Showing all 28 resultsSorted by popularity
-
$5.31 Features:
- THD50500HMG is qualified for static and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
- Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
- Hex-washer head requires no separate washer and provides a clean installed appearance
-
$65.99 Features
- PFM1411380 is designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to the edge than traditional expansion anchors
-
$83.08 Features
- THDB62800WH is tested in accordance with ACI 355.2, AC193 and AC106
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- Countersunk head allows screw anchor applications incompatible with a hex head
-
$244.62 Features
- THD37400H4SS is ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
Features
- Makita XWT15Z features 240 ft.lbs. of Fastening Torque and 430 ft.lbs. of Nut-Busting Torque
- 3 forward and 3 reverse Auto-Stop modes
- 4-speed power selection
- Weighs only 4.0 lbs. with battery
- Tool Only
-
$151.23 Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THDB62800H4SS is tested in accordance with ACI355.2, AC193 and AC106
-
$93.23 Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THDB62400H4SS is tested in accordance with ACI355.2, AC193 and AC106
-
$53.42 Features
- THDB25312CS is tested in accordance with ACI 355.2, AC193 and AC106
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
-
$41.85 Features
- High Performance
- Efficient load transfer
- Fast installation
- THDB62500H is heat treated at the tip to ensure optimal hardness
-
The CN100 from the safety equipped SuperHeavy-Duty line is a coil nailer made with die cast aluminum construction for those jobs that call for durability and holding strength. This tool is engineered with a well-balanced design that is comfortable fo anyone to use with its firm rubber grip to reduce user fatigue. The CN100 is…
-
$5.99 Features:
- Impact Tough design for high-torque use with impact drivers and wrenches
- Deep well reaches fasteners in hard-to-access spaces
- 1/4 in. hex interface fits hex impact drivers
- Hardened-core manufacturing increases strength and reduces breakage
- 3/8 in. drive end with 1/2 in. shank
-
![DeWalt DCF900H1 20V Max XR PowerStack 1/2 In. High Torque Impact Wrench with Hog Ring Anvil Kit [5.0 Ah] product image](data:image/svg+xml;nitro-empty-id=MTYyMDoyNzI0-1;base64,PHN2ZyB2aWV3Qm94PSIwIDAgNjAwIDYwMCIgd2lkdGg9IjYwMCIgaGVpZ2h0PSI2MDAiIHhtbG5zPSJodHRwOi8vd3d3LnczLm9yZy8yMDAwL3N2ZyI+PC9zdmc+ "8a0976e9870101a1ef3cf89056e901f3062259b3")
$508.99 Features
- 1030 ft-lbs of max fastening torque and 1400 ft-lbs of max breakaway torque
- 4-mode speed settings and variable speed trigger
- Precision Wrench control
- shock-absorbing battery-to-tool connection (battery sold separately)
- on-tool LED work light
-
$484.99 Features
- delivers 1420 ft-lbs of max fastening torque and 1900 ft-lbs of max breakaway torque
- Up To 102 % More Torque
- prevent overtightening and fastener run-off
- resist damage from oil, grease, and solvents with oil-resistant tool housing
-
$26.65 Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
$381.99 Features
- BL Brushless Motor delivers 740 ft.lbs. of Fastening Torque and 1,180 ft.lbs. of Nut-Busting Torque
- 3-speed power selection switch (0-900/ 0-1,000/ 0-1,800 RPM & 0-1,800/ 0-2,000/ 0-2,200 IPM) provides precise fastening control for a wide range of applications
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
- The electronically-controlled BL™ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Weighs only 7.9 lbs. with battery (battery not included) for reduced operator fatigue
