordance with ACI 355.2, AC193 and AC106
    • 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
    • Countersunk head allows screw anchor applications incompatible with a hex head

    TITEN HD

    Add To CartDone
  • THDC25238CS6SSTHDC25238CS6SS

    [25 Pack] SImpson Strong-Tie THDC25238CS6SS Titen HD 1/4 in. x 2-3/8 in. Type 316 SS Countersunk Head Heavy-Duty Screw Anchor

    $102.31

    Features

    • THDC25238CS6SS is tested in accordance with ACI 355.2, AC193 and AC106
    • 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
    • Countersunk head allows screw anchor applications incompatible with a hex head
    Add To CartDone
  • THDB25312CSTHDB25312CS

    [50 Pack] Simpson Strong-Tie THDB25312CS Titen HD 1/4 in. x 3-1/2 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor

    $53.42

    Features

    • THDB25312CS is tested in accordance with ACI 355.2, AC193 and AC106
    • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
    • 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
    Add To CartDone
  • THD37600HMGTHD37600HMG

    [50 Pack] Simpson Strong-Tie THD37600HMG Titen HD 3/8 in. x 6 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $188.46

    Features

    • THD37600HMG is tested in accordance with ACI 355.2, AC193 and AC106
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THD37500HTHD37500H

    [50 Pack] Simpson Strong-Tie THD37500H Titen HD 3/8 in. x 5 in. Heavy-Duty Screw Anchor

    $95.38

    Features

    • THD37500H is tested in accordance with ACI 355.2, AC193 and AC106
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THD37300HMGTHDB62500H

    [10 Pack] Simpson Strong-Tie THDB62500H Titen HD 5/8 in. x 5 in. Heavy-Duty Screw Anchor

    $41.85

    Features

    • High Performance
    • Efficient load transfer
    • Fast installation
    • THDB62500H is heat treated at the tip to ensure optimal hardness
    Add To CartDone
  • THDB25300HTHDB25300H

    [50 Pack] Simpson Strong-Tie THDB25300H Titen HD 1/4 in. x 3 in. Heavy-Duty Screw Anchor

    $34.79

    Features

    • THDB25300H is created with an efficient thread design
    • Seismic-rated
    • Fast installation
    • Durable & strong
    Add To CartDone
  • STB2-37334STB2-37334

    [50 Pack] Simpson Strong-Tie STB2-37334 Strong-Bolt 2 — 3/8 in. x 3-3/4 in. Wedge Anchor

    $28.49

    Features

    • STB2-37334 has a chamfered top designed to prevent mushrooming during installation
    • Qualified for static and seismic loading conditions (seismic design categories A through F)
    • Suitable for horizontal, vertical and overhead applications
    • Qualified for minimum concrete thickness of 3 1/4″, and lightweight concrete-over-steel deck thickness of 2 1/2″ and 3 1/4″
    • Standard (ANSI) fractional sizes: fits standard fixtures and installs with common drill bit and tool sizes
    Add To CartDone
  • STB2-50512STB2-50512

    [25 Pack] Simpson Strong-Tie STB2-50512 Strong-Bolt 2 — 1/2 in. x 5-1/2 in. Wedge Anchor

    Features

    • Chamfered top designed to prevent mushrooming during installation
    • Qualified for static and seismic loading conditions (seismic design categories A through F)
    • Suitable for horizontal, vertical and overhead applications
    • Qualified for minimum concrete thickness of 3 1/4″, and lightweight concrete-over-steel deck thickness of 2 1/2″ and 3 1/4″
    • Standard (ANSI) fractional sizes: fits standard fixtures and installs with common drill bit and tool sizes
    Request QuoteDone
  • 08288-PWR

    DeWalt 08288-PWR 1 In. Wire Brush for Ansi Hole No. 7 Rebar

    $13.99

    DeWalt 08288-PWR 1 In. Wire Brush for Ansi Hole No. 7 Rebar

    Add To CartDone
  • 7422SD1-PWR7422SD1-PWR

    [Pack of 50] DeWalt 7422SD1-PWR 1/2 in. X 3-3/4 in. Power-Stud Carbon Steel Wedge Expansion Anchor

    $45.58

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • 05523-PWR

    Dewalt 05523-PWR Spike Carbon Mh 1/4 X 1 1/4

    $25.59

    Features

    • 05523-PWR offers a pre-expanded anchor design allowing for easy installation
    • Mushroom and flat head Spike anchors are tamper-proof
    • Forming Spike, which is removable, can be used for temporary installations
    • Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
    Add To CartDone
  • 3GWS758P[Pack of 25] Simpson Strong-Tie 3GWS758P Opti-Mesh 8 in. Epoxy Adhesive Plastic Screen Tube for 3/4 in. Rod for SET-3G product image

    [Pack of 25] Simpson Strong-Tie 3GWS758P Opti-Mesh 8 in. Epoxy Adhesive Plastic Screen Tube for 3/4 in. Rod for SET-3G

    Original price was: $125.99.Current price is: $116.99.

    Features

    • 3GWS758P features an integral Cap
    • Flanges
    • Open-Mesh Collar
    • Color-Coded, Formula-Specific Mesh

    3GWS758PCAR Tech sheet

    Add To CartDone
  • 3GWS373P3GWS373P

    [Pack of 150] Simpson Strong-Tie 3GWS373P Opti-Mesh 3-1/2 in. Epoxy Adhesive Plastic Screen Tube for 3/8 in. Rod for SET-3G

    $507.59

    Features

    • 3GWS373P features an integral Cap
    • Flanges
    • Open-Mesh Collar
    • Color-Coded, Formula-Specific Mesh

    3GWS373P Tech sheet

    Add To CartDone
  • 3GWS626P3GWS626P

    [Pack of 50] Simpson Strong-Tie 3GWS626P Opti-Mesh 6 in. Epoxy Adhesive Plastic Screen Tube for 5/8 in. Rod for SET-3G

    Original price was: $250.99.Current price is: $230.99.

    Features

    • 3GWS626P features an integral Cap
    • Flanges
    • Open-Mesh Collar
    • Color-Coded, Formula-Specific Mesh
    Add To CartDone