jobsite equipment designed for reliable performance in demanding applications. Ideal for a wide range of uses requiring strength and consistency.
Showing 81–93 of 93 resultsSorted by popularity
-
Dewalt DCB116 40V MAX 6-Pack Charging Station
Features
- LED indicators on the DEWALT 40V Max six-pack charging station specify which batteries are ready for use or in the process of charging
- Durable and weather-resistant construction handles consistent use in rough environments
- DEWALT jobsite battery charging station automatically fills battery that is closest to a complete charge
- 10-Amp charger quickly charges each battery in order
- Carries and charges up to six lithium-ion batteries to supply power to multiple tools
-
GEC01PL 80V max [40V max X2] XGT Brushless 14″ Power Cutter Kit, with AFT, Electric Brake [8.0Ah]
$2,455.99Features
- Makita GEC01PL Delivers the power of a 75.6cc Gas Saw
- Cuts up to 15 ft. in concrete and makes 115 cuts in #5 rebar on a single charge
- No Gas, No Fumes, No Pull-Starts, Zero Limitations
- Integrated Anti-Vibration mechanism provides up to 50% less vibration when cutting
- Active Feedback-sensing Technology (AFT®) electronically turns off the motor if rotation of wheel is suddenly forced to stop
- Electric brake allows the tool to be repositioned faster for maximum productivity
-
XRV01Z 18V LXT Lithium‑Ion Cordless 4′ Concrete Vibrator, Tool Only
$485.99Features
- Makita-built motor delivers 13,000 VPM to help increase strength of concrete
- Dual-directional switch to conveniently hold the tool in either horizontal or vertical positions
- Up to 25 minute run time under load
- Compact and ergonomic design at only 58-1/2″ long
- Weighs only 7.7 lbs. with battery (battery not included) for reduced operator fatigue
-
GSC01Z 40V max XGT Brushless Cordless 7‑1/4″ Metal Cutting Saw, with Electric Brake and Chip Collector Tool Only
$655.99Features
- Makita-built brushless motor delivers up to 2X faster cutting performance*
- Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of blade is suddenly forced to stop
- XPT is engineered to provide increased dust and water resistance in harsh job site conditions
- Large 2-5/8″ cutting capacity in various metal materials including pipe, stud, channel, strut, conduit, angle, square tubing, sheet metal, and more
- Makita-built brushless motor delivers up to 160 cuts per charge in 2-1/2″ x 2-1/2′ x 1/4″ steel angle using a 40V max XGT® 4.0Ah Battery (battery not included)
-
MAC5200 3.0 HP Big Bore Air Compressor
$541.99Features
- Makita MAC5200 features a cast iron pump with Big Bore™ cylinder and piston is engineered to provide faster recovery time for improved performance
- Powerful 3.0 HP motor produces 6.5 CFM at 90 PSI for increased productivity
- Pump is oil-lubricated for cooler running temperatures and reduced wear
- Durable cast iron cylinder reduces wear and increases pump life; removable for easy maintenance
- Folding handle with low profile design for easy storage with handle folded
-
MAC320Q Quiet Series 1‑1/2 HP, 3 Gallon, Oil‑Free, Electric Air Compressor
$441.99Features
- Quiet Series design at only 60 dB for operator and crew comfort; ideal for indoor use)
- Runs at a lower RPM (1,750) resulting in longer motor and pump life)
- Complete roll-cage construction provides protection to withstand a variety of job-site, transporting, and storage environments)
- Oil-free dual-piston pump designed for maintenance-free operation)
- Lightweight design for increased job site portability)
-
MAC2400 2.5 HP Big Bore Air Compressor
$450.99Features
- Cast iron pump with Big Bore™ cylinder and piston is engineered to provide faster recovery time for improved performance
- Powerful 2.5 HP 4-Pole motor produces 4.2 CFM at 90 PSI for increased productivity and lower noise
- Roll-cage construction provides complete protection to withstand extreme jobsite environments
- Low AMP draw reduces incidences of tripped breakers at start-up
- Pump is oil-lubricated for cooler running temperatures and reduced wear
-
XRV02T 18V LXT Lithium‑Ion Cordless 8ft Concrete Vibrator Kit [5.0Ah]
$798.99Features
- Makita-built motor delivers 12,500 VPM to help increase strength of concrete
- Dual directional switch to conveniently hold the tool in either horizontal or vertical positions
- Compact and ergonomic design at only 105-1/2″ long
- Protective cover helps prevent battery contamination
- 18V LXT® Lithium-Ion 5.0 Ah battery BL1850B reaches a full charge in 45 minutes or less
-
20% OFF
Dewalt DCK2100P2 20V MAX Brushless Cordless 2-Tool Kit Including Hammer Drill/Driver with FLEXVOLT Advantage
Original price was: $495.00.$395.00Current price is: $395.00.Features
- The DCD999 Hammer Drill gets up to 42% more power** when paired with FLEXVOLT® batteries
- Both tools compatible with all DEWALT® 20V MAX* and FLEXVOLT® Batteries
- 20X BRIGHTER LED: The DCD999 3-mode LED provides lighting in dark or confined spaces up to 20x brighter than the DEWALT DCD985
- EXTENDED WORK TIME WITH LED: The DCD999 features an LED spotlight mode features 20 minute shutoff function allowing for extended work time in dark or confined spaces
- VERSATILITY: The DCF887 has application versatility with 3-speed settings
-
4% OFF
Norton CP514-350 Clipper 14 In. 2 Cycle C/O Saw
Original price was: $1,219.99.$1,171.19Current price is: $1,171.19.Features:
- Patented twin-air inlets and external rocker wheel keeps saw running clean and reduces debris being trapped in the filter
- The four-step easy start eliminates the hassle of a choke by simply turning the switch on, priming the engine, pushing the decompression button, then pulling the cord to start
- The electronic carburetor?s electromagnetic valve eliminates the standard choke and half throttle start
- CP514-350 patented iLube option automatically controls mixing of oil and fuel for maximum efficiency
-
![GRH07M1W 40V max XGT Brushless 1‑1/8" SDS‑PLUS AVT Rotary Hammer (D‑Handle) Kit w/ Dust Extractor, AFT, AWS Capable [4.0Ah] product image](https://www.heydensupply.com/wp-content/uploads/2022/09/Makita-GRH07M1W-Feature-Shot-DX15-bit-length-adjustment-600x600.jpg "Makita GRH07M1W Feature Shot (DX15 bit length adjustment)")
GRH07M1W 40V max XGT Brushless 1‑1/8″ SDS‑PLUS AVT Rotary Hammer (D‑Handle) Kit w/ Dust Extractor, AFT, AWS Capable [4.0Ah]
$798.99Features
- Constant speed control applies additional power under load
- Active Feedback-Sensing Technology
- Anti-Vibration Technology
- Dust extraction capability
- Electric brake
-
-
BFKIT18 Marshalltown Finisher’s Tote Bull Float Kit
$472.01Features
- BFKIT18 holds both 1-3/4″ and 1-3/8″ Handles
- All blades are 48″ (1219mm)
FINISHERS TOTE BULL FLOAT KIT