-
$182.46 Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THD50400H6SS is tested in accordance with ACI355.2, AC193 and AC106
-
$155.77 Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THD50300H4SS is tested in accordance with ACI355.2, AC193 and AC106
-
$316.92 Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THD37400H6SS is tested in accordance with ACI355.2, AC193 and AC106
-
$208.31 Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THD50500H6SS is tested in accordance with ACI355.2, AC193 and AC106
-
$72.00 Features
- THD75600H4SS is designed to offer strong, reliable hold
- Fast & easy installation
- Code-compliant
- Versatile application
-
$62.38 Features
- THD37400H is tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Reuse of the anchor will not achieve listed loads and is not recommended
-
$104.15 Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- THD75500H6SS is tested in accordance with ACI355.2, AC193 and AC106
-
![[5 Pack] Simpson Strong-Tie THD75812H4SS Titen HD 3/4 in. x 8-1/2 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor product image](data:image/svg+xml;nitro-empty-id=MTg2Nzo0MDQ3-1;base64,PHN2ZyB2aWV3Qm94PSIwIDAgNjAwIDYwMCIgd2lkdGg9IjYwMCIgaGVpZ2h0PSI2MDAiIHhtbG5zPSJodHRwOi8vd3d3LnczLm9yZy8yMDAwL3N2ZyI+PC9zdmc+ "[5-Pack]-Simpson-Strong-Tie-THD75812H4SS-Titen-HD-34-in.-x-8-12-in.-Type-304-Stainless-Steel-Heavy-Duty-Screw-Anchor-(8)")
$106.85 Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THD75812H4SS is tested in accordance with ACI355.2, AC193 and AC106
-
![[5 Pack] Simpson Strong-Tie THDT75600HMG Titen HD 3/4 in. x 6 in. Mechanically Galvanized Heavy-Duty Screw Anchor product image](data:image/svg+xml;nitro-empty-id=MTg4OTozOTYx-1;base64,PHN2ZyB2aWV3Qm94PSIwIDAgNjAwIDYwMCIgd2lkdGg9IjYwMCIgaGVpZ2h0PSI2MDAiIHhtbG5zPSJodHRwOi8vd3d3LnczLm9yZy8yMDAwL3N2ZyI+PC9zdmc+ "[5-Pack]-Simpson-Strong-Tie-THDT75600HMG-Titen-HD-34-in.-x-6-in.-Mechanically-Galvanized-Heavy-Duty-Screw-Anchor-(4)")
$54.85 Features
- THDT75600HMG is tested in accordance with ACI 355.2, AC193 and AC106
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
$105.69 Features
- Hex-washer head requires no separate washer, unless required by code
- Removable —THDB62612HMG is ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
![[5 Pack] Simpson Strong-Tie THD75100H Titen HD 3/4 in. x 10 in. Heavy-Duty Screw Anchor product image](data:image/svg+xml;nitro-empty-id=MTkzMzozNDY0-1;base64,PHN2ZyB2aWV3Qm94PSIwIDAgNjAwIDYwMCIgd2lkdGg9IjYwMCIgaGVpZ2h0PSI2MDAiIHhtbG5zPSJodHRwOi8vd3d3LnczLm9yZy8yMDAwL3N2ZyI+PC9zdmc+ "[5-Pack]-Simpson-Strong-Tie-THD75100H-Titen-HD-34-in.-x-10-in.-Heavy-Duty-Screw-Anchor-(8)")
$68.15 Features
- THD75100H is tested in accordance with ACI 355.2, AC193 and AC106
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
![GWT01D 40V XGT 3/4in Sq. Drive Impact Wrench Kit 4-Speed High-Torque w/ Friction Ring Anvil [2.5Ah] product image](data:image/svg+xml;nitro-empty-id=MTk1NToxNjM1-1;base64,PHN2ZyB2aWV3Qm94PSIwIDAgNjAwIDYwMCIgd2lkdGg9IjYwMCIgaGVpZ2h0PSI2MDAiIHhtbG5zPSJodHRwOi8vd3d3LnczLm9yZy8yMDAwL3N2ZyI+PC9zdmc+)
$808.99 Features
- 1,510 ft.lbs. of Nut-Busting Torque and 1,330 ft.lbs. of Fastening Torque
- 3 forward and 3 reverse Auto-Stop modes
- 4-speed power selection switch
- Compact length at only 8-1/2in
- Ultra-smooth variable speed trigger
-
$2.24 Features:
- THD50300H is qualified for static and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
- Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
- Hex-washer head requires no separate washer and provides a clean installed appearance
